1>------ 已启动全部重新生成: 项目: ZERO_CHECK, 配置: Debug x64 ------
1> Checking Build System
1> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/realsense-file/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/wrappers/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/src/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/src/gl/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/hello-realsense/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/software-device/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/capture/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/callback/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/save-to-disk/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/multicam/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pointcloud/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/align/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/align-advanced/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/sensor-control/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/measure/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/depth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/color/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/distance/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/post-processing/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/record-playback/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/motion/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/gl/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-predict/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-and-image/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/trajectory/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/ar-basic/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-apriltag/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/tracking-and-depth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/convert/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/enumerate-devices/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-logger/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/terminal/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/recorder/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-update/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/data-collect/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/realsense-viewer/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/depth-quality/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/rosbag-inspector/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/benchmark/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/fw/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/src/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/tools/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/common/fw/CMakeFiles/generate.stamp is up-to-date.
2>------ 已启动全部重新生成: 项目: libusb (ExternalProjectTargetslibusblibusb), 配置: Debug x64 ------
3>------ 已启动全部重新生成: 项目: fw, 配置: Debug x64 ------
4>------ 已启动全部重新生成: 项目: realsense-file, 配置: Debug x64 ------
5>------ 已启动全部重新生成: 项目: glfw, 配置: Debug x64 ------
6>------ 已启动全部重新生成: 项目: uvc_fw, 配置: Debug x64 ------
2> Creating directories for 'libusb'
3> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/libtm/fw/CMakeLists.txt
5> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/glfw/src/CMakeLists.txt
4> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/realsense-file/CMakeLists.txt
6> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/common/fw/CMakeLists.txt
2> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/CMakeLists.txt
3> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/fw/CMakeFiles/generate.stamp is up-to-date.
5> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/src/CMakeFiles/generate.stamp is up-to-date.
4> CMake does not need to re-run because E:/LibRealsense/build/third-party/realsense-file/CMakeFiles/generate.stamp is up-to-date.
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
2> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> CMake does not need to re-run because E:/LibRealsense/build/common/fw/CMakeFiles/generate.stamp is up-to-date.
2> Performing download step (git clone) for 'libusb'
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
2> Cloning into 'libusb'...
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> lz4.c
5> context.c
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> lz4s.c
5> init.c
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3> empty.c
4> xxhash.c
6> empty.c
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> D4XX_FW_Image.c
3> fw_target.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> D4XX_RC_Image.c
3> fw_central_app.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> SR3XX_FW_Image.c
3> fw_central_bl.c
5> input.c
5> monitor.c
5> vulkan.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> window.c
5> win32_init.c
5> win32_joystick.c
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> console.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> debug.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> header.cpp
4> bag.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> bag_player.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> buffer.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> chunked_file.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> lz4_stream.cpp
5> win32_monitor.c
4> message_instance.cpp
5> win32_time.c
5> win32_thread.c
5> win32_window.c
5> wgl_context.c
5> egl_context.c
5> osmesa_context.c
4> query.cpp
4> stream.cpp
4> uncompressed_stream.cpp
4> view.cpp
4> serialization.cpp
4> duration.cpp
4> rate.cpp
4> time.cpp
2> Note: checking out '2a7372db54094a406a755f0b8548b614ba8c78ec'.
2>
2> You are in 'detached HEAD' state. You can look around, make experimental
2> changes and commit them, and you can discard any commits you make in this
2> state without impacting any branches by performing another checkout.
2>
2> If you want to create a new branch to retain commits you create, you may
2> do so (now or later) by using -b with the checkout command again. Example:
2>
2> git checkout -b <new-branch-name>
2>
2> HEAD is now at 2a7372d... Fixed -Wformat warnings by casting intptr_t to void*
2> Performing update step for 'libusb'
2> No patch step for 'libusb'
2> Performing configure step for 'libusb'
2> -- Selecting Windows SDK version 10.0.17134.0 to target Windows 10.0.18362.
2> -- The C compiler identification is MSVC 19.0.24215.1
2> -- The CXX compiler identification is MSVC 19.0.24215.1
2> -- Check for working C compiler: E:/Visual Studio 2015/install/VC/bin/x86_amd64/cl.exe
2> -- Check for working C compiler: E:/Visual Studio 2015/install/VC/bin/x86_amd64/cl.exe -- works
2> -- Detecting C compiler ABI info
2> -- Detecting C compiler ABI info - done
2> -- Detecting C compile features
2> -- Detecting C compile features - done
2> -- Check for working CXX compiler: E:/Visual Studio 2015/install/VC/bin/x86_amd64/cl.exe
2> -- Check for working CXX compiler: E:/Visual Studio 2015/install/VC/bin/x86_amd64/cl.exe -- works
2> -- Detecting CXX compiler ABI info
2> -- Detecting CXX compiler ABI info - done
2> -- Detecting CXX compile features
2> -- Detecting CXX compile features - done
2> -- Configuring done
2> -- Generating done
2>CUSTOMBUILD : CMake warning :
2> Manually-specified variables were not used by the project:
2>
2> ANDROID_ABI
2> ANDROID_STL
2> CMAKE_BUILD_TYPE
2>
2>
2> -- Build files have been written to: E:/LibRealsense/build/libusb-prefix/src/libusb-build
2> Performing build step for 'libusb'
2> Microsoft (R) 生成引擎版本 14.0.25420.1
2> 版权所有(C) Microsoft Corporation。保留所有权利。
2>
2> 生成启动时间为 2019/10/9 7:25:04。
2> 节点 1 上的项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(默认目标)。
2> 项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(1)正在节点 1 上生成“E:LibRealsenseuildlibusb-prefixsrclibusb-buildERO_CHECK.vcxproj”(2) (默认目标)。
2> PrepareForBuild:
2> 正在创建目录“x64DebugERO_CHECK”。
2> 正在创建目录“x64DebugERO_CHECKERO_CHECK.tlog”。
2> InitializeBuildStatus:
2> 正在创建“x64DebugERO_CHECKERO_CHECK.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> Checking Build System
2> CMake does not need to re-run because E:/LibRealsense/build/libusb-prefix/src/libusb-build/CMakeFiles/generate.stamp is up-to-date.
2> FinalizeBuildStatus:
2> 正在删除文件“x64DebugERO_CHECKERO_CHECK.tlogunsuccessfulbuild”。
2> 正在对“x64DebugERO_CHECKERO_CHECK.tlogERO_CHECK.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildERO_CHECK.vcxproj”(默认目标)的操作。
2> 项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(1)正在节点 1 上生成“E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj”(3) (默认目标)。
2> PrepareForBuild:
2> 正在创建目录“usb.dirDebug”。
2> 正在创建目录“E:LibRealsenseuildlibusb-prefixsrclibusb-buildDebug”。
2> 正在创建目录“usb.dirDebugusb.tlog”。
2> InitializeBuildStatus:
2> 正在创建“usb.dirDebugusb.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> Building Custom Rule E:/LibRealsense/build/third-party/libusb/CMakeLists.txt
2> CMake does not need to re-run because E:/LibRealsense/build/libusb-prefix/src/libusb-build/CMakeFiles/generate.stamp is up-to-date.
2> ClCompile:
2> E:Visual Studio 2015installVCinx86_amd64CL.exe /c /I"E:LibRealsenseuild hird-partylibusblibusb" /I"E:LibRealsenseuild hird-partylibusblibusbos" /I"E:LibRealsenseuild hird-partylibusbmsvc" /Zi /nologo /W3 /WX- /Od /Ob0 /D WIN32 /D _WINDOWS /D "CMAKE_INTDIR="Debug"" /D NDEBUG /D _CONSOLE /D _CRT_SECURE_NO_WARNINGS /D _MBCS /Gm- /RTC1 /MTd /GS /fp:precise /Zc:wchar_t /Zc:forScope /Zc:inline /Fo"usb.dirDebug\" /Fd"usb.dirDebugusb.pdb" /Gd /TC /errorReport:queue /SAFESEH:NO /utf-8 "E:LibRealsenseuild hird-partylibusblibusbcore.c" "E:LibRealsenseuild hird-partylibusblibusbdescriptor.c" "E:LibRealsenseuild hird-partylibusblibusbhotplug.c" "E:LibRealsenseuild hird-partylibusblibusbio.c" "E:LibRealsenseuild hird-partylibusblibusbstrerror.c" "E:LibRealsenseuild hird-partylibusblibusbsync.c" "E:LibRealsenseuild hird-partylibusblibusbos hreads_windows.c" "E:LibRealsenseuild hird-partylibusblibusbospoll_windows.c" "E:LibRealsenseuild hird-partylibusblibusboswindows_winusb.c" "E:LibRealsenseuild hird-partylibusblibusboswindows_nt_common.c" "E:LibRealsenseuild hird-partylibusblibusboswindows_usbdk.c"
2>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO” [E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj]
2> core.c
2> descriptor.c
2> hotplug.c
2> io.c
2> strerror.c
2> sync.c
2> threads_windows.c
2> poll_windows.c
2> windows_winusb.c
2> windows_nt_common.c
2> windows_usbdk.c
2> 正在生成代码...
