Linux 部署 iSCSI 服务端

Linux 部署 iSCSI 服务端

服务端实验环境

iSCSI-server ：RHEL8
IP：192.168.121.10

一、服务端安装 target 服务和 targetcli 命令行工具

  1. 只需要安装 targetcli 命令行工具就行，target 服务会一并安装好
[root@iSCSI-server ~]# yum install -y targetcli
[root@iSCSI-server ~]# systemctl start target
[root@iSCSI-server ~]# systemctl enable target
Created symlink /etc/systemd/system/multi-user.target.wants/target.service → /usr/lib/systemd/system/target.service.
[root@iSCSI-server ~]# systemctl status target
● target.service - Restore LIO kernel target configuration
   Loaded: loaded (/usr/lib/systemd/system/target.service; enabled; vendor preset: disabled)
   Active: active (exited) since Thu 2020-12-17 00:02:41 CST; 21min ago
 Main PID: 45827 (code=exited, status=0/SUCCESS)
    Tasks: 0 (limit: 11340)
   Memory: 0B
   CGroup: /system.slice/target.service

Dec 17 00:02:41 iSCSI-server systemd[1]: Starting Restore LIO kernel target configuration...
Dec 17 00:02:41 iSCSI-server target[45827]: No saved config file at /etc/target/saveconfig.json, ok, exiting
Dec 17 00:02:41 iSCSI-server systemd[1]: Started Restore LIO kernel target configuration.
  1. 启动 targetcli
[root@iSCSI-server ~]# targetcli
targetcli shell version 2.1.53
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.

/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 0]
  | o- fileio ................................................................................................. [Storage Objects: 0]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 0]
  o- loopback ......................................................................................................... [Targets: 0]
/>

二、添加存储空间

  1. 以硬盘形式添加20G存储空间（无需分区）
[root@iSCSI-server ~]# lsblk 
NAME          MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda             8:0    0   20G  0 disk 
sr0            11:0    1  7.3G  0 rom  
nvme0n1       259:0    0   80G  0 disk 
├─nvme0n1p1   259:1    0    1G  0 part /boot
└─nvme0n1p2   259:2    0   79G  0 part 
  ├─rhel-root 253:0    0   50G  0 lvm  /
  ├─rhel-swap 253:1    0    2G  0 lvm  [SWAP]
  └─rhel-home 253:2    0   27G  0 lvm  /home
  1. 以文件形式添加1G的存储空间
[root@iSCSI-server ~]# dd if=/dev/zero of=/mnt/disk.img bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 3.43664 s, 312 MB/s
[root@iSCSI-server ~]# ll -h /mnt/disk.img 
-rw-r--r--. 1 root root 1.0G Dec 17 00:36 /mnt/disk.img

三、创建iSCSI磁盘(块设备)

[root@iSCSI-server ~]# targetcli
targetcli shell version 2.1.53
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.

/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 0]        //说明：block 中创建的是以硬盘形式的存储空间
  | o- fileio ................................................................................................. [Storage Objects: 0]        //说明：fileio 中创建的是以文件形式的存储空间
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 0]
  o- loopback ......................................................................................................... [Targets: 0]
/> backstores/block create disk_one /dev/sda                    //disk_one 是磁盘名称，后面接磁盘本地存储路径
Created block storage object disk_one using /dev/sda.
/> backstores/fileio create disk_two /mnt/disk.img              //同理，disk_two是第二块磁盘名称
Created fileio disk_two with size 1073741824
/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- disk_one ...................................................................... [/dev/sda (20.0GiB) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 1]
  | | o- disk_two .................................................................. [/mnt/disk.img (1.0GiB) write-back deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 0]
  o- loopback ......................................................................................................... [Targets: 0]

四、创建服务端程序（iSCSI目标）

[root@iSCSI-server ~]# targetcli
targetcli shell version 2.1.53
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.

/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- disk_one ...................................................................... [/dev/sda (20.0GiB) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 1]
  | | o- disk_two .................................................................. [/mnt/disk.img (1.0GiB) write-back deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 0]
  o- loopback ......................................................................................................... [Targets: 0]
/> iscsi/ create iqn.2020-12.linux.iscis.server:server          //创建服务的程序，以时间命名
Created target iqn.2020-12.linux.iscis.server:server.
Created TPG 1.
Global pref auto_add_default_portal=true
Created default portal listening on all IPs (0.0.0.0), port 3260.
/>
  • 查看已经创建的服务的程序（iSCSI目标）
/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- disk_one ...................................................................... [/dev/sda (20.0GiB) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 1]
  | | o- disk_two .................................................................. [/mnt/disk.img (1.0GiB) write-back deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 1]
  | o- iqn.2020-12.linux.iscis.server:server ............................................................................. [TPGs: 1]         //刚刚创建的ISCSI目标
  |   o- tpg1 ............................................................................................... [no-gen-acls, no-auth]
  |     o- acls .......................................................................................................... [ACLs: 0]
  |     o- luns .......................................................................................................... [LUNs: 0]
  |     o- portals .................................................................................................... [Portals: 1]
  |       o- 0.0.0.0:3260 ..................................................................................................... [OK]
  o- loopback ......................................................................................................... [Targets: 0]

