redis 实现发布/订阅模式

 

类似于MQ的主题模式-只能消费订阅之后发布的消息，一个消息可以被多个订阅者消费)

1.客户端发布/订阅

1.1   普通的发布/订阅

 　　除了实现任务队列外，redis还提供了一组命令可以让开发者实现"发布/订阅"(publish/subscribe)模式。"发布/订阅"模式同样可以实现进程间的消息传递，其原理如下:

　　"发布/订阅"模式包含两种角色，分别是发布者和订阅者。订阅者可以订阅一个或者多个频道(channel),而发布者可以向指定的频道(channel)发送消息，所有订阅此频道的订阅者都会收到此消息。

(1)发布消息

　　发布者发布消息的命令是  publish,用法是 publish channel message，如向 channel1.1说一声hi

127.0.0.1:6379> publish channel:1 hi
(integer) 0

这样消息就发出去了。返回值表示接收这条消息的订阅者数量。发出去的消息不会被持久化，也就是有客户端订阅channel:1后只能接收到后续发布到该频道的消息，之前的就接收不到了。

(2)订阅频道

　　订阅频道的命令是 subscribe，可以同时订阅多个频道，用法是 subscribe channel1 [channel2 ...],例如新开一个客户端订阅上面频道:(不会收到消息，因为不会收到订阅之前就发布到该频道的消息)

127.0.0.1:6379> subscribe channel:1
Reading messages... (press Ctrl-C to quit)
1) "subscribe"
2) "channel:1"
3) (integer) 1

执行上面命令客户端会进入订阅状态，处于此状态下客户端不能使用除subscribe、unsubscribe、psubscribe和punsubscribe这四个属于"发布/订阅"之外的命令，否则会报错。

　　进入订阅状态后客户端可能收到3种类型的回复。每种类型的回复都包含3个值，第一个值是消息的类型，根据消类型的不同，第二个和第三个参数的含义可能不同。

消息类型的取值可能是以下3个:

　　(1)subscribe。表示订阅成功的反馈信息。第二个值是订阅成功的频道名称，第三个是当前客户端订阅的频道数量。

　　(2)message。表示接收到的消息，第二个值表示产生消息的频道名称，第三个值是消息的内容。

　　(3)unsubscribe。表示成功取消订阅某个频道。第二个值是对应的频道名称，第三个值是当前客户端订阅的频道数量，当此值为0时客户端会退出订阅状态，之后就可以执行其他非"发布/订阅"模式的命令了。

(3)第一个客户端重新向channel:1发送一条消息

127.0.0.1:6379> publish channel:1 hi
(integer) 1

返回值表示订阅此频道的数量

c

上面订阅的客户端:

127.0.0.1:6379> subscribe channel:1
Reading messages... (press Ctrl-C to quit)
1) "subscribe"
2) "channel:1"
3) (integer) 1
1) "message"
2) "channel:1"
3) "hi"

红字部分表示成功的收到消息(依次是消息类型，频道，消息内容)

1.2   按照规则发布/订阅

　　除了可以使用subscribe命令订阅指定的频道外，还可以使用psubscribe命令订阅指定的规则。规则支持通配符格式。命令格式为      psubscribe pattern [pattern ...]订阅多个模式的频道。

　　通配符中?表示1个占位符，*表示任意个占位符(包括0)，?*表示1个以上占位符。

例如:

(1)订阅者订阅三个通配符频道

127.0.0.1:6379> psubscribe c? b* d?*
Reading messages... (press Ctrl-C to quit)
1) "psubscribe"
2) "c?"
3) (integer) 1
1) "psubscribe"
2) "b*"
3) (integer) 2
1) "psubscribe"
2) "d?*"
3) (integer) 3

(2)新开一个客户端发送到指定频道

C:Usersliqiang>redis-cli
127.0.0.1:6379> publish c m1
(integer) 0
127.0.0.1:6379> publish c1 m1
(integer) 1
127.0.0.1:6379> publish c11 m1
(integer) 0
127.0.0.1:6379> publish b m1
(integer) 1
127.0.0.1:6379> publish b1 m1
(integer) 1
127.0.0.1:6379> publish b11 m1
(integer) 1
127.0.0.1:6379> publish d m1
(integer) 0
127.0.0.1:6379> publish d1 m1
(integer) 1
127.0.0.1:6379> publish d11 m1
(integer) 1