2> Lib:
2> E:Visual Studio 2015installVCinx86_amd64Lib.exe /OUT:"E:LibRealsenseuildlibusb-prefixsrclibusb-buildDebugusb.lib" /NOLOGO /MACHINE:X64 /machine:x64 usb.dirDebugcore.obj
2> usb.dirDebugdescriptor.obj
2> usb.dirDebughotplug.obj
2> usb.dirDebugio.obj
2> usb.dirDebugstrerror.obj
2> usb.dirDebugsync.obj
2> usb.dirDebug hreads_windows.obj
2> usb.dirDebugpoll_windows.obj
2> usb.dirDebugwindows_winusb.obj
2> usb.dirDebugwindows_nt_common.obj
2> usb.dirDebugwindows_usbdk.obj
2> usb.vcxproj -> E:LibRealsenseuildlibusb-prefixsrclibusb-buildDebugusb.lib
2> CopyFilesToOutputDirectory:
2> 正在将文件从“usb.dirDebugusb.pdb”复制到“E:LibRealsenseuildlibusb-prefixsrclibusb-buildDebugusb.pdb”。
2> FinalizeBuildStatus:
2> 正在删除文件“usb.dirDebugusb.tlogunsuccessfulbuild”。
2> 正在对“usb.dirDebugusb.tlogusb.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj”(默认目标)的操作。
2> PrepareForBuild:
2> 正在创建目录“x64DebugALL_BUILD”。
2> 正在创建目录“x64DebugALL_BUILDALL_BUILD.tlog”。
2> InitializeBuildStatus:
2> 正在创建“x64DebugALL_BUILDALL_BUILD.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> FinalizeBuildStatus:
2> 正在删除文件“x64DebugALL_BUILDALL_BUILD.tlogunsuccessfulbuild”。
2> 正在对“x64DebugALL_BUILDALL_BUILD.tlogALL_BUILD.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(默认目标)的操作。
2>
2> 已成功生成。
2>
2> “E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(默认目标) (1) ->
2> “E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj”(默认目标) (3) ->
2> (ClCompile 目标) ->
2>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO” [E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj]
2>
2> 1 个警告
2> 0 个错误
2>
2> 已用时间 00:00:06.01
2> Performing install step for 'libusb'
2> Microsoft (R) 生成引擎版本 14.0.25420.1
2> 版权所有(C) Microsoft Corporation。保留所有权利。
2>
2> 生成启动时间为 2019/10/9 7:25:10。
2> 节点 1 上的项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildinstall.vcxproj”(默认目标)。
2> 项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildinstall.vcxproj”(1)正在节点 1 上生成“E:LibRealsenseuildlibusb-prefixsrclibusb-buildERO_CHECK.vcxproj”(2) (默认目标)。
2> InitializeBuildStatus:
2> 正在创建“x64DebugERO_CHECKERO_CHECK.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> 所有输出均为最新。
2> FinalizeBuildStatus:
2> 正在删除文件“x64DebugERO_CHECKERO_CHECK.tlogunsuccessfulbuild”。
2> 正在对“x64DebugERO_CHECKERO_CHECK.tlogERO_CHECK.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildERO_CHECK.vcxproj”(默认目标)的操作。
2> 项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildinstall.vcxproj”(1)正在节点 1 上生成“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(3) (默认目标)。
2> 项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(3)正在节点 1 上生成“E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj”(4) (默认目标)。
2> InitializeBuildStatus:
2> 正在创建“usb.dirDebugusb.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> 所有输出均为最新。
2> ClCompile:
2> 所有输出均为最新。
2> Lib:
2> 所有输出均为最新。
2> usb.vcxproj -> E:LibRealsenseuildlibusb-prefixsrclibusb-buildDebugusb.lib
2> FinalizeBuildStatus:
2> 正在删除文件“usb.dirDebugusb.tlogunsuccessfulbuild”。
2> 正在对“usb.dirDebugusb.tlogusb.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildusb.vcxproj”(默认目标)的操作。
2> InitializeBuildStatus:
2> 正在创建“x64DebugALL_BUILDALL_BUILD.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> FinalizeBuildStatus:
2> 正在删除文件“x64DebugALL_BUILDALL_BUILD.tlogunsuccessfulbuild”。
2> 正在对“x64DebugALL_BUILDALL_BUILD.tlogALL_BUILD.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildALL_BUILD.vcxproj”(默认目标)的操作。
2> PrepareForBuild:
2> 正在创建目录“x64DebugINSTALL”。
2> 正在创建目录“x64DebugINSTALLINSTALL.tlog”。
2> InitializeBuildStatus:
2> 正在创建“x64DebugINSTALLINSTALL.tlogunsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> PostBuildEvent:
2> setlocal
2> E:CMakecmake-3.12.0-rc1-win64-x64incmake.exe -DBUILD_TYPE=Debug -P cmake_install.cmake
2> if %errorlevel% neq 0 goto :cmEnd
2> :cmEnd
2> endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
2> :cmErrorLevel
2> exit /b %1
2> :cmDone
2> if %errorlevel% neq 0 goto :VCEnd
2> :VCEnd
2> -- Install configuration: "Debug"
2> -- Installing: E:/LibRealsense/build/libusb_install/lib/usb.lib
2> FinalizeBuildStatus:
2> 正在删除文件“x64DebugINSTALLINSTALL.tlogunsuccessfulbuild”。
2> 正在对“x64DebugINSTALLINSTALL.tlogINSTALL.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:LibRealsenseuildlibusb-prefixsrclibusb-buildinstall.vcxproj”(默认目标)的操作。
2>
2> 已成功生成。
2> 0 个警告
2> 0 个错误
2>
2> 已用时间 00:00:01.23
2> No test step for 'libusb'
2> Completed 'libusb'
6> uvc_fw.vcxproj -> E:LibRealsenseuildcommonfwDebuguvc_fwd.lib
5> glfw.vcxproj -> E:LibRealsenseuild hird-partyglfwsrcDebugglfw3d.lib
6> Microsoft (R) Windows (R) Resource Compiler Version 10.0.10011.16384
6>
6> Copyright (C) Microsoft Corporation. All rights reserved.
6>
6>
3> fw.vcxproj -> E:LibRealsenseuild hird-partylibtmfwDebugfwd.lib
4> realsense-file.vcxproj -> E:LibRealsenseuild hird-party
ealsense-fileDebug
ealsense-filed.lib
3> Microsoft (R) Windows (R) Resource Compiler Version 10.0.10011.16384
3>
3> Copyright (C) Microsoft Corporation. All rights reserved.
3>
3>
7>------ 已启动全部重新生成: 项目: tm, 配置: Debug x64 ------
7> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/libtm/libtm/src/CMakeLists.txt
7> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/src/CMakeFiles/generate.stamp is up-to-date.
