【iCore1S 双核心板_ARM】例程八：ADC实验——电源监控

实验原理：

　　STM32内部集成三个12位ADC，iCore1S的所有电源经过

电阻分压或者直接接入STM32的ADC的输出通道内，输入电流

经过高端电流检测芯片ZXCT1009F输入到ADC的输入通道内，

从而实现电源监控功能。　　　

实验现象：

　　iCore1S双核心板红色LED常亮，串口向终端输出电源监

控的数据。

核心代码：

int main(void)
{

  /* USER CODE BEGIN 1 */
    int i;
  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();//ÍâÉè³õʼ»¯

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();    
  MX_ADC3_Init();
  MX_USART1_UART_Init();

  /* USER CODE BEGIN 2 */
    LED_RED_ON;                                              
    
    usart1.printf("x0c");                                   
        
    usart1.printf("33[1;32;40m");                         

    usart1.printf("

hello! I am iCore1S!


");

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
  /* USER CODE END WHILE */
        for(i = 0;i < 100000;i++);
        
        //ADC采集
        for(i = 0;i < 5;i++){
            adc.read(i);
        }
        
        usart1.printf(" [V] %4.2fV, ",adc.value[0] * 6);
        usart1.printf("[I] %3.0fmA , ",adc.value[1] / 2* 1000.);
        usart1.printf("[1.2V] %4.2fV, ",adc.value[2]);
        usart1.printf("[3.3V] %4.2fV, ",adc.value[3] * 2);
        usart1.printf("[2.5V] %4.2fV
",adc.value[4] * 2);        

  /* USER CODE BEGIN 3 */

  }
  /* USER CODE END 3 */

}

static int read_adc(int channel)
{
    int i,k;
    unsigned long int temp[20] = {0};
    unsigned long int value;
    unsigned short int data[100];
    ADC_ChannelConfTypeDef channel_config;
    unsigned char channel_remap[5] = {ADC_CHANNEL_4,ADC_CHANNEL_5,ADC_CHANNEL_6,ADC_CHANNEL_7,ADC_CHANNEL_8};

    channel_config.Channel = channel_remap[channel];
    channel_config.Rank = 1;
    channel_config.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;

    for(k = 0;k < 20;k++){
        for(i = 0;i < 100;i++){
    
            HAL_ADC_ConfigChannel(&hadc3,&channel_config);
            HAL_ADC_Start(&hadc3);
            
            while(!__HAL_ADC_GET_FLAG(&hadc3,ADC_FLAG_EOC));
            data[i] = HAL_ADC_GetValue(&hadc3);
        }
        
        sort(data,100);

        for(i = 40;i < 60;i++){
            temp[k] += data[i];
        }

        temp[k] = temp[k] / 20;
    }

    value = 0;
    for(k = 0;k < 20;k++){
        value += temp[k]; 
    }
    value /= 20;

    adc.value[channel] = value * ADC_REF / 4096; 

    return value;
}

源代码下载链接：

链接：http://pan.baidu.com/s/1eRScqK6 密码：0tmn