上面返回值为1表示被订阅者所接受，可以匹配上面的通配符。

订阅者客户端:

127.0.0.1:6379> psubscribe c? b* d?*
Reading messages... (press Ctrl-C to quit)
1) "psubscribe"
2) "c?"
3) (integer) 1
1) "psubscribe"
2) "b*"
3) (integer) 2
1) "psubscribe"
2) "d?*"
3) (integer) 3
1) "pmessage"
2) "c?"
3) "c1"
4) "m1"
1) "pmessage"
2) "b*"
3) "b"
4) "m1"
1) "pmessage"
2) "b*"
3) "b1"
4) "m1"
1) "pmessage"
2) "b*"
3) "b11"
4) "m1"
1) "pmessage"
2) "d?*"
3) "d1"
4) "m1"
1) "pmessage"
2) "d?*"
3) "d11"
4) "m1"

注意:

(1)使用psubscribe命令可以重复订阅同一个频道，如客户端执行了psubscribe c? c?*。这时向c1发布消息客户端会接受到两条消息，而同时publish命令的返回值是2而不是。.同样的，如果有另一个客户端执行了subscribe c1 和psubscribe c?*的话，向c1发送一条消息该客户顿也会受到两条消息(但是是两种类型:message和pmessage)，同时publish命令也返回2.

(2)punsubscribe命令可以退订指定的规则，用法是: punsubscribe [pattern [pattern ...]],如果没有参数则会退订所有规则。

(3)使用punsubscribe只能退订通过psubscribe命令订阅的规则，不会影响直接通过subscribe命令订阅的频道；同样unsubscribe命令也不会影响通过psubscribe命令订阅的规则。另外需要注意punsubscribe命令退订某个规则时不会将其中的通配符展开，而是进行严格的字符串匹配，所以punsubscribe * 无法退订c*规则，而是必须使用punsubscribe c*才可以退订。

2.Java程序实现发布者订阅者模式

1.生产者

import redis.clients.jedis.Jedis;

/**
 * @Author: qlq
 * @Description
 * @Date: 21:29 2018/10/9
 */
public class MessageProducer extends Thread {
    public static final String CHANNEL_KEY = "channel:1";
    private volatile int count;

    public void putMessage(String message) {
        Jedis jedis = JedisPoolUtils.getJedis();
        Long publish = jedis.publish(CHANNEL_KEY, message);//返回订阅者数量
        System.out.println(Thread.currentThread().getName() + " put message,count=" + count+",subscriberNum="+publish);
        count++;
    }

    @Override
    public synchronized void run() {
        for (int i = 0; i < 5; i++) {
            putMessage("message" + count);
        }
    }

    public static void main(String[] args) {
        MessageProducer messageProducer = new MessageProducer();
        Thread t1 = new Thread(messageProducer, "thread1");
        Thread t2 = new Thread(messageProducer, "thread2");
        Thread t3 = new Thread(messageProducer, "thread3");
        Thread t4 = new Thread(messageProducer, "thread4");
        Thread t5 = new Thread(messageProducer, "thread5");
        t1.start();
        t2.start();
        t3.start();
        t4.start();
        t5.start();
    }
}

结果:

thread1 put message,count=0,subscriberNum=0
thread1 put message,count=1,subscriberNum=0
thread1 put message,count=2,subscriberNum=0
thread1 put message,count=3,subscriberNum=0
thread1 put message,count=4,subscriberNum=0
thread4 put message,count=5,subscriberNum=0
thread4 put message,count=6,subscriberNum=0
thread4 put message,count=7,subscriberNum=0
thread4 put message,count=8,subscriberNum=0
thread4 put message,count=9,subscriberNum=0
thread5 put message,count=10,subscriberNum=0
thread5 put message,count=11,subscriberNum=0
thread5 put message,count=12,subscriberNum=0
thread5 put message,count=13,subscriberNum=0
thread5 put message,count=14,subscriberNum=0
thread2 put message,count=15,subscriberNum=0
thread2 put message,count=16,subscriberNum=0
thread2 put message,count=17,subscriberNum=0
thread2 put message,count=18,subscriberNum=0
thread2 put message,count=19,subscriberNum=0
thread3 put message,count=20,subscriberNum=0
thread3 put message,count=21,subscriberNum=0
thread3 put message,count=22,subscriberNum=0
thread3 put message,count=23,subscriberNum=0
thread3 put message,count=24,subscriberNum=0
View Code