五、创建服务卷（逻辑单元LUN：为了让客户端识别）

/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- disk_one ...................................................................... [/dev/sda (20.0GiB) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 1]
  | | o- disk_two .................................................................. [/mnt/disk.img (1.0GiB) write-back deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 1]
  | o- iqn.2020-12.linux.iscis.server:server ............................................................................. [TPGs: 1]
  |   o- tpg1 ............................................................................................... [no-gen-acls, no-auth]
  |     o- acls .......................................................................................................... [ACLs: 0]
  |     o- luns .......................................................................................................... [LUNs: 0]
  |     o- portals .................................................................................................... [Portals: 1]
  |       o- 0.0.0.0:3260 ..................................................................................................... [OK]
  o- loopback ......................................................................................................... [Targets: 0]
/> cd /iscsi/iqn.2020-12.linux.iscis.server:server/tpg1/
/iscsi/iqn.20...r:server/tpg1> luns/ create /backstores/block/disk_one 
Created LUN 0.
/iscsi/iqn.20...r:server/tpg1> luns/ create /backstores/fileio/disk_two 
Created LUN 1.
/iscsi/iqn.20...r:server/tpg1>
  • 查看已经创建端服务卷
/iscsi/iqn.20...r:server/tpg1> ls
o- tpg1 ..................................................................................................... [no-gen-acls, no-auth]
  o- acls ................................................................................................................ [ACLs: 0]
  o- luns ................................................................................................................ [LUNs: 2]
  | o- lun0 ......................................................................... [block/disk_one (/dev/sda) (default_tg_pt_gp)]       //对应的第一块磁盘
  | o- lun1 ................................................................... [fileio/disk_two (/mnt/disk.img) (default_tg_pt_gp)]       //对应的第二块磁盘
  o- portals .......................................................................................................... [Portals: 1]
    o- 0.0.0.0:3260 ........................................................................................................... [OK]
/iscsi/iqn.20...r:server/tpg1>

六、创建客户端连接器（启用CHAP认证）

  1. 生产客户端连接器
/> cd /iscsi/iqn.2020-12.linux.iscis.server:server/tpg1/
/iscsi/iqn.20...r:server/tpg1> acls/ create iqn.2020-12.linux.iscis.server:client
Created Node ACL for iqn.2020-12.linux.iscis.server:client
Created mapped LUN 1.
Created mapped LUN 0.
/iscsi/iqn.20...r:server/tpg1>
  1. 查看创建的连接器
/iscsi/iqn.20...r:server/tpg1> ls
o- tpg1 ..................................................................................................... [no-gen-acls, no-auth]
  o- acls ................................................................................................................ [ACLs: 1]
  | o- iqn.2020-12.linux.iscis.server:client ...................................................................... [Mapped LUNs: 2]        //客户端连接器
  |   o- mapped_lun0 .................................................................................... [lun0 block/disk_one (rw)]
  |   o- mapped_lun1 ................................................................................... [lun1 fileio/disk_two (rw)]
  o- luns ................................................................................................................ [LUNs: 2]
  | o- lun0 ......................................................................... [block/disk_one (/dev/sda) (default_tg_pt_gp)]
  | o- lun1 ................................................................... [fileio/disk_two (/mnt/disk.img) (default_tg_pt_gp)]
  o- portals .......................................................................................................... [Portals: 1]
    o- 0.0.0.0:3260 ........................................................................................................... [OK]
  1. 设置CHAP认证
/iscsi/iqn.20...r:server/tpg1> cd acls/iqn.2020-12.linux.iscis.server:client/
/iscsi/iqn.20...server:client> set 
attribute  auth       global     parameter  group=     
/iscsi/iqn.20...server:client> set auth 
mutual_password=  mutual_userid=    password=         userid=           
/iscsi/iqn.20...server:client> set auth userid=admin
Parameter userid is now 'admin'.
/iscsi/iqn.20...server:client> set auth password=123456
Parameter password is now '123456'.
/iscsi/iqn.20...server:client>

七、重启target服务以及关闭防火墙

[root@iSCSI-server ~]# systemctl restart target
[root@iSCSI-server ~]# systemctl stop firewalld

查询3260端口是否开启

[root@iSCSI-server ~]# ss -anpt |grep 3260
LISTEN   0         256                 0.0.0.0:3260             0.0.0.0:*
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/itwangqiang/p/14145161.html