.screenrc
# # This is an example for the global screenrc file. # You may want to install this file as /usr/local/etc/screenrc. # Check config.h for the exact location. # # Flaws of termcap and standard settings are done here. # #startup_message off #defflow on # will force screen to process ^S/^Q deflogin on #autodetach off vbell on vbell_msg " Wuff ---- Wuff!! " # all termcap entries are now duplicated as terminfo entries. # only difference should be the slightly modified syntax, and check for # terminfo entries, that are already corected in the database. # # G0 we have a SEMI-GRAPHICS-CHARACTER-MODE # WS this sequence resizes our window. # cs this sequence changes the scrollregion # hs@ we have no hardware statusline. screen will only believe that # there is a hardware status line if hs,ts,fs,ds are all set. # ts to statusline # fs from statusline # ds delete statusline # al add one line # AL add multiple lines # dl delete one line # DL delete multiple lines # ic insert one char (space) # IC insert multiple chars # nx terminal uses xon/xoff termcap facit|vt100|xterm LP:G0 terminfo facit|vt100|xterm LP:G0 #the vt100 description does not mention "dl". *sigh* termcap vt100 dl=5\E[M terminfo vt100 dl=5\E[M #facit's "al" / "dl" are buggy if the current / last line #contain attributes... termcap facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%d;%dr:ic@ terminfo facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%p1%d;%p2%dr:ic@ #make sun termcap/info better termcap sun 'up=^K:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:IC=\E[%d@:WS=1000\E[8;%d;%dt' terminfo sun 'up=^K:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC:IC=\E[%p1%d@:WS=\E[8;%p1%d;%p2%dt$<1000>' #xterm understands both im/ic and doesn't have a status line. #Note: Do not specify im and ic in the real termcap/info file as #some programs (e.g. vi) will (no,no, may (jw)) not work anymore. termcap xterm|fptwist hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l terminfo xterm|fptwist hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l # Long time I had this in my private screenrc file. But many people # seem to want it (jw): # we do not want the width to change to 80 characters on startup: # on suns, /etc/termcap has :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l: termcap xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l' terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l' # # Do not use xterms alternate window buffer. # This one would not add lines to the scrollback buffer. #termcap xterm|xterms|xs ti=\E7\E[?47l #terminfo xterm|xterms|xs ti=\E7\E[?47l #make hp700 termcap/info better termcap hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@' terminfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@' #wyse-75-42 must have defflow control (xo = "terminal uses xon/xoff") #(nowadays: nx = padding doesn't work, have to use xon/off) #essential to have it here, as this is a slow terminal. termcap wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h terminfo wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h #remove some stupid / dangerous key bindings bind ^x bind x bind ^k #bind L bind ^\ #make them better bind \\ quit bind K kill bind I login on bind O login off bind } history bind X lockscreen # # Example of a user's .screenrc file # # This is how one can set a reattach password: # password ODSJQf.4IJN7E # "1234" # no annoying audible bell, please vbell on # detach on hangup autodetach on # don't display the copyright page startup_message off # emulate .logout message pow_detach_msg "Screen session of $LOGNAME $:cr:$:nl:ended." # advertise hardstatus support to $TERMCAP # termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\' # make the shell in every window a login shell #shell -$SHELL # autoaka testing # shellaka '> |tcsh' # shellaka '$ |sh' # set every new windows hardstatus line to somenthing descriptive # defhstatus "screen: ^En (^Et)" defscrollback 1000 # don't kill window after the process died # zombie "^[" # enable support for the "alternate screen" capability in all windows # altscreen on ################ # # xterm tweaks # #xterm understands both im/ic and doesn't have a status line. #Note: Do not specify im and ic in the real termcap/info file as #some programs (e.g. vi) will not work anymore. termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l #80/132 column switching must be enabled for ^AW to work #change init sequence to not switch width termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l # Make the output buffer large for (fast) xterms. #termcapinfo xterm* OL=10000 termcapinfo xterm* OL=100 # tell screen that xterm can switch to dark background and has function # keys. termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l' termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~' termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~' # special xterm hardstatus: use the window title. termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007' #terminfo xterm 'vb=\E[?5h$<200/>\E[?5l' termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l' # emulate part of the 'K' charset termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337' # xterm-52 tweaks: # - uses background color for delete operations termcapinfo xterm* be ################ # # wyse terminals # #wyse-75-42 must have flow control (xo = "terminal uses xon/xoff") #essential to have it here, as this is a slow terminal. termcapinfo wy75-42 xo:hs@ # New termcap sequences for cursor application mode. termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J ################ # # other terminals # # make hp700 termcap/info better termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@' # Extend the vt100 desciption by some sequences. termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC termcapinfo linux C8 # old rxvt versions also need this # termcapinfo rxvt C8 ################ # # keybindings # #remove some stupid / dangerous key bindings bind k bind ^k bind . bind ^\ bind \\ bind ^h bind h #make them better bind 'K' kill bind 'I' login on bind 'O' login off bind '}' history # Yet another hack: # Prepend/append register [/] to the paste if ^a^] is pressed. # This lets me have autoindent mode in vi. #register [ "\033:se noai\015a" #register ] "\033:se ai\015a" #bind ^] paste [.] ################ # # default windows # # screen -t local 0 # screen -t mail 1 mutt # screen -t 40 2 rlogin server # caption always "%3n %t%? @%u%?%? [%h]%?%=%c" ## alternative caption, gives window list, LOGNAME and current date: # caption always "%{wk}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw %=%{mk}@%H %{yk}%D %{ck}%M%{wk} %{ck}%d %{gk}%c" # hardstatus alwaysignore # hardstatus alwayslastline "%Lw" # Red Hat's normal status line hardstatus string "[screen %n%?: %t%?] %h" # bind = resize = # bind + resize +1 # bind - resize -1 # bind _ resize max # # defnonblock 1 # blankerprg rain -d 100 # idle 30 blanker # Customize screenrc # kill splash screen startup_message off # replace C-a with C-t # escape ^Tt # show original screen when exit from emacs/vi altscreen on # disable flash screen bell vbell off # An alternative hardstatus to display a bar at the bottom listing the # windownames and highlighting the current windowname in blue. (This is only # enabled if there is no hardstatus setting for your terminal) # hardstatus on hardstatus alwayslastline hardstatus string "%{.kw}%-w%{.BW}%n %t%{-}%+w %=%{..G} @%H %{..Y} %Y-%m-%d %c" # show caption at bottom of screen # caption always "%{= kw}%-w%{= BW}%n %t%{-}%+w %-= @%H - %Y-%m-%d %c" # scroll with shift-