2.消费者

(1)subscribe实现订阅消费消息(开启两个线程订阅消息)

import redis.clients.jedis.Jedis;
import redis.clients.jedis.JedisPubSub;

/**
 * @Author: qlq
 * @Description
 * @Date: 22:34 2018/10/9
 */
public class MessageConsumer implements Runnable {
    public static final String CHANNEL_KEY = "channel:1";//频道

    public static final String EXIT_COMMAND = "exit";//结束程序的消息

    private MyJedisPubSub myJedisPubSub = new MyJedisPubSub();//处理接收消息

    public void consumerMessage() {
        Jedis jedis = JedisPoolUtils.getJedis();
        jedis.subscribe(myJedisPubSub, CHANNEL_KEY);//第一个参数是处理接收消息，第二个参数是订阅的消息频道
    }

    @Override
    public void run() {
        while (true) {
            consumerMessage();
        }
    }

    public static void main(String[] args) {
        MessageConsumer messageConsumer = new MessageConsumer();
        Thread t1 = new Thread(messageConsumer, "thread5");
        Thread t2 = new Thread(messageConsumer, "thread6");
        t1.start();
        t2.start();
    }
}

/**
 * 继承JedisPubSub，重写接收消息的方法
 */
class MyJedisPubSub extends JedisPubSub {
    @Override
    /** JedisPubSub类是一个没有抽象方法的抽象类,里面方法都是一些空实现
     * 所以可以选择需要的方法覆盖,这儿使用的是SUBSCRIBE指令，所以覆盖了onMessage
     * 如果使用PSUBSCRIBE指令，则覆盖onPMessage方法
     * 当然也可以选择BinaryJedisPubSub,同样是抽象类，但方法参数为byte[]
     **/
    public void onMessage(String channel, String message) {
        System.out.println(Thread.currentThread().getName()+"-接收到消息:channel=" + channel + ",message=" + message);
        //接收到exit消息后退出
        if (MessageConsumer.EXIT_COMMAND.equals(message)) {
            System.exit(0);
        }
    }
}

我们再次启动生产者生产消息,生产者控制台:

thread5 put message,count=0,subscriberNum=2
thread5 put message,count=1,subscriberNum=2
thread5 put message,count=2,subscriberNum=2
thread5 put message,count=3,subscriberNum=2
thread5 put message,count=4,subscriberNum=2
thread3 put message,count=5,subscriberNum=2
thread3 put message,count=6,subscriberNum=2
thread3 put message,count=7,subscriberNum=2
thread3 put message,count=8,subscriberNum=2
thread3 put message,count=9,subscriberNum=2
thread2 put message,count=10,subscriberNum=2
thread2 put message,count=11,subscriberNum=2
thread2 put message,count=12,subscriberNum=2
thread2 put message,count=13,subscriberNum=2
thread2 put message,count=14,subscriberNum=2
thread4 put message,count=15,subscriberNum=2
thread4 put message,count=16,subscriberNum=2
thread4 put message,count=17,subscriberNum=2
thread4 put message,count=18,subscriberNum=2
thread4 put message,count=19,subscriberNum=2
thread1 put message,count=20,subscriberNum=2
thread1 put message,count=21,subscriberNum=2
thread1 put message,count=22,subscriberNum=2
thread1 put message,count=23,subscriberNum=2
thread1 put message,count=24,subscriberNum=2

