bell gx260

frontpanel 的针序

Dell certainly doesn't make it easy to upgrade their computers.

I did find a partial pinout description that might help you:
here's a diagram of the connector on the motherboard:

33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
o o o o o o x o o o o o o o o o o
o o o o o o o o o o o o o o o o o
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2

The 34-pin ribbon cable runs to a small sub-board for the front panel, which includes a 16-pin(2x8) header which gets another ribbon cable that goes to the "sub-sub-baord" for the actual poanel light and switches.

The table below shows the functions of the pins on the 34-pin connector, plus where they connect to on the 16-pin "sub-board" header.

34-Pin function 16-Pin
1 GND 3, 7, 15, 16
2 ?
3 ?
4 ?
5 ?
6 ?
7 ?
8 ?
9 GND
10 ? 11
11 GND
12 ?
13 ?
14 GND
15 ?
16 GND
17 ?
18 ?
19 GND
20 Pwr Switch 2
21 “KEY”
22 HD LED 4
23 PWR LED - 5
24 ? 13
25 GND
26 ?
27 PWR LED + 9
28 ? 8
29 GND
30 GND
31 ?
32 GND
33 ?
34 ?
用400元买了一个gx260的pc裸机,不配显示器
拆了玩玩
机箱小, 散热不是很好
拆了, 准备不要不用前端的usb接口,音频输出, 电源指示灯, 硬盘指示灯, 启动开关,小外响,机箱是否盖好的检测器,等
想直接启动cpu
在网上找了一下及尝试了一下 短接一下 19-20针可以启动机器, 凑合着使吧
原文地址:https://www.cnblogs.com/kwingmei/p/3660280.html