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> Manager.cpp
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> Device.cpp
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> UsbPlugListener.cpp
7> Common.cpp
7> Log.cpp
7> Dispatcher.cpp
7> Fsm.cpp
7> Utils.cpp
7>E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcUsbPlugListener.cpp)
7> Event_lin.cpp
7> Event_bsd.cpp
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraFsm.cpp)
7> Event_win.cpp
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.cpp)
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcDevice.cpp)
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcCommon.cpp)
7>E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcinfraDispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcManager.cpp)
7> Poller_lin.cpp
7> Poller_win.cpp
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcUsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcUsbPlugListener.cpp)
7> Poller_bsd.cpp
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcUsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcDevice.cpp)
7>e:librealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcUsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0 hird-partylibtmlibtmsrcManager.cpp)
7> tm.vcxproj -> E:LibRealsenseuild hird-partylibtmlibtmsrcDebug md.lib
8>------ 已启动全部重新生成: 项目: realsense2, 配置: Debug x64 ------
8> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/CMakeLists.txt
8> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-options.cpp
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-timestamp.cpp
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-private.cpp
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-motion.cpp
8> ds5-nonmonochrome.cpp
8> ds5-device.cpp
8> ds5-color.cpp
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-active.cpp
8>E:LibRealsenselibrealsense-2.29.0srcds5ds5-device.cpp(160): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcds5ds5-device.cpp(172): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcds5ds5-device.cpp(188): warning C4244: “初始化”: 从“uint32_t”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcds5ds5-device.cpp(206): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8> ds5-factory.cpp
8> ds5-fw-update-device.cpp
8> rs_advanced_mode.cpp
8> presets.cpp
8> advanced_mode.cpp
8> ivcam-private.cpp
8> sr300.cpp
8> sr300-fw-update-device.cpp
8> l500-depth.cpp
8> l500-private.cpp
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8>E:Visual Studio 2015installVCincludexutility(2372): warning C4996: 'std::copy::_Unchecked_iterators::_Deprecate': Call to 'std::copy' with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See documentation on how to use Visual C++ 'Checked Iterators' (编译源文件 E:LibRealsenselibrealsense-2.29.0srcds5advanced_modeadvanced_mode.cpp)
8> E:Visual Studio 2015installVCincludexutility(2372): note: 参见“std::copy::_Unchecked_iterators::_Deprecate”的声明 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcds5advanced_modeadvanced_mode.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcds5advanced_modeadvanced_mode.cpp(811): note: 参见对正在编译的函数 模板 实例化“_OutIt std::copy<const _Ty*,_Ty*>(_InIt,_InIt,_OutIt)”的引用
8> with
8> [
8> _OutIt=uint8_t *,
8> _Ty=uint8_t,
8> _InIt=const uint8_t *
8> ]
8> l500-color.cpp
8> l500-device.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-depth.cpp)
8> l500-motion.cpp
8> l500-factory.cpp
8> l500-fw-update-device.cpp
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> record_device.cpp
8>E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(249): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(261): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(277): warning C4244: “初始化”: 从“uint32_t”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(295): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> record_sensor.cpp
8> playback_device.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-color.cpp)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8>e:librealsenselibrealsense-2.29.0srchw-monitor.h(337): warning C4804: “+=”: 在操作中使用类型“bool”不安全 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(71): note: 参见对正在编译的函数 模板 实例化“T librealsense::hw_monitor::get_gvd_field<bool>(const std::vector<uint8_t,std::allocator<_Ty>> &,std::size_t)”的引用
8> with
8> [
8> T=bool,
8> _Ty=uint8_t
8> ]
8>e:librealsenselibrealsense-2.29.0srchw-monitor.h(337): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8>E:Visual Studio 2015installVCincludeutility(172): warning C4244: “初始化”: 从“int”转换到“const float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(127): note: 参见对正在编译的函数 模板 实例化“std::pair<const _Kty,_Ty>::pair<int,const char(&)[11],void,0>(_Other1 &&,_Other2) noexcept(false)”的引用
8> with
8> [
8> _Kty=float,
8> _Ty=std::string,
8> _Other1=int,
8> _Other2=const char (&)[11]
8> ]
8> E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp(121): note: 参见对正在编译的函数 模板 实例化“std::pair<const _Kty,_Ty>::pair<int,const char(&)[11],void,0>(_Other1 &&,_Other2) noexcept(false)”的引用
8> with
8> [
8> _Kty=float,
8> _Ty=std::string,
8> _Other1=int,
8> _Other2=const char (&)[11]
8> ]
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-device.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-motion.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcl500l500-factory.cpp)
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> playback_sensor.cpp
8> ros_reader.cpp
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> ros_writer.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_device.cpp)
8> sql.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
ecord
ecord_sensor.cpp)
8> recorder.cpp
8>E:LibRealsenselibrealsense-2.29.0srcmocksql.cpp(74): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:Visual Studio 2015installVCincludexutility(2372): warning C4996: 'std::copy::_Unchecked_iterators::_Deprecate': Call to 'std::copy' with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See documentation on how to use Visual C++ 'Checked Iterators' (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmocksql.cpp)
8> E:Visual Studio 2015installVCincludexutility(2372): note: 参见“std::copy::_Unchecked_iterators::_Deprecate”的声明 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmocksql.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcmocksql.cpp(131): note: 参见对正在编译的函数 模板 实例化“_OutIt std::copy<unsigned char*,_Ty*>(_InIt,_InIt,_OutIt)”的引用
8> with
8> [
8> _OutIt=uint8_t *,
8> _Ty=uint8_t,
8> _InIt=unsigned char *
8> ]
8> sse-align.cpp
8>e:librealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.h(115): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp(250): note: 参见对正在编译的函数 模板 实例化“void librealsense::playback_sensor::handle_frame<librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_aad55996dde2f597b35c47176bbc58ab>,librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_3c79aff504ac0b0c2d92d4cdd85423b1>,librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_e73003d4fbf48dfdcd5375273af0f1cd>>(librealsense::frame_holder,bool,T,K,P)”的引用
8> with
8> [
8> T=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_aad55996dde2f597b35c47176bbc58ab>,
8> K=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_3c79aff504ac0b0c2d92d4cdd85423b1>,
8> P=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_e73003d4fbf48dfdcd5375273af0f1cd>
8> ]
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_device.cpp)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> sse-pointcloud.cpp
8> processing-blocks-factory.cpp
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmediaplaybackplayback_sensor.cpp)
8> align.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_writer.cpp)
8>E:Visual Studio 2015installVCincludexutility(2372): warning C4996: 'std::copy::_Unchecked_iterators::_Deprecate': Call to 'std::copy' with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See documentation on how to use Visual C++ 'Checked Iterators' (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:Visual Studio 2015installVCincludexutility(2372): note: 参见“std::copy::_Unchecked_iterators::_Deprecate”的声明 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp(707): note: 参见对正在编译的函数 模板 实例化“_OutIt std::copy<std::_Array_const_iterator<_Ty,9>,_Ty*>(_InIt,_InIt,_OutIt)”的引用
8> with
8> [
8> _OutIt=float *,
8> _Ty=float,
8> _InIt=std::_Array_const_iterator<float,9>
8> ]
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcmedia
os
os_reader.cpp)
8>E:LibRealsenselibrealsense-2.29.0srcprocssesse-pointcloud.cpp(178): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcprocssesse-pointcloud.cpp(179): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcprocssesse-pointcloud.cpp(209): warning C4244: “参数”: 从“const rs2_distortion”转换到“float”，可能丢失数据
8> colorizer.cpp
8> pointcloud.cpp
8> occlusion-filter.cpp
8> synthetic-stream.cpp
8> syncer-processing-block.cpp
8> decimation-filter.cpp
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> E:Visual Studio 2015installVCinclude ype_traits(348): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> E:Visual Studio 2015installVCincludememory(526): note: 参见对正在编译的类 模板 实例化“std::is_convertible<_Ty2 *,_Ty *>”的引用
8> with
8> [
8> _Ty2=librealsense::ptr_option<bool>,
8> _Ty=librealsense::option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8>E:LibRealsenselibrealsense-2.29.0srcprocsynthetic-stream.cpp(163): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcprocsynthetic-stream.cpp(179): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
8> spatial-filter.cpp
8>e:librealsenselibrealsense-2.29.0srcproccolorizer.h(110): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp(254): note: 参见对正在编译的函数 模板 实例化“void librealsense::colorizer::update_histogram<float>(int *,const T *,int,int)”的引用
8> with
8> [
8> T=float
8> ]
8> temporal-filter.cpp
8>e:librealsenselibrealsense-2.29.0srcproccolorizer.h(143): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> e:librealsenselibrealsense-2.29.0srcproccolorizer.h(133): note: 参见对正在编译的函数 模板 实例化“void librealsense::colorizer::colorize_pixel<T,F>(uint8_t *,int,librealsense::color_map *,T,F)”的引用
8> with
8> [
8> T=float,
8> F=librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcproccolorizer.cpp(281): note: 参见对正在编译的函数 模板 实例化“void librealsense::colorizer::make_rgb_data<float,librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>>(const T *,uint8_t *,int,int,F)”的引用
8> with
8> [
8> T=float,
8> F=librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>
8> ]
8> hole-filling-filter.cpp
8> disparity-transform.cpp
8> yuy2rgb.cpp
8> threshold.cpp
8> rates-printer.cpp
8> zero-order.cpp
8>E:LibRealsenselibrealsense-2.29.0srcproc
ates-printer.cpp(30): warning C4244: “初始化”: 从“__int64”转换到“double”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcproc
ates-printer.cpp(76): warning C4244: “=”: 从“unsigned __int64”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcproc
ates-printer.cpp(84): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcprocdisparity-transform.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcprocdisparity-transform.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcprocdisparity-transform.cpp(28): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用
8> units-transform.cpp
8> pipeline.cpp
8> config.cpp
8>E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(343): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> profile.cpp
8>E:LibRealsenselibrealsense-2.29.0srcprocunits-transform.cpp(55): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8> aggregator.cpp
8> fw-update-device.cpp
8>E:Visual Studio 2015installVCincludeutility(172): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(376): note: 参见对正在编译的函数 模板 实例化“std::pair<int,int>::pair<float&,float&,void,0>(_Other1,_Other2) noexcept”的引用
8> with
8> [
8> _Other1=float &,
8> _Other2=float &
8> ]
8> E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(376): note: 参见对正在编译的函数 模板 实例化“std::pair<int,int>::pair<float&,float&,void,0>(_Other1,_Other2) noexcept”的引用
8> with
8> [
8> _Other1=float &,
8> _Other2=float &
8> ]
8>E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(145): warning C4244: “参数”: 从“const float”转换到“int”，可能丢失数据
8> E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(447): note: 参见对正在编译的函数 模板 实例化“bool librealsense::zero_order_invalidation<librealsense::zero_order::process_frame::<lambda_ab025f9d742477f9e511aed9219bf3f9>>(const uint16_t *,const uint8_t *,T,const rs2::vertex *,rs2_intrinsics,const librealsense::zero_order_options &,int,int)”的引用
8> with
8> [
8> T=librealsense::zero_order::process_frame::<lambda_ab025f9d742477f9e511aed9219bf3f9>
8> ]
8>E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(153): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8> with
8> [
8> _Ty=librealsense::ptr_option<float>
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8> with
8> [
8> _Ty=librealsense::ptr_option<float>
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcproczero-order.cpp(216): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::ptr_option<float>> std::make_shared<librealsense::ptr_option<float>,int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8> fw-update-factory.cpp
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> fw-update-unsigned.cpp
8>E:LibRealsenselibrealsense-2.29.0srcfw-updatefw-update-device.cpp(70): warning C4800: “uint16_t”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:LibRealsenselibrealsense-2.29.0srcfw-updatefw-update-device.cpp(135): warning C4267: “初始化”: 从“size_t”转换到“uint16_t”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcfw-updatefw-update-device.cpp(147): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelinepipeline.cpp)
8> win-helpers.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcpipelineprofile.cpp)
8>E:LibRealsenselibrealsense-2.29.0srcwinwin-helpers.cpp(409): warning C4267: “参数”: 从“size_t”转换到“ULONG”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcwinwin-helpers.cpp(506): warning C4267: “参数”: 从“size_t”转换到“DWORD”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcwinwin-helpers.cpp(544): warning C4267: “参数”: 从“size_t”转换到“DWORD”，可能丢失数据
8> interface-winusb.cpp
8> device-winusb.cpp
8> enumerator-winusb.cpp
8> messenger-winusb.cpp
8> mf-uvc.cpp
8> mf-hid.cpp
8> mf-backend.cpp
8> tm-context.cpp
8>E:LibRealsenselibrealsense-2.29.0srcwinusbenumerator-winusb.cpp(59): warning C4018: “<”: 有符号/无符号不匹配
8>E:LibRealsenselibrealsense-2.29.0srcwinusbenumerator-winusb.cpp(64): warning C4267: “+=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcwinusbmessenger-winusb.cpp(125): warning C4800: “BOOL”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:LibRealsenselibrealsense-2.29.0srcwinusbmessenger-winusb.cpp(127): warning C4800: “BOOL”: 将值强制为布尔值“true”或“false”(性能警告)
8> tm-device.cpp
8> tm-info.cpp
8> algo.cpp
8> archive.cpp
8> backend.cpp
8> context.cpp
8> device.cpp
8>E:Visual Studio 2015installVCincludexutility(2372): warning C4996: 'std::copy::_Unchecked_iterators::_Deprecate': Call to 'std::copy' with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See documentation on how to use Visual C++ 'Checked Iterators' (编译源文件 E:LibRealsenselibrealsense-2.29.0srcackend.cpp)
8> E:Visual Studio 2015installVCincludexutility(2372): note: 参见“std::copy::_Unchecked_iterators::_Deprecate”的声明 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcackend.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcackend.cpp(23): note: 参见对正在编译的函数 模板 实例化“_OutIt std::copy<const uint8_t*,_Ty*>(_InIt,_InIt,_OutIt)”的引用
8> with
8> [
8> _OutIt=uint8_t *,
8> _Ty=uint8_t,
8> _InIt=const uint8_t *
8> ]
8>E:LibRealsenselibrealsense-2.29.0srcarchive.cpp(67): warning C4267: “参数”: 从“size_t”转换到“const int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcarchive.cpp(67): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcarchive.cpp(79): warning C4018: “<”: 有符号/无符号不匹配
8>E:LibRealsenselibrealsense-2.29.0srcarchive.cpp(80): warning C4018: “<”: 有符号/无符号不匹配
8> device_hub.cpp
8>E:LibRealsenselibrealsense-2.29.0srcarchive.cpp(245): warning C4267: “return”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp(147): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> environment.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8>E:Visual Studio 2015installVCincludemutex(651): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:Visual Studio 2015installVCincludemutex(594): note: 参见对正在编译的函数 模板 实例化“bool std::condition_variable::_Wait_until1<_Predicate>(std::unique_lock<std::mutex> &,const xtime *,_Predicate &)”的引用
8> with
8> [
8> _Predicate=librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp)
8> E:LibRealsenselibrealsense-2.29.0src m2 m-device.cpp(1432): note: 参见对正在编译的函数 模板 实例化“bool std::condition_variable::wait_for<__int64,std::ratio<1,1>,librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>>(std::unique_lock<std::mutex> &,const std::chrono::duration<__int64,std::ratio<1,1>> &,_Predicate)”的引用
8> with
8> [
8> _Predicate=librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>
8> ]
8> error-handling.cpp
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> e:librealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> global_timestamp_reader.cpp
8> hw-monitor.cpp
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srccontext.cpp)
8> image.cpp
8> image-avx.cpp
8> log.cpp
8> option.cpp
8> rs.cpp
8> sensor.cpp
8> software-device.cpp
8> source.cpp
8> stream.cpp
8> sync.cpp
8> types.cpp
8>E:LibRealsenselibrealsense-2.29.0srcsensor.cpp(536): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcsensor.cpp(1019): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8>E:LibRealsenselibrealsense-2.29.0srcsoftware-device.cpp(66): warning C4244: “=”: 从“uint64_t”转换到“int”，可能丢失数据
8> frame-validator.cpp
8>E:LibRealsenselibrealsense-2.29.0src
s.cpp(192): warning C4297: “rs2_query_devices_ex”: 假定函数不引发异常，但确实发生了
8> E:LibRealsenselibrealsense-2.29.0src
s.cpp(192): note: 在函数上指定了 __declspec(nothrow)、throw()、noexcept(true)或 noexcept
8>E:LibRealsenselibrealsense-2.29.0src
s.cpp(1656): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8> e:librealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8>E:Visual Studio 2015installVCincludexutility(2372): warning C4996: 'std::copy::_Unchecked_iterators::_Deprecate': Call to 'std::copy' with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS. See documentation on how to use Visual C++ 'Checked Iterators' (编译源文件 E:LibRealsenselibrealsense-2.29.0src ypes.cpp)
8> E:Visual Studio 2015installVCincludexutility(2372): note: 参见“std::copy::_Unchecked_iterators::_Deprecate”的声明 (编译源文件 E:LibRealsenselibrealsense-2.29.0src ypes.cpp)
8> E:LibRealsenselibrealsense-2.29.0src ypes.cpp(623): note: 参见对正在编译的函数 模板 实例化“_OutIt std::copy<const uint8_t*,uint8_t*>(_InIt,_InIt,_OutIt)”的引用
8> with
8> [
8> _OutIt=uint8_t *,
8> _InIt=const uint8_t *
8> ]
8> easylogging++.cc
8>e:librealsenselibrealsense-2.29.0srcoption.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0srcframe-validator.cpp)
8> e:librealsenselibrealsense-2.29.0srcoption.h(120): note: 编译类 模板 成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcframe-validator.cpp)
8> e:librealsenselibrealsense-2.29.0srcframe-validator.h(14): note: 参见对正在编译的类 模板 实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcframe-validator.cpp)
8>E:Visual Studio 2015installVCincludememory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8> E:Visual Studio 2015installVCincludememory(971): note: 参见对正在编译的函数 模板 实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8> e:librealsenselibrealsense-2.29.0srcl500/l500-depth.h(105): note: 参见对正在编译的函数 模板 实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:LibRealsenselibrealsense-2.29.0src
s.cpp)
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> verify.c
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> sqlite3.c
8> 正在创建库 E:/LibRealsense/build/Debug/realsense2d.lib 和对象 E:/LibRealsense/build/Debug/realsense2d.exp
8> realsense2.vcxproj -> E:LibRealsenseuildDebug
ealsense2d.dll
8> realsense2.vcxproj -> E:/LibRealsense/build/Debug/realsense2d.pdb (Full PDB)
9>------ 已启动全部重新生成: 项目: realsense2-gl, 配置: Debug x64 ------
10>------ 已启动全部重新生成: 项目: rs-record-playback, 配置: Debug x64 ------
11>------ 已启动全部重新生成: 项目: rs-save-to-disk, 配置: Debug x64 ------
12>------ 已启动全部重新生成: 项目: rs-software-device, 配置: Debug x64 ------
13>------ 已启动全部重新生成: 项目: rs-terminal, 配置: Debug x64 ------
14>------ 已启动全部重新生成: 项目: rs-tracking-and-depth, 配置: Debug x64 ------
15>------ 已启动全部重新生成: 项目: rs-depth, 配置: Debug x64 ------
16>------ 已启动全部重新生成: 项目: rs-trajectory, 配置: Debug x64 ------
9> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/src/gl/CMakeLists.txt
9> CMake does not need to re-run because E:/LibRealsense/build/src/gl/CMakeFiles/generate.stamp is up-to-date.
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> synthetic-stream-gl.cpp
9> yuy2rgb-gl.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> pointcloud-gl.cpp
9> rs-gl.cpp
9> opengl3.cpp
9> pc-shader.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> camera-shader.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> upload.cpp
16> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/trajectory/CMakeLists.txt
13> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/terminal/CMakeLists.txt
10> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/record-playback/CMakeLists.txt
16> CMake does not need to re-run because E:/LibRealsense/build/examples/trajectory/CMakeFiles/generate.stamp is up-to-date.
12> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/software-device/CMakeLists.txt
13> CMake does not need to re-run because E:/LibRealsense/build/tools/terminal/CMakeFiles/generate.stamp is up-to-date.
10> CMake does not need to re-run because E:/LibRealsense/build/examples/record-playback/CMakeFiles/generate.stamp is up-to-date.
