1.添加磁盘
--添加完物理磁盘后在root用户下执行命令
1 #devfsadm #对新加设备进行在线识别和加载
2.分区
1 --显示磁盘的编号列表 2 # format 3 Searching for disks...done 4 5 6 AVAILABLE DISK SELECTIONS: 7 0. c1t0d0 <DEFAULT cyl 1302 alt 2 hd 255 sec 63> 8 /pci@0,0/pci15ad,1976@10/sd@0,0 9 1. c2t0d0 <DEFAULT cyl 1020 alt 2 hd 128 sec 32> 10 /pci@0,0/pci15ad,790@11/pci15ad,1976@2/sd@0,0 11 2. c2t1d0 <DEFAULT cyl 1020 alt 2 hd 128 sec 32> 12 /pci@0,0/pci15ad,790@11/pci15ad,1976@2/sd@1,0 13 3. c2t2d0 <DEFAULT cyl 1021 alt 2 hd 128 sec 32> 14 /pci@0,0/pci15ad,790@11/pci15ad,1976@2/sd@2,0 15 4. c2t3d0 <DEFAULT cyl 1021 alt 2 hd 128 sec 32> 16 /pci@0,0/pci15ad,790@11/pci15ad,1976@2/sd@3,0 17 18 --0. c1t0d0 代表一块磁盘（至于c0t0d0的具体含义，稍后会介绍） 19 --<DEFAULT cyl 1021 alt 2 hd 128 sec 32> 代表的是这个硬盘的大小和柱面信息 20 --/pci@0,0/pci15ad,1976@10/sd@0,0 代表的是这个硬盘的实际物理地址 21 22 --选择新添加磁盘 23 Specify disk (enter its number): 3 24 selecting c2t2d0 25 [disk formatted] --说明c2t2d0磁盘已经被格式化 26 27 28 FORMAT MENU: 29 disk - select a disk 30 type - select (define) a disk type 31 partition - select (define) a partition table 32 current - describe the current disk 33 format - format and analyze the disk 34 fdisk - run the fdisk program 35 repair - repair a defective sector 36 label - write label to the disk 37 analyze - surface analysis 38 defect - defect list management 39 backup - search for backup labels 40 verify - read and display labels 41 save - save new disk/partition definitions 42 inquiry - show vendor, product and revision 43 volname - set 8-character volume name 44 !<cmd> - execute <cmd>, then return 45 quit 46 --创建Solaris fdisk 分区 --create a fdisk partition for Solaris software 47 --通过在提示符下指定 y，创建并激活跨整个磁盘的 Solaris fdisk 分区 48 --所显示的 fdisk 菜单取决于磁盘是否存在现有 fdisk 分区 49 format>fdisk 50 No fdisk table exists. The default partition for the disk is: 51 52 a 100% "SOLARIS System" partition 53 54 Type "y" to accept the default partition, otherwise type "n" to edit the 55 partition table. 56 y 57 58 --创建和修改分片--Create and modify slices 59 format> partition 60 61 PARTITION MENU: 62 0 - change `0' partition 63 1 - change `1' partition 64 2 - change `2' partition 65 3 - change `3' partition 66 4 - change `4' partition 67 5 - change `5' partition 68 6 - change `6' partition 69 7 - change `7' partition 70 select - select a predefined table 71 modify - modify a predefined partition table 72 name - name the current table 73 print - display the current table 74 label - write partition map and label to the disk 75 !<cmd> - execute <cmd>, then return 76 quit 77 ---显示当前分区表-- VTOC－Solaris fdisk 分区被分成 10 个分片，编号为 0–9 78 partition> print 79 Current partition table (original): 80 Total disk cylinders available: 1020 + 2 (reserved cylinders) 81 82 Part Tag Flag Cylinders Size Blocks 83 0 unassigned wm 0 0 (0/0/0) 0 84 1 unassigned wm 0 0 (0/0/0) 0 85 2 backup wu 0 - 1019 1.99GB (1020/0/0) 4177920 86 3 unassigned wm 0 0 (0/0/0) 0 87 4 unassigned wm 0 0 (0/0/0) 0 88 5 unassigned wm 0 0 (0/0/0) 0 89 6 unassigned wm 0 0 (0/0/0) 0 90 7 unassigned wm 0 0 (0/0/0) 0 91 8 boot wu 0 - 0 2.00MB (1/0/0) 4096 92 9 unassigned wm 0 0 (0/0/0) 0 93 94 注 疑问？ partition时， - change `n' partition 只到7，即0-7个partition。可print时，part却是9个 95 96 --- 修改分片 0 97 partition> 0 98 Part Tag Flag Cylinders Size Blocks 99 0 unassigned wm 0 0 (0/0/0) 0 100 101 Enter partition id tag[unassigned]: --标识标记 102 Enter partition permission flags[wm]: --权限标志 103 Enter new starting cyl[0]: 0 --起始柱面 104 Enter partition size[0b, 0c, 0e, 0.00mb, 0.00gb]: 15mb --大小 105 partition> 106 107 --- 修改分片 1 108 partition> print (查看0分片的占用柱面) 109 Current partition table (unnamed): 110 Total disk cylinders available: 1020 + 2 (reserved cylinders) 111 112 Part Tag Flag Cylinders Size Blocks 113 0 unassigned wm 0 - 7 16.00MB (8/0/0) 32768 114 1 unassigned wm 0 0 (0/0/0) 0 115 2 backup wu 0 - 1019 1.99GB (1020/0/0) 4177920 116 3 unassigned wm 0 0 (0/0/0) 0 117 4 unassigned wm 0 0 (0/0/0) 0 118 5 unassigned wm 0 0 (0/0/0) 0 119 6 unassigned wm 0 0 (0/0/0) 0 120 7 unassigned wm 0 0 (0/0/0) 0 121 8 boot wu 0 - 0 2.00MB (1/0/0) 4096 122 9 unassigned wm 0 0 (0/0/0) 0 123 124 partition> 1 125 Part Tag Flag Cylinders Size Blocks 126 1 unassigned wm 0 0 (0/0/0) 0 127 128 Enter partition id tag[unassigned]: --标识标记 129 Enter partition permission flags[wm]: --权限标志 130 Enter new starting cyl[0]: 8 --0分区以柱面7结尾，1分区则以8为起点 131 Enter partition size[0b, 0c, 8e, 0.00mb, 0.00gb]: 1.95gb --分片1主要用于存储 132 partition> 133 --- 为当前分区表指定名称 134 partition> name 135 Enter table name (remember quotes): physic3 136 137 --- 将分区映射和标签写入当前磁盘。 138 139 partition> label 140 Ready to label disk, continue? y 141 142 partition> 143 144 --- 退出partition 145 partition> quit 146 147 --- VTOC－保存新的磁盘和分区信息。 148 format> save 149 Saving new disk and partition definitions 150 Enter file name["./format.dat"]: /etc/format.dat 151 format>
3 查看添加的slice的信息
3.1分片命名惯例
--对于每个一磁盘分片，通常以cxtxdxsx表示，其中c/t/d/s的含义如下：
--*C代表控制器标号。控制器位于主板上面，所谓控制器，就是控制，发出命令的器件。
--*T代表目标编号。 即分配给每个存储设备的一个唯一的硬件地址。
--*D代表磁盘编号。 这个数字反映的是目标位置上的磁盘号，即具体的磁盘
--*S代表分片编号。 通常从0～7，即分片的号码了
3.2 查看/dev/dsk/c2t2d0s1 （分区中，添加的主存储分片为1）
1 # prtvtoc /dev/dsk/c2t1d0s1 2 * /dev/dsk/c2t1d0s1 partition map 3 * 4 * Dimensions: 5 * 512 bytes/sector 6 * 32 sectors/track 7 * 128 tracks/cylinder 8 * 4096 sectors/cylinder 9 * 1022 cylinders 10 * 1020 accessible cylinders 11 * 12 * Flags: 13 * 1: unmountable 14 * 10: read-only 15 * 16 * Unallocated space: 17 * First Sector Last 18 * Sector Count Sector 19 * 4128768 49152 4177919 20 * 21 * First Sector Last 22 * Partition Tag Flags Sector Count Sector Mount Directory 23 0 0 00 0 32768 32767 24 1 0 00 32768 4091904 4124671 25 2 5 01 0 4177920 4177919 26 8 1 01 0 4096 4095 27 #
本实验只对添加裸设备做介绍，对于磁盘的挂载，属性的更改暂不做介绍
--参考oracle文档：http://docs.oracle.com/cd/E26926_01/html/E25884/disksxadd-50.html#scrolltoc