RAC添加节点：
环境：
OS：OEL5.6
RAC：10.2.0.1.0
原有rac1,rac2两个节点。如今要添加rac3节点：
操作过程：
改动三个节点上的/etc/hosts文件
192.168.90.2 rac1
192.168.90.5 rac2
192.168.90.6 rac3
192.168.91.3 rac1-priv
192.168.91.6 rac2-priv
192.168.91.7 rac3-priv
192.168.90.3 rac1-vip
192.168.90.4 rac2-vip
192.168.90.7 rac3-vip
rac3节点上安装须要的rpm包，本实验环境使用的是OEL系统，所以使用oracle-validated。
[root@rac3 ~]# mount /dev/cdrom /mnt
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@rac3 ~]# vi /etc/yum.repos.d/public-yum-el5.repo
[oel5]
name = Enterprise Linux 5.6 DVD
baseurl=file:///mnt/Server/
gpgcheck=0
enabled=1
[root@rac3 ~]# yum install oracle-validated
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
......略
安装ASMLib包：
[root@rac3 ~]# cd /mnt/Server
[root@rac3 Server]# rpm -ivh oracleasm-support-2.1.4-1.el5.i386.rpm
warning: oracleasm-support-2.1.4-1.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [100%]
[root@rac3 Server]# rpm -ivh oracleasm-2.6.18-238.el5-2.0.5-1.el5.i686.rpm
warning: oracleasm-2.6.18-238.el5-2.0.5-1.el5.i686.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Preparing... ########################################### [100%]
1:oracleasm-2.6.18-238.el########################################### [100%]
配置3节点和1,2节点间的互信：
3节点：
[oracle@rac3 ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/oracle/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/oracle/.ssh/id_rsa.
Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
The key fingerprint is:
18:d5:6a:94:4c:12:90:8a:19:ca:96:4d:97:cc:fe:f0 oracle@rac3
1节点：
[oracle@rac1 .ssh]$ ssh 192.168.90.6 cat ~/.ssh/*.pub >> authorized_keys
oracle@192.168.90.6's password:
[oracle@rac1 .ssh]$ scp authorized_keys 192.168.90.6:~/.ssh/.
oracle@192.168.90.6's password:
authorized_keys 100% 1780 1.7KB/s 00:00
[oracle@rac1 .ssh]$ scp authorized_keys 192.168.90.5:~/.ssh/.
authorized_keys 100% 1780 1.7KB/s 00:00
各个节点运行下面脚本測试oracle用户的互信：
ssh rac1 date
ssh rac2 date
ssh rac3 date
ssh rac1-priv date
ssh rac2-priv date
ssh rac3-priv date
配置时间同步：
[root@rac3 Server]# ntpdate 192.168.90.2
22 Aug 10:45:31 ntpdate[9511]: adjust time server 192.168.90.2 offset -0.109663 sec
[root@rac3 Server]# crontab -e
* * * * * /usr/sbin/ntpdate 192.168.90.2 >> /ntp.log
因为使用的是openfiler作为存储，这里加入openfiler配置过程：
然后到rac3节点上配置：
[root@rac3 ~]# vi /etc/iscsi/initiatorname.iscsi
#InitiatorName=iqn.1988-12.com.oracle:48354521e5f2
InitiatorName=rac3
[root@rac3 ~]# iscsiadm -m discovery -t st -p 192.168.90.8
192.168.90.8:3260,1 rac3
[root@rac3 ~]# service iscsi restart
Stopping iSCSI daemon:
iscsid is stopped [ OK ]
Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: Logging in to [iface: default, target: rac3, portal: 192.168.90.8,3260]
Login to [iface: default, target: rac3, portal: 192.168.90.8,3260] successful.