12> CMake does not need to re-run because E:/LibRealsense/build/examples/software-device/CMakeFiles/generate.stamp is up-to-date.
16>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
12>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
11> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/save-to-disk/CMakeLists.txt
16> rs-trajectory.cpp
12> rs-software-device.cpp
11> CMake does not need to re-run because E:/LibRealsense/build/examples/save-to-disk/CMakeFiles/generate.stamp is up-to-date.
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13> rs-terminal.cpp
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13> auto-complete.cpp
10> rs-record-playback.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui_draw.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui_impl_glfw.cpp
11>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
11> rs-save-to-disk.cpp
10>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
12>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
12>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
12>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
12>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(137): warning C4305: “参数”: 从“double”到“GLfloat”截断
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(216): warning C4305: “初始化”: 从“double”到“float”截断
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(237): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(269): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(269): warning C4244: “参数”: 从“float”转换到“GLint”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(271): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(271): warning C4244: “参数”: 从“float”转换到“GLint”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(292): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(338): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(338): warning C4305: “参数”: 从“double”到“GLfloat”截断
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(415): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(416): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(417): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(418): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(422): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(423): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(425): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(426): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(428): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:LibRealsenselibrealsense-2.29.0examples rajectory
s-trajectory.cpp(429): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
16> lz4.c
14> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/tracking-and-depth/CMakeLists.txt
15> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/depth/CMakeLists.txt
15> CMake does not need to re-run because E:/LibRealsense/build/examples/C/depth/CMakeFiles/generate.stamp is up-to-date.
14> CMake does not need to re-run because E:/LibRealsense/build/examples/tracking-and-depth/CMakeFiles/generate.stamp is up-to-date.
15>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
15> rs-depth.c
14>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
14> rs-tracking-and-depth.cpp
10>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examples
ecord-playback
s-record-playback.cpp)
10>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examples
ecord-playback
s-record-playback.cpp)
15>E:LibRealsenselibrealsense-2.29.0examplesCdepth
s-depth.c(239): warning C4090: “函数”: 不同的“const”限定符
10>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examples
ecord-playback
s-record-playback.cpp)
10>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examples
ecord-playback
s-record-playback.cpp)
14>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
14>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
14>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
14>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
13>E:LibRealsenselibrealsense-2.29.0 ools erminal
s-terminal.cpp(192): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
13>E:LibRealsenselibrealsense-2.29.0 ools erminal
s-terminal.cpp(193): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
15> rs-depth.vcxproj -> E:LibRealsenseuildDebug
s-depth.exe
15> rs-depth.vcxproj -> E:/LibRealsense/build/Debug/rs-depth.pdb (Full PDB)
17>------ 已启动全部重新生成: 项目: rs-sensor-control, 配置: Debug x64 ------
17> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/sensor-control/CMakeLists.txt
17> CMake does not need to re-run because E:/LibRealsense/build/examples/sensor-control/CMakeFiles/generate.stamp is up-to-date.
17>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
17> rs-sensor-control.cpp
11> rs-save-to-disk.vcxproj -> E:LibRealsenseuildDebug
s-save-to-disk.exe
11> rs-save-to-disk.vcxproj -> E:/LibRealsense/build/Debug/rs-save-to-disk.pdb (Full PDB)
18>------ 已启动全部重新生成: 项目: rs-align, 配置: Debug x64 ------
18> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/align/CMakeLists.txt
18> CMake does not need to re-run because E:/LibRealsense/build/examples/align/CMakeFiles/generate.stamp is up-to-date.
17>e:librealsenselibrealsense-2.29.0examplessensor-control../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
17>e:librealsenselibrealsense-2.29.0examplessensor-control../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
17>e:librealsenselibrealsense-2.29.0examplessensor-control../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
17>e:librealsenselibrealsense-2.29.0examplessensor-control../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18> rs-align.cpp
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18> imgui.cpp
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18> imgui_draw.cpp
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18> imgui_impl_glfw.cpp
12> rs-software-device.vcxproj -> E:LibRealsenseuildDebug
s-software-device.exe
12> rs-software-device.vcxproj -> E:/LibRealsense/build/Debug/rs-software-device.pdb (Full PDB)
16> rs-trajectory.vcxproj -> E:LibRealsenseuildDebug
s-trajectory.exe
16> rs-trajectory.vcxproj -> E:/LibRealsense/build/Debug/rs-trajectory.pdb (Full PDB)
19>------ 已启动全部重新生成: 项目: rs-align-advanced, 配置: Debug x64 ------
20>------ 已启动全部重新生成: 项目: rs-ar-basic, 配置: Debug x64 ------
9> colorizer-gl.cpp
19> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/align-advanced/CMakeLists.txt
20> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/ar-basic/CMakeLists.txt
19> CMake does not need to re-run because E:/LibRealsense/build/examples/align-advanced/CMakeFiles/generate.stamp is up-to-date.
20> CMake does not need to re-run because E:/LibRealsense/build/examples/ar-basic/CMakeFiles/generate.stamp is up-to-date.
20>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
20> rs-ar-basic.cpp
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19> rs-align-advanced.cpp
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19> imgui.cpp
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19> imgui_draw.cpp
19> imgui_impl_glfw.cpp
17>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_frame.hpp(95): warning C4800: “const rs2_stream_profile *”: 将值强制为布尔值“true”或“false”(性能警告)
17> e:librealsenselibrealsense-2.29.0examplessensor-controlapi_how_to.h(419): note: 参见对正在编译的函数 模板 实例化“bool rs2::stream_profile::is<rs2::video_stream_profile>(void) const”的引用
18>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
20>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesar-basic
s-ar-basic.cpp(86): warning C4305: “初始化”: 从“double”到“float”截断
20>E:LibRealsenselibrealsense-2.29.0examplesar-basic
s-ar-basic.cpp(144): warning C4305: “参数”: 从“double”到“float”截断
20>E:LibRealsenselibrealsense-2.29.0examplesar-basic
s-ar-basic.cpp(158): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesar-basic
s-ar-basic.cpp(162): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
20>E:LibRealsenselibrealsense-2.29.0examplesar-basic
s-ar-basic.cpp(294): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据
19>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglpc-shader.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglpointcloud-gl.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglyuy2rgb-gl.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglcamera-shader.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglsynthetic-stream-gl.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglupload.cpp)
18>e:librealsenselibrealsense-2.29.0examplesalign../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign
s-align.cpp)
18>e:librealsenselibrealsense-2.29.0examplesalign../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign
s-align.cpp)
18>e:librealsenselibrealsense-2.29.0examplesalign../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign
s-align.cpp)
18>e:librealsenselibrealsense-2.29.0examplesalign../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign
s-align.cpp)
19>e:librealsenselibrealsense-2.29.0examplesalign-advanced../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign-advanced
s-align-advanced.cpp)
19>e:librealsenselibrealsense-2.29.0examplesalign-advanced../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign-advanced
s-align-advanced.cpp)
19>e:librealsenselibrealsense-2.29.0examplesalign-advanced../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign-advanced
s-align-advanced.cpp)
19>e:librealsenselibrealsense-2.29.0examplesalign-advanced../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplesalign-advanced
s-align-advanced.cpp)
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcgl
s-gl.cpp)
9>E:LibRealsenselibrealsense-2.29.0srcglyuy2rgb-gl.cpp(12): warning C4005: “NOMINMAX”: 宏重定义
9> E:LibRealsenselibrealsense-2.29.0srcglyuy2rgb-gl.cpp(12): note: 命令行参数: 参见前面的“NOMINMAX”定义
9>E:LibRealsenselibrealsense-2.29.0srcglsynthetic-stream-gl.cpp(11): warning C4005: “NOMINMAX”: 宏重定义
9> E:LibRealsenselibrealsense-2.29.0srcglsynthetic-stream-gl.cpp(11): note: 命令行参数: 参见前面的“NOMINMAX”定义
14> rs-tracking-and-depth.vcxproj -> E:LibRealsenseuildDebug
s-tracking-and-depth.exe
14> rs-tracking-and-depth.vcxproj -> E:/LibRealsense/build/Debug/rs-tracking-and-depth.pdb (Full PDB)
21>------ 已启动全部重新生成: 项目: rs-callback, 配置: Debug x64 ------
21> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/callback/CMakeLists.txt
9>E:LibRealsenselibrealsense-2.29.0srcglupload.cpp(15): warning C4005: “NOMINMAX”: 宏重定义
9> E:LibRealsenselibrealsense-2.29.0srcglupload.cpp(15): note: 命令行参数: 参见前面的“NOMINMAX”定义
21> CMake does not need to re-run because E:/LibRealsense/build/examples/callback/CMakeFiles/generate.stamp is up-to-date.
21>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
21> rs-callback.cpp
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp)
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(14): warning C4005: “NOMINMAX”: 宏重定义
9> E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(14): note: 命令行参数: 参见前面的“NOMINMAX”定义
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(153): warning C4267: “参数”: 从“size_t”转换到“GLsizei”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(184): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(223): warning C4267: “参数”: 从“size_t”转换到“GLsizei”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(314): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(317): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
20> rs-ar-basic.vcxproj -> E:LibRealsenseuildDebug
s-ar-basic.exe
20> rs-ar-basic.vcxproj -> E:/LibRealsense/build/Debug/rs-ar-basic.pdb (Full PDB)
22>------ 已启动全部重新生成: 项目: rs-capture, 配置: Debug x64 ------
22> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/capture/CMakeLists.txt
22> CMake does not need to re-run because E:/LibRealsense/build/examples/capture/CMakeFiles/generate.stamp is up-to-date.