Process finished with exit code 0

消费者控制台:

thread6-接收到消息:channel=channel:1,message=message0
thread5-接收到消息:channel=channel:1,message=message0
thread5-接收到消息:channel=channel:1,message=message1
thread6-接收到消息:channel=channel:1,message=message1
thread5-接收到消息:channel=channel:1,message=message2
thread6-接收到消息:channel=channel:1,message=message2
thread5-接收到消息:channel=channel:1,message=message3
thread6-接收到消息:channel=channel:1,message=message3
thread5-接收到消息:channel=channel:1,message=message4
thread6-接收到消息:channel=channel:1,message=message4
thread5-接收到消息:channel=channel:1,message=message5
thread6-接收到消息:channel=channel:1,message=message5
thread5-接收到消息:channel=channel:1,message=message6
thread6-接收到消息:channel=channel:1,message=message6
thread5-接收到消息:channel=channel:1,message=message7
thread6-接收到消息:channel=channel:1,message=message7
thread5-接收到消息:channel=channel:1,message=message8
thread6-接收到消息:channel=channel:1,message=message8
thread5-接收到消息:channel=channel:1,message=message9
thread6-接收到消息:channel=channel:1,message=message9
thread5-接收到消息:channel=channel:1,message=message10
thread6-接收到消息:channel=channel:1,message=message10
thread5-接收到消息:channel=channel:1,message=message11
thread6-接收到消息:channel=channel:1,message=message11
thread5-接收到消息:channel=channel:1,message=message12
thread6-接收到消息:channel=channel:1,message=message12
thread5-接收到消息:channel=channel:1,message=message13
thread6-接收到消息:channel=channel:1,message=message13
thread5-接收到消息:channel=channel:1,message=message14
thread6-接收到消息:channel=channel:1,message=message14
thread5-接收到消息:channel=channel:1,message=message15
thread6-接收到消息:channel=channel:1,message=message15
thread5-接收到消息:channel=channel:1,message=message16
thread6-接收到消息:channel=channel:1,message=message16
thread5-接收到消息:channel=channel:1,message=message17
thread6-接收到消息:channel=channel:1,message=message17
thread5-接收到消息:channel=channel:1,message=message18
thread6-接收到消息:channel=channel:1,message=message18
thread5-接收到消息:channel=channel:1,message=message19
thread6-接收到消息:channel=channel:1,message=message19
thread5-接收到消息:channel=channel:1,message=message20
thread6-接收到消息:channel=channel:1,message=message20
thread5-接收到消息:channel=channel:1,message=message21
thread6-接收到消息:channel=channel:1,message=message21
thread5-接收到消息:channel=channel:1,message=message22
thread6-接收到消息:channel=channel:1,message=message22
thread5-接收到消息:channel=channel:1,message=message23
thread6-接收到消息:channel=channel:1,message=message23
thread5-接收到消息:channel=channel:1,message=message24
thread6-接收到消息:channel=channel:1,message=message24

(2)psubscribe实现订阅消费消息(开启两个线程订阅消息)

import redis.clients.jedis.Jedis;
import redis.clients.jedis.JedisPubSub;

/**
 * @Author: qlq
 * @Description
 * @Date: 22:34 2018/10/9
 */
public class MessageConsumer implements Runnable {
    public static final String CHANNEL_KEY = "channel*";//频道

    public static final String EXIT_COMMAND = "exit";//结束程序的消息

    private MyJedisPubSub myJedisPubSub = new MyJedisPubSub();//处理接收消息

    public void consumerMessage() {
        Jedis jedis = JedisPoolUtils.getJedis();
        jedis.psubscribe(myJedisPubSub, CHANNEL_KEY);//第一个参数是处理接收消息，第二个参数是订阅的消息频道
    }

    @Override
    public void run() {
        while (true) {
            consumerMessage();
        }
    }

    public static void main(String[] args) {
        MessageConsumer messageConsumer = new MessageConsumer();
        Thread t1 = new Thread(messageConsumer, "thread5");
        Thread t2 = new Thread(messageConsumer, "thread6");
        t1.start();
        t2.start();
    }
}

/**
 * 继承JedisPubSub，重写接收消息的方法
 */
class MyJedisPubSub extends JedisPubSub {
    @Override
    public void onPMessage(String pattern, String channel, String message) {
        System.out.println(Thread.currentThread().getName()+"-接收到消息:pattern="+pattern+",channel=" + channel + ",message=" + message);
        //接收到exit消息后退出
        if (MessageConsumer.EXIT_COMMAND.equals(message)) {
            System.exit(0);
        }
    }
}

