ubuntu ip设置

在Debian(ubuntu就是Debian类linux)中网卡的设置可以通过/etc/network/interfaces文件来进行,具体可分为三种不同的配置方式:DHCP自动获取、静态分配IP地址和PPPoE宽带拨号。 

具体设置如下: 在进行配置之前,首先进入/etc/network目录中,编辑interfaces文件: 

网卡通过DHCP自动获取IP地址 

# This file describes the network interfaces available on your system 
# and how to activate them. For more information, see interfaces(5). 

# The loopback network interface(配置环回口) 
# 开机自动激lo接口 
auto lo 
# 配置lo接口为环回口 
iface lo inet loopback 

# The primary network interface (配置主网络接口) 
#开机自动激活eth0接口 
auto eth0 
#配置eth0接口为DHCP自动获取 
iface eth0 inet dhcp

网卡静态分配IP地址 

# This file describes the network interfaces available on your system 
# and how to activate them. For more information, see interfaces(5). 

# The loopback network interface(配置环回口) 
# 开机自动激lo接口 
auto lo 
# 配置lo接口为环回口 
iface lo inet loopback 

# The primary network interface (配置主网络接口) 
#开机自动激活eth0接口 
auto eth0 
#配置eth0接口为静态设置IP地址 
iface eth0 inet static 
address 10.16.3.99 
netmask 255.255.255.0 
network 10.16.3.0 
broadcast 10.16.3.255 
gateway 10.16.3.1 
# dns-* options are implemented by the resolvconf package, if installed(DNS设置) 
dns-nameservers 61.153.177.196 61.153.177.197 
dns-search fireteam.org 
网卡进行PPPoE宽带拨号配置 

# This file describes the network interfaces available on your system 
# and how to activate them. For more information, see interfaces(5). 

# The loopback network interface(配置环回口) 
# 开机自动激lo接口 
auto lo 
# 配置lo接口为环回口 
iface lo inet loopback 

# The primary network interface (配置主网络接口) 
#开机自动激活eth0接口 
auto eth0 
#配置eth0接口为静态设置IP地址 
iface eth0 inet static 
address 10.16.3.99 
netmask 255.255.255.0 
network 10.16.3.0 
broadcast 10.16.3.255 

配置完毕后,重启计算机或网络服务即可将网卡配好。重启网络服务命令为:

sudo /etc/init.d/networking restart

原文地址:https://www.cnblogs.com/whuqin/p/4982150.html