[ OK ]
然后看一下磁盘是否挂载成功：
[root@rac3 ~]# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 5221 41833260 8e Linux LVM
Disk /dev/dm-0: 39.5 GB, 39594229760 bytes
255 heads, 63 sectors/track, 4813 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/sdb: 1073 MB, 1073741824 bytes
34 heads, 61 sectors/track, 1011 cylinders
Units = cylinders of 2074 * 512 = 1061888 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 1011 1048376+ 83 Linux
Disk /dev/sdc: 1073 MB, 1073741824 bytes
34 heads, 61 sectors/track, 1011 cylinders
Units = cylinders of 2074 * 512 = 1061888 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 1011 1048376+ 83 Linux
Disk /dev/sdd: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 10240 10485744 83 Linux
Disk /dev/sde: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 10240 10485744 83 Linux
Disk /dev/sdf: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 10240 10485744 83 Linux
挂载成功之后。配置设备固定化：
[root@rac3 ~]# raw /dev/raw/raw1 /dev/sdb1
/dev/raw/raw1: bound to major 8, minor 17
[root@rac3 ~]# raw /dev/raw/raw2 /dev/sdc1
/dev/raw/raw2: bound to major 8, minor 33
[root@rac3 ~]# raw /dev/raw/raw3 /dev/sdd1
/dev/raw/raw3: bound to major 8, minor 49
[root@rac3 ~]# raw /dev/raw/raw4 /dev/sde1
/dev/raw/raw4: bound to major 8, minor 65
[root@rac3 ~]# raw /dev/raw/raw5 /dev/sdf1
/dev/raw/raw5: bound to major 8, minor 81
[root@rac3 ~]# vi /etc/udev/rules.d/60-raw.rules
添加下面内容：
ACTION=="add", KERNEL=="/dev/sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="17", RUN+="/bin/raw /dev/raw/raw1 %M %m"
ACTION=="add", KERNEL=="/dev/sdc1", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="33", RUN+="/bin/raw /dev/raw/raw2 %M %m"
ACTION=="add", KERNEL=="/dev/sdd1", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="49", RUN+="/bin/raw /dev/raw/raw3 %M %m"
ACTION=="add", KERNEL=="/dev/sde1", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="65", RUN+="/bin/raw /dev/raw/raw4 %M %m"
ACTION=="add", KERNEL=="/dev/sdf1", RUN+="/bin/raw /dev/raw/raw5 %N"
ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="81", RUN+="/bin/raw /dev/raw/raw5 %M %m"
KERNEL=="raw[1-5]", OWNER="oracle", GROUP="oinstall", MODE="640"
ASMLib配置：
[root@rac3 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
[root@rac3 ~]# /etc/init.d/oracleasm listdisks
ASM01
ASM02
ASM03
rac3节点上创建/u01文件夹，并授予oracle：
[root@rac3 ~]# mkdir /u01
[root@rac3 ~]# chown oracle:oinstall /u01
节点一：
[oracle@rac1 ~]$ cd $CRS_HOME/oui/bin/
[oracle@rac1 bin]$ ls
addLangs.sh lsnodes resource runInstaller
addNode.sh ouica.sh runConfig.sh runInstaller.sh
[oracle@rac1 bin]$ sh addNode.sh
[root@rac3 ~]# /u01/app/oracle/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
[root@rac1 ~]# /u01/app/oracle/product/10.2.0/db_1/install/rootaddnode.sh
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Attempting to add 1 new nodes to the configuration
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 3: rac3 rac3-priv rac3
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
/u01/app/oracle/product/10.2.0/db_1/bin/srvctl add nodeapps -n rac3 -A rac3-vip/255.255.255.0/eth0 -o /u01/app/oracle/product/10.2.0/db_1
[root@rac3 ~]# /u01/app/oracle/product/10.2.0/db_1/root.sh
WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
OCR LOCATIONS = /dev/raw/raw1
OCR backup directory '/u01/app/oracle/product/10.2.0/db_1/cdata/crs' does not exist. Creating now
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
rac1
rac2
rac3
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
/u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
rac3节点安装数据库软件：
rac1节点上上使用oracle用户运行$ORACLE_HOME/oui/bin/addNode.sh
[root@rac3 ~]# /u01/app/oracle/product/10.2.0/db_2/root.sh
Running Oracle10 root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.2.0/db_2
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
然后在rac1节点上使用dbca加入instance：
至此节点加入完成：
[oracle@rac1 crsd]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....B1.inst application ONLINE ONLINE rac1
ora....B2.inst application ONLINE ONLINE rac2
ora....B3.inst application ONLINE ONLINE rac3
ora.RACDB.db application ONLINE ONLINE rac2
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2
ora....SM3.asm application ONLINE ONLINE rac3
ora....C3.lsnr application ONLINE ONLINE rac3
ora.rac3.gsd application ONLINE ONLINE rac3
ora.rac3.ons application ONLINE ONLINE rac3
ora.rac3.vip application ONLINE ONLINE rac3