kubernetes部署

【自动安装】

一：操作环境

操作系统 
  centos7
防火墙selinux
#systemctl stop firewalld && systemctl disable firewalld
#setenforce 0
#vim /etc/selinux/config
 SELINUX=disabled
设定/etc/host解析到所有主机

  192.168.50.128 k8s-master
  192.168.50.135 k8sr-node1

二：安装部署

2.1安装前准备

在安装部署集群前，先将三台服务器的时间通过NTP进行同步，否则，在后面的运行中可能会提示错误
  ntpdate -u 192.168.2.68(我物理机配置了ntp)

在node节点上安装redhat-ca.crt

  yum install *rhsm* -y

　　

2.2etcd集群配置

master节点配置

1.安装kubernetes etcd
 yum -y install kubernetes-master etcd

　　

2.配置etcd选项
  #vi /etc/etcd/etcd.conf

　　

#[Member]
#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
ETCD_LISTEN_PEER_URLS="http://192.168.50.128:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.50.128:2379,http://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
ETCD_MAX_WALS="5"
ETCD_NAME="etcd1"
#ETCD_SNAPSHOT_COUNT="100000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_QUOTA_BACKEND_BYTES="0"
#ETCD_MAX_REQUEST_BYTES="1572864"
#ETCD_GRPC_KEEPALIVE_MIN_TIME="5s"
#ETCD_GRPC_KEEPALIVE_INTERVAL="2h0m0s"
#ETCD_GRPC_KEEPALIVE_TIMEOUT="20s"
#
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.50.128:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.50.128:2379"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_DISCOVERY_SRV=""
ETCD_INITIAL_CLUSTER="etcd1=http://192.168.50.128:2380,etcd2=http://192.168.50.135:2380"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_STRICT_RECONFIG_CHECK="true"
#ETCD_ENABLE_V2="true"
#

nodes节点配置

1.安装部署kubernetes-node/etcd/flannel/docker
   
#yum -y install kubernetes-node etcd flannel docker

　　

2.配置k8s-node1的etcd
#vi /etc/etcd/etcd.conf

#[Member]

#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
ETCD_LISTEN_PEER_URLS="http://192.168.50.135:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.50.135:2379,http://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
ETCD_NAME="etcd2"
#ETCD_SNAPSHOT_COUNT="100000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_QUOTA_BACKEND_BYTES="0"
#ETCD_MAX_REQUEST_BYTES="1572864"
#ETCD_GRPC_KEEPALIVE_MIN_TIME="5s"
#ETCD_GRPC_KEEPALIVE_INTERVAL="2h0m0s"
#ETCD_GRPC_KEEPALIVE_TIMEOUT="20s"
#
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.50.135:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.50.135:2379"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_DISCOVERY_SRV=""
ETCD_INITIAL_CLUSTER="etcd1=http://192.168.50.128:2380,etcd2=http://192.168.50.135:2380"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_STRICT_RECONFIG_CHECK="true"
#ETCD_ENABLE_V2="true"

启动etcd cluster

  #systemctl start etcd.service
  #systemctl status etcd.service

　　

查看etcd集群状态

  
[root@k8s-master ~]# systemctl start etcd.service
[root@k8s-master ~]# etcdctl cluster-health
member 272e2ecbe3d84558 is healthy: got healthy result from http://192.168.50.128:2379
member 94b5d90215d70e1e is healthy: got healthy result from http://192.168.50.135:2379
cluster is healthy

　　 

针对几个URLS做下简单的解释：
[member]
ETCD_NAME ：ETCD的节点名
ETCD_DATA_DIR：ETCD的数据存储目录
ETCD_SNAPSHOT_COUNTER：多少次的事务提交将触发一次快照
ETCD_HEARTBEAT_INTERVAL：ETCD节点之间心跳传输的间隔，单位毫秒
ETCD_ELECTION_TIMEOUT：该节点参与选举的最大超时时间，单位毫秒
ETCD_LISTEN_PEER_URLS：该节点与其他节点通信时所监听的地址列表，多个地址使用逗号隔开，其格式可以划分为scheme://IP:PORT，这里的scheme可以是http、https
ETCD_LISTEN_CLIENT_URLS：该节点与客户端通信时监听的地址列表
[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS：该成员节点在整个集群中的通信地址列表，这个地址用来传输集群数据的地址。因此这个地址必须是可以连接集群中所有的成员的。
ETCD_INITIAL_CLUSTER：配置集群内部所有成员地址，其格式为：ETCD_NAME=ETCD_INITIAL_ADVERTISE_PEER_URLS，如果有多个使用逗号隔开
ETCD_ADVERTISE_CLIENT_URLS：广播给集群中其他成员自己的客户端地址列表

　　 

二：Kubernetes集群配置

master节点配置

1.修改master配置文件
#vi /etc/kubernetes/apiserver

　　

# The address on the local server to listen to.
#KUBE_API_ADDRESS="--insecure-bind-address=127.0.0.1"
KUBE_API_ADDRESS="--address=0.0.0.0"

# The port on the local server to listen on.
KUBE_API_PORT="--port=8080"

# Port minions listen on
KUBELET_PORT="--kubelet-port=10250"

# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://192.168.50.128:2379,http://192.168.50.135:2379"

# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

# default admission control policies
#KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ResourceQuota"

# Add your own!
KUBE_API_ARGS=""


2.启动服务
systemctl start kube-apiserver.service 
systemctl start kube-controller-manager.service 
systemctl start kube-scheduler.service 
systemctl enable kube-apiserver.service 
systemctl enable kube-controller-manager.service 
systemctl enable kube-scheduler.service

　　 

nodes节点配置

1.修改k8s-node1的配置文件
 cat /etc/kubernetes/config

　　

# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://192.168.50.128:8080"

2.配置kubelet

cat /etc/kubernetes/kubelet

　

###
# kubernetes kubelet (minion) config

# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=127.0.0.1"

# The port for the info server to serve on
# KUBELET_PORT="--port=10250"

# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=192.168.50.135"

# location of the api-server
KUBELET_API_SERVER="--api-servers=http://192.168.50.128:8080"

# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Add your own!
KUBELET_ARGS=""

3.网络配置

在k8s-node1节点上进行配置flannel
cat /etc/sysconfig/flanneld

　　

# Flanneld configuration options

# etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://192.168.50.128:2379"

# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"

# Any additional options that you want to pass
#FLANNEL_OPTIONS=""

 启动相关服务

 systemctl start kubelet && systemctl start kube-proxy
 systemctl enable kubelet && systemctl enable kube-proxy

　　

在k8s-master上进行测试

[root@k8s-master ~]#  kubectl get nodes
NAME             STATUS    AGE
192.168.50.135   Ready     21h

　　

[root@k8s-master ~]#  etcdctl member list
272e2ecbe3d84558: name=etcd1 peerURLs=http://192.168.50.128:2380 clientURLs=http://192.168.50.128:2379 isLeader=true
94b5d90215d70e1e: name=etcd2 peerURLs=http://192.168.50.135:2380 clientURLs=http://192.168.50.135:2379 isLeader=false

　　

[root@k8s-master ~]# etcdctl cluster-health
member 272e2ecbe3d84558 is healthy: got healthy result from http://192.168.50.128:2379
member 94b5d90215d70e1e is healthy: got healthy result from http://192.168.50.135:2379
cluster is healthy

　　

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/yaohong/p/9400854.html