22>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
22> rs-capture.cpp
13> rs-terminal.vcxproj -> E:LibRealsenseuildDebug
s-terminal.exe
13> rs-terminal.vcxproj -> E:/LibRealsense/build/Debug/rs-terminal.pdb (Full PDB)
23>------ 已启动全部重新生成: 项目: rs-color, 配置: Debug x64 ------
23> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/color/CMakeLists.txt
23> CMake does not need to re-run because E:/LibRealsense/build/examples/C/color/CMakeFiles/generate.stamp is up-to-date.
10> rs-record-playback.vcxproj -> E:LibRealsenseuildDebug
s-record-playback.exe
10> rs-record-playback.vcxproj -> E:/LibRealsense/build/Debug/rs-record-playback.pdb (Full PDB)
24>------ 已启动全部重新生成: 项目: rs-convert, 配置: Debug x64 ------
23>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
23> rs-color.c
24> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/convert/CMakeLists.txt
24> CMake does not need to re-run because E:/LibRealsense/build/tools/convert/CMakeFiles/generate.stamp is up-to-date.
22>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
22>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
22>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
22>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
24>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
24> rs-convert.cpp
24>e:librealsenselibrealsense-2.29.0 oolsconvertconverters/converter-bin.hpp(47): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
24>e:librealsenselibrealsense-2.29.0 oolsconvertconverters/converter-bin.hpp(48): warning C4244: “初始化”: 从“float”转换到“uint32_t”，可能丢失数据
17> rs-sensor-control.vcxproj -> E:LibRealsenseuildDebug
s-sensor-control.exe
17> rs-sensor-control.vcxproj -> E:/LibRealsense/build/Debug/rs-sensor-control.pdb (Full PDB)
25>------ 已启动全部重新生成: 项目: rs-pose-and-image, 配置: Debug x64 ------
25> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose-and-image/CMakeLists.txt
25> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-and-image/CMakeFiles/generate.stamp is up-to-date.
25>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
25> rs-pose-and-image.cpp
23> rs-color.vcxproj -> E:LibRealsenseuildDebug
s-color.exe
23> rs-color.vcxproj -> E:/LibRealsense/build/Debug/rs-color.pdb (Full PDB)
26>------ 已启动全部重新生成: 项目: rs-distance, 配置: Debug x64 ------
26> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/distance/CMakeLists.txt
26> CMake does not need to re-run because E:/LibRealsense/build/examples/C/distance/CMakeFiles/generate.stamp is up-to-date.
9>E:LibRealsenselibrealsense-2.29.0srcproc/colorizer.h(110): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp)
9> E:LibRealsenselibrealsense-2.29.0srcglcolorizer-gl.cpp(273): note: 参见对正在编译的函数 模板 实例化“void librealsense::colorizer::update_histogram<float>(int *,const T *,int,int)”的引用
9> with
9> [
9> T=float
9> ]
21> rs-callback.vcxproj -> E:LibRealsenseuildDebug
s-callback.exe
21> rs-callback.vcxproj -> E:/LibRealsense/build/Debug/rs-callback.pdb (Full PDB)
27>------ 已启动全部重新生成: 项目: rs-enumerate-devices, 配置: Debug x64 ------
26>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
26> rs-distance.c
27> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/enumerate-devices/CMakeLists.txt
27> CMake does not need to re-run because E:/LibRealsense/build/tools/enumerate-devices/CMakeFiles/generate.stamp is up-to-date.
27>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
27> rs-enumerate-devices.cpp
9> align-gl.cpp
18> rs-align.vcxproj -> E:LibRealsenseuildDebug
s-align.exe
18> rs-align.vcxproj -> E:/LibRealsense/build/Debug/rs-align.pdb (Full PDB)
28>------ 已启动全部重新生成: 项目: rs-fw-logger, 配置: Debug x64 ------
28> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/fw-logger/CMakeLists.txt
28> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-logger/CMakeFiles/generate.stamp is up-to-date.
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> rs-fw-logger.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-log-data.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-formating-options.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-parser.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-xml-helper.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> string-formatter.cpp
22> rs-capture.vcxproj -> E:LibRealsenseuildDebug
s-capture.exe
22> rs-capture.vcxproj -> E:/LibRealsense/build/Debug/rs-capture.pdb (Full PDB)
29>------ 已启动全部重新生成: 项目: rs-fw-update, 配置: Debug x64 ------
29> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/fw-update/CMakeLists.txt
29> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-update/CMakeFiles/generate.stamp is up-to-date.
29>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
29> rs-fw-update.cpp
9> easylogging++.cc
19> rs-align-advanced.vcxproj -> E:LibRealsenseuildDebug
s-align-advanced.exe
19> rs-align-advanced.vcxproj -> E:/LibRealsense/build/Debug/rs-align-advanced.pdb (Full PDB)
30>------ 已启动全部重新生成: 项目: rs-hello-realsense, 配置: Debug x64 ------
30> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/hello-realsense/CMakeLists.txt
26> rs-distance.vcxproj -> E:LibRealsenseuildDebug
s-distance.exe
26> rs-distance.vcxproj -> E:/LibRealsense/build/Debug/rs-distance.pdb (Full PDB)
30> CMake does not need to re-run because E:/LibRealsense/build/examples/hello-realsense/CMakeFiles/generate.stamp is up-to-date.
31>------ 已启动全部重新生成: 项目: rs-measure, 配置: Debug x64 ------
30>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
30> rs-hello-realsense.cpp
31> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/measure/CMakeLists.txt
31> CMake does not need to re-run because E:/LibRealsense/build/examples/measure/CMakeFiles/generate.stamp is up-to-date.
31>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
31> rs-measure.cpp
29>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(280): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
29> E:LibRealsenselibrealsense-2.29.0 oolsfw-update
s-fw-update.cpp(82): note: 参见对正在编译的函数 模板 实例化“void rs2::update_device::update<update::<lambda_28ad25d67457eb86bca983cf623f6069>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T) const”的引用
29> with
29> [
29> _Ty=uint8_t,
29> T=update::<lambda_28ad25d67457eb86bca983cf623f6069>
29> ]
29>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(245): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
29> E:LibRealsenselibrealsense-2.29.0 oolsfw-update
s-fw-update.cpp(273): note: 参见对正在编译的函数 模板 实例化“void rs2::updatable::update_unsigned<main::<lambda_db83df80ef1513ecf27249af14bcbc52>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T,int) const”的引用
29> with
29> [
29> _Ty=uint8_t,
29> T=main::<lambda_db83df80ef1513ecf27249af14bcbc52>
29> ]
30>E:LibRealsenselibrealsense-2.29.0exampleshello-realsense
s-hello-realsense.cpp(26): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
30>E:LibRealsenselibrealsense-2.29.0exampleshello-realsense
s-hello-realsense.cpp(27): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
30>E:LibRealsenselibrealsense-2.29.0exampleshello-realsense
s-hello-realsense.cpp(30): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(36): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(37): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(59): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(268): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(269): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(270): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(271): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(278): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(279): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(297): warning C4244: “参数”: 从“int”转换到“GLfloat”，可能丢失数据
31>E:LibRealsenselibrealsense-2.29.0examplesmeasure
s-measure.cpp(357): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
24> rs-convert.vcxproj -> E:LibRealsenseuildDebug
s-convert.exe
24> rs-convert.vcxproj -> E:/LibRealsense/build/Debug/rs-convert.pdb (Full PDB)
32>------ 已启动全部重新生成: 项目: rs-motion, 配置: Debug x64 ------
32> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/motion/CMakeLists.txt
32> CMake does not need to re-run because E:/LibRealsense/build/examples/motion/CMakeFiles/generate.stamp is up-to-date.
32>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
32> rs-motion.cpp
32>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
25> rs-pose-and-image.vcxproj -> E:LibRealsenseuildDebug
s-pose-and-image.exe
25> rs-pose-and-image.vcxproj -> E:/LibRealsense/build/Debug/rs-pose-and-image.pdb (Full PDB)
33>------ 已启动全部重新生成: 项目: rs-multicam, 配置: Debug x64 ------
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(84): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(85): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(86): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(91): warning C4305: “参数”: 从“double”到“GLfloat”截断
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(119): warning C4305: “初始化”: 从“double”到“float”截断
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(145): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
32>E:LibRealsenselibrealsense-2.29.0examplesmotion
s-motion.cpp(168): warning C4305: “=”: 从“const double”到“float”截断
33> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/multicam/CMakeLists.txt
33> CMake does not need to re-run because E:/LibRealsense/build/examples/multicam/CMakeFiles/generate.stamp is up-to-date.