重写JedisPubSub 的onPMessage方法即可

启动生产者生产消息之后查看消费者控制台:

thread6-接收到消息:pattern=channel*,channel=channel:1,message=message0
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message0
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message1
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message1
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message2
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message2
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message3
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message3
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message4
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message4
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message5
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message5
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message6
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message6
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message7
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message7
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message8
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message8
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message9
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message9
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message10
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message10
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message11
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message11
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message12
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message12
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message13
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message13
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message14
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message14
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message15
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message15
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message16
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message16
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message17
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message17
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message18
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message18
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message19
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message19
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message20
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message20
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message21
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message21
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message22
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message22
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message23
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message23
thread5-接收到消息:pattern=channel*,channel=channel:1,message=message24
thread6-接收到消息:pattern=channel*,channel=channel:1,message=message24
View Code

补充:订阅的时候subscribe()和psubscribe()的第二个参数支持可变参数，也就是可以实现订阅多个频道。

　　至此实现了两种方式的消息队列:

　　　　redis自带的list类型(lpush和rpop或者brpop，rpush和lpop或者blpop)---blpop和brpop是阻塞读取。

　　　　"发布/订阅"模式(publish channel message 和 subscribe channel [channel ...] 或者 psubscribe pattern [pattern ...] 通配符订阅多个频道)

补充:

1.发布订阅执行订阅之后该线程处于阻塞状态，线程不会终止，如果终止线程需要退订，需要调用JedisPubSub的unsubscribe()方法

例如:

package plainTest;

import cn.xm.redisChat.util.JedisPoolUtils;
import redis.clients.jedis.Jedis;
import redis.clients.jedis.JedisPubSub;

/**
 * @Author: qlq
 * @Description
 * @Date: 23:36 2018/10/13
 */
public class Test111 {
    public static void main(String[] args) {
        Jedis jedis = JedisPoolUtils.getJedis();
        System.out.println("订阅前");
        jedis.subscribe(new JedisPubSub() {
            @Override
            public void onMessage(String channel, String message) {
                super.onMessage(channel, message);
            }
        }, "c1");
        System.out.println("订阅后");
    }
}

结果只会打印订阅前，而且线程不会终止。

为了使线程可以停止，必须退订，而且退订只能调用  JedisPubSub.unsubscribe()方法，例如:收到quit消息之后会退订，线程会回到主线程打印订阅后。

package plainTest;

import cn.xm.redisChat.util.JedisPoolUtils;
import redis.clients.jedis.Jedis;
import redis.clients.jedis.JedisPubSub;

/**
 * @Author: qlq
 * @Description
 * @Date: 23:36 2018/10/13
 */
public class Test111 {
    public static void main(String[] args) {
        Jedis jedis = JedisPoolUtils.getJedis();
        System.out.println("订阅前");
        jedis.subscribe(new JedisPubSub() {
            @Override
            public void onMessage(String channel, String message) {
                if("quit".equals(message)){
                    unsubscribe("c1");
                }
                System.out.println(message);
            }

            @Override
            public void unsubscribe(String... channels) {
                super.unsubscribe(channels);
            }
        }, "c1");
        System.out.println("订阅后");
    }
}

2.BRPOP:当给定列表内没有任何元素可供弹出的时候，连接将被BRPOP命令阻塞，直到等待超时或发现可弹出元素为止。(每次只弹出一个元素，当没有元素的时候处于阻塞，当弹出一个元素之后就会解除阻塞)

package plainTest;

import cn.xm.redisChat.util.JedisPoolUtils;
import redis.clients.jedis.Jedis;

import java.util.List;

/**
 * @Author: qlq
 * @Description
 * @Date: 23:36 2018/10/13
 */
public class Test111 {
    public static void main(String[] args) {
        Jedis jedis = JedisPoolUtils.getJedis();
        System.out.println("brpop之前");
        List<String> messages = jedis.brpop(0,"list1");
        System.out.println(messages);
        System.out.println("brpop之后");
    }
}

没有元素的时候只会打印brpop之前。

原文：https://www.cnblogs.com/qlqwjy/p/9763754.html

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/yrjns/p/12501085.html