30> rs-hello-realsense.vcxproj -> E:LibRealsenseuildDebug
s-hello-realsense.exe
30> rs-hello-realsense.vcxproj -> E:/LibRealsense/build/Debug/rs-hello-realsense.pdb (Full PDB)
27> rs-enumerate-devices.vcxproj -> E:LibRealsenseuildDebug
s-enumerate-devices.exe
27> rs-enumerate-devices.vcxproj -> E:/LibRealsense/build/Debug/rs-enumerate-devices.pdb (Full PDB)
34>------ 已启动全部重新生成: 项目: rs-pointcloud, 配置: Debug x64 ------
35>------ 已启动全部重新生成: 项目: rs-pose, 配置: Debug x64 ------
33>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
32>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
33> rs-multicam.cpp
32> lz4.c
35> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose/CMakeLists.txt
34> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pointcloud/CMakeLists.txt
35> CMake does not need to re-run because E:/LibRealsense/build/examples/pose/CMakeFiles/generate.stamp is up-to-date.
34> CMake does not need to re-run because E:/LibRealsense/build/examples/pointcloud/CMakeFiles/generate.stamp is up-to-date.
33>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
33>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
33>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
33>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
35>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
34>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
35> rs-pose.cpp
34> rs-pointcloud.cpp
9>E:LibRealsenselibrealsense-2.29.0common iny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp)
34>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
34>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
34>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
34>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
31> rs-measure.vcxproj -> E:LibRealsenseuildDebug
s-measure.exe
31> rs-measure.vcxproj -> E:/LibRealsense/build/Debug/rs-measure.pdb (Full PDB)
36>------ 已启动全部重新生成: 项目: rs-pose-predict, 配置: Debug x64 ------
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(12): warning C4005: “NOMINMAX”: 宏重定义
9> E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(12): note: 命令行参数: 参见前面的“NOMINMAX”定义
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(110): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(111): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(112): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(113): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(120): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(121): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(122): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(130): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(131): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:LibRealsenselibrealsense-2.29.0srcglalign-gl.cpp(132): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
36> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose-predict/CMakeLists.txt
36> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-predict/CMakeFiles/generate.stamp is up-to-date.
36>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
36> rs-pose-predict.cpp
36>E:LibRealsenselibrealsense-2.29.0examplespose-predict
s-pose-predict.cpp(66): warning C4244: “初始化”: 从“__int64”转换到“double”，可能丢失数据
29> rs-fw-update.vcxproj -> E:LibRealsenseuildDebug
s-fw-update.exe
29> rs-fw-update.vcxproj -> E:/LibRealsense/build/Debug/rs-fw-update.pdb (Full PDB)
32> rs-motion.vcxproj -> E:LibRealsenseuildDebug
s-motion.exe
32> rs-motion.vcxproj -> E:/LibRealsense/build/Debug/rs-motion.pdb (Full PDB)
37>------ 已启动全部重新生成: 项目: rs-post-processing, 配置: Debug x64 ------
38>------ 已启动全部重新生成: 项目: rs-record, 配置: Debug x64 ------
35> rs-pose.vcxproj -> E:LibRealsenseuildDebug
s-pose.exe
35> rs-pose.vcxproj -> E:/LibRealsense/build/Debug/rs-pose.pdb (Full PDB)
34> rs-pointcloud.vcxproj -> E:LibRealsenseuildDebug
s-pointcloud.exe
34> rs-pointcloud.vcxproj -> E:/LibRealsense/build/Debug/rs-pointcloud.pdb (Full PDB)
38> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/recorder/CMakeLists.txt
37> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/post-processing/CMakeLists.txt
38> CMake does not need to re-run because E:/LibRealsense/build/tools/recorder/CMakeFiles/generate.stamp is up-to-date.
37> CMake does not need to re-run because E:/LibRealsense/build/examples/post-processing/CMakeFiles/generate.stamp is up-to-date.
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> rs-record.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> rs-post-processing.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> imgui.cpp
37> imgui_draw.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> imgui_impl_glfw.cpp
28> rs-fw-logger.vcxproj -> E:LibRealsenseuildDebug
s-fw-logger.exe
28> rs-fw-logger.vcxproj -> E:/LibRealsense/build/Debug/rs-fw-logger.pdb (Full PDB)
37>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
37>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp)
37>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp)
37>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp)
37>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp)
37>E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp(187): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
37>E:LibRealsenselibrealsense-2.29.0examplespost-processing
s-post-processing.cpp(192): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
33> rs-multicam.vcxproj -> E:LibRealsenseuildDebug
s-multicam.exe
33> rs-multicam.vcxproj -> E:/LibRealsense/build/Debug/rs-multicam.pdb (Full PDB)
36> rs-pose-predict.vcxproj -> E:LibRealsenseuildDebug
s-pose-predict.exe
36> rs-pose-predict.vcxproj -> E:/LibRealsense/build/Debug/rs-pose-predict.pdb (Full PDB)
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> glad.c
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> lz4.c
38> rs-record.vcxproj -> E:LibRealsenseuildDebug
s-record.exe
38> rs-record.vcxproj -> E:/LibRealsense/build/Debug/rs-record.pdb (Full PDB)
37> rs-post-processing.vcxproj -> E:LibRealsenseuildDebug
s-post-processing.exe
37> rs-post-processing.vcxproj -> E:/LibRealsense/build/Debug/rs-post-processing.pdb (Full PDB)
9> 正在创建库 E:/LibRealsense/build/src/gl/Debug/realsense2-gld.lib 和对象 E:/LibRealsense/build/src/gl/Debug/realsense2-gld.exp
9> realsense2-gl.vcxproj -> E:LibRealsenseuildDebug
ealsense2-gld.dll
9> realsense2-gl.vcxproj -> E:/LibRealsense/build/Debug/realsense2-gld.pdb (Full PDB)
39>------ 已启动全部重新生成: 项目: rs-rosbag-inspector, 配置: Debug x64 ------
40>------ 已启动全部重新生成: 项目: realsense-viewer, 配置: Debug x64 ------
41>------ 已启动全部重新生成: 项目: rs-benchmark, 配置: Debug x64 ------
42>------ 已启动全部重新生成: 项目: rs-data-collect, 配置: Debug x64 ------
43>------ 已启动全部重新生成: 项目: rs-depth-quality, 配置: Debug x64 ------
44>------ 已启动全部重新生成: 项目: rs-gl, 配置: Debug x64 ------
42> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/data-collect/CMakeLists.txt
41> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/benchmark/CMakeLists.txt
39> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/rosbag-inspector/CMakeLists.txt
40> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/realsense-viewer/CMakeLists.txt
43> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/depth-quality/CMakeLists.txt
41> CMake does not need to re-run because E:/LibRealsense/build/tools/benchmark/CMakeFiles/generate.stamp is up-to-date.
42> CMake does not need to re-run because E:/LibRealsense/build/tools/data-collect/CMakeFiles/generate.stamp is up-to-date.
40> CMake does not need to re-run because E:/LibRealsense/build/tools/realsense-viewer/CMakeFiles/generate.stamp is up-to-date.
39> CMake does not need to re-run because E:/LibRealsense/build/tools/rosbag-inspector/CMakeFiles/generate.stamp is up-to-date.
44> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/gl/CMakeLists.txt
43> CMake does not need to re-run because E:/LibRealsense/build/tools/depth-quality/CMakeFiles/generate.stamp is up-to-date.
44> CMake does not need to re-run because E:/LibRealsense/build/examples/gl/CMakeFiles/generate.stamp is up-to-date.
41>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
41> rs-benchmark.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> rs-data-collect.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
44>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
44> rs-gl.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> model-views.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> notifications.cpp
39> rs-rosbag-inspector.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> os.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> imgui.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> viewer.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> ux-window.cpp
43> model-views.cpp
39> imgui_draw.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> ux-alignment.cpp
43> notifications.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> imgui_impl_glfw.cpp
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> opengl3.cpp
43> viewer.cpp
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> rs-config.cpp
43> ux-window.cpp
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> os.cpp
43> ux-alignment.cpp
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> opengl3.cpp
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> rs-config.cpp
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> os.cpp
44>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
44>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
44>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
44>E:LibRealsenselibrealsense-2.29.0examplesexample.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
39>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
41>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
41> glad.c
43> fw-update-helper.cpp
40> fw-update-helper.cpp
40>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonopengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
40>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
39>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
39>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
39>e:librealsenselibrealsense-2.29.0 hird-party
ealsense-file
osbag
ostimeinclude
os../../../cpp_common/include/ros/platform.h(39): warning C4005: “WIN32_LEAN_AND_MEAN”: 宏重定义 (编译源文件 E:LibRealsenselibrealsense-2.29.0 ools
osbag-inspector
s-rosbag-inspector.cpp)
39> E:LibRealsenselibrealsense-2.29.0 hird-partygladglad/glad.h(37): note: 参见“WIN32_LEAN_AND_MEAN”的前一个定义 (编译源文件 E:LibRealsenselibrealsense-2.29.0 ools
osbag-inspector
s-rosbag-inspector.cpp)
43>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
43>E:LibRealsenselibrealsense-2.29.0commonos.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
44> rs-gl.vcxproj -> E:LibRealsenseuildDebug
s-gl.exe
44> rs-gl.vcxproj -> E:/LibRealsense/build/Debug/rs-gl.pdb (Full PDB)
41> rs-benchmark.vcxproj -> E:LibRealsenseuildDebug
s-benchmark.exe
41> rs-benchmark.vcxproj -> E:/LibRealsense/build/Debug/rs-benchmark.pdb (Full PDB)
40> on-chip-calib.cpp
43> on-chip-calib.cpp
40> realsense-viewer.cpp
43> rs-depth-quality.cpp
42> rs-data-collect.vcxproj -> E:LibRealsenseuildDebug
s-data-collect.exe
42> rs-data-collect.vcxproj -> E:/LibRealsense/build/Debug/rs-data-collect.pdb (Full PDB)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonux-window.cpp)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp)
43>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0common
s-config.cpp)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0common
s-config.cpp)
43>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonux-window.cpp)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonviewer.cpp)
43>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp)
43>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonviewer.cpp)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0common
otifications.cpp)
43>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0common
otifications.cpp)
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(121): warning C4244: “=”: 从“const int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(139): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(168): warning C4305: “参数”: 从“double”到“float”截断
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(169): warning C4305: “参数”: 从“double”到“float”截断
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(196): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(230): warning C4244: “return”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(277): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(278): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(289): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(290): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(294): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(121): warning C4244: “=”: 从“const int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(139): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(168): warning C4305: “参数”: 从“double”到“float”截断
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(169): warning C4305: “参数”: 从“double”到“float”截断
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(196): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(230): warning C4244: “return”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(277): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(278): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(289): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(290): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0common
otifications.cpp(294): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonviewer.cpp(1532): warning C4244: “*=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonviewer.cpp(1546): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
43>E:LibRealsenselibrealsense-2.29.0commonviewer.cpp(1532): warning C4244: “*=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonviewer.cpp(1546): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(197): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(222): warning C4018: “<”: 有符号/无符号不匹配
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(197): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(222): warning C4018: “<”: 有符号/无符号不匹配
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(263): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(275): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(263): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(283): warning C4018: “<”: 有符号/无符号不匹配
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(275): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(283): warning C4018: “<”: 有符号/无符号不匹配
43>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(337): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(337): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp(3475): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp(3575): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp(3475): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.cpp(3575): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp)
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp)
40>e:librealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0 ools
ealsense-viewer
ealsense-viewer.cpp)
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0 oolsdepth-quality
s-depth-quality.cpp)
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(723): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(752): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(765): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(782): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(783): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(800): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(847): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
40>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(848): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
43>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(280): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
43> E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(264): note: 参见对正在编译的函数 模板 实例化“void rs2::update_device::update<rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T) const”的引用
43> with
43> [
43> _Ty=uint8_t,
43> T=rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>
43> ]
40>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(280): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
40> E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(264): note: 参见对正在编译的函数 模板 实例化“void rs2::update_device::update<rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T) const”的引用
40> with
40> [
40> _Ty=uint8_t,
40> T=rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>
40> ]
43>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(245): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
43> E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(276): note: 参见对正在编译的函数 模板 实例化“void rs2::updatable::update_unsigned<rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T,int) const”的引用
43> with
43> [
43> _Ty=uint8_t,
43> T=rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>
43> ]
40>e:librealsenselibrealsense-2.29.0includelibrealsense2hpp
s_device.hpp(245): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp)
40> E:LibRealsenselibrealsense-2.29.0commonfw-update-helper.cpp(276): note: 参见对正在编译的函数 模板 实例化“void rs2::updatable::update_unsigned<rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T,int) const”的引用
40> with
40> [
40> _Ty=uint8_t,
40> T=rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>
40> ]
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(723): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(752): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(765): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(782): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(783): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(800): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(847): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
43>E:LibRealsenselibrealsense-2.29.0commonon-chip-calib.cpp(848): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> glad.c
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> tinyfiledialogs.c
43> depth-quality-model.cpp
40> imgui.cpp
40> imgui_draw.cpp
43> imgui.cpp
40>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
40> imgui_impl_glfw.cpp
43>E:LibRealsenselibrealsense-2.29.0 hird-partyimguiimgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
40> windows-app-bootstrap.cpp
43> imgui_draw.cpp
43> imgui_impl_glfw.cpp
39> rs-rosbag-inspector.vcxproj -> E:LibRealsenseuildDebug
s-rosbag-inspector.exe
39> rs-rosbag-inspector.vcxproj -> E:/LibRealsense/build/Debug/rs-rosbag-inspector.pdb (Full PDB)
43> windows-app-bootstrap.cpp
43>E:LibRealsenselibrealsense-2.29.0commonmodel-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:LibRealsenselibrealsense-2.29.0 oolsdepth-qualitydepth-quality-model.cpp)
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> glad.c
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> tinyfiledialogs.c
40> 正在创建库 E:/LibRealsense/build/tools/realsense-viewer/Debug/realsense-viewer.lib 和对象 E:/LibRealsense/build/tools/realsense-viewer/Debug/realsense-viewer.exp
40> realsense-viewer.vcxproj -> E:LibRealsenseuildDebug
ealsense-viewer.exe
40> realsense-viewer.vcxproj -> E:/LibRealsense/build/Debug/realsense-viewer.pdb (Full PDB)
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> glad.c
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> tinyfiledialogs.c
43> 正在创建库 E:/LibRealsense/build/tools/depth-quality/Debug/rs-depth-quality.lib 和对象 E:/LibRealsense/build/tools/depth-quality/Debug/rs-depth-quality.exp
43> rs-depth-quality.vcxproj -> E:LibRealsenseuildDebug
s-depth-quality.exe
43> rs-depth-quality.vcxproj -> E:/LibRealsense/build/Debug/rs-depth-quality.pdb (Full PDB)
45>------ 已启动全部重新生成: 项目: ALL_BUILD, 配置: Debug x64 ------
========== 全部重新生成: 成功 45 个，失败 0 个，跳过 0 个 ==========
==========================================================================
1>------ 已启动生成: 项目: libusb (ExternalProjectTargetslibusblibusb), 配置: Debug x64 ------
1> Performing update step for 'libusb'
2>------ 已启动生成: 项目: INSTALL, 配置: Debug x64 ------
2> -- Install configuration: "Debug"
2> -- Installing: E:/LibRealsense/install/lib/realsense2d.lib
2> -- Installing: E:/LibRealsense/install/bin/realsense2d.dll
2> -- Installing: E:/LibRealsense/install/include/librealsense2
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_advanced_mode_command.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_config.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_context.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_device.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_frame.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_internal.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_option.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_pipeline.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_processing.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_record_playback.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_sensor.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/h/rs_types.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_context.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_device.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_export.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_frame.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_internal.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_options.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_pipeline.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_processing.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_record_playback.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_sensor.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/hpp/rs_types.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/rs.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/rs.hpp
2> -- Installing: E:/LibRealsense/install/include/librealsense2/rsutil.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/rs_advanced_mode.h
2> -- Installing: E:/LibRealsense/install/include/librealsense2/rs_advanced_mode.hpp
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Targets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Targets-debug.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Config.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2ConfigVersion.cmake
2> -- Installing: E:/LibRealsense/install/lib/pkgconfig/realsense2.pc
2> -- Installing: E:/LibRealsense/install/lib/realsense-filed.lib
2> -- Installing: E:/LibRealsense/install/include/GLFW
2> -- Installing: E:/LibRealsense/install/include/GLFW/glfw3.h
2> -- Installing: E:/LibRealsense/install/include/GLFW/glfw3native.h
2> -- Installing: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Config.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/glfw3/glfw3ConfigVersion.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Targets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Targets-debug.cmake
2> -- Installing: E:/LibRealsense/install/lib/pkgconfig/glfw3.pc
2> -- Installing: E:/LibRealsense/install/lib/glfw3d.lib
2> -- Installing: E:/LibRealsense/install/lib/realsense2-gld.lib
2> -- Installing: E:/LibRealsense/install/bin/realsense2-gld.dll
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glTargets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glTargets-debug.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glConfig.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glConfigVersion.cmake
2> -- Installing: E:/LibRealsense/install/lib/pkgconfig/realsense2-gl.pc
2> -- Installing: E:/LibRealsense/install/bin/rs-hello-realsense.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-software-device.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-capture.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-callback.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-save-to-disk.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-multicam.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pointcloud.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-align.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-align-advanced.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-sensor-control.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-measure.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-depth.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-color.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-distance.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-post-processing.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-record-playback.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-motion.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-gl.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose-predict.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose-and-image.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-trajectory.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-ar-basic.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-tracking-and-depth.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-convert.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-enumerate-devices.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-fw-logger.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-terminal.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-record.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-fw-update.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-data-collect.exe
2> -- Installing: E:/LibRealsense/install/bin/realsense-viewer.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-depth-quality.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-rosbag-inspector.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-benchmark.exe
2> -- Installing: E:/LibRealsense/install/lib/fwd.lib
2> -- Installing: E:/LibRealsense/install/lib/tmd.lib
2> -- Installing: E:/LibRealsense/install/lib/uvc_fwd.lib
========== 生成: 成功 2 个，失败 0 个，最新 44 个，跳过 0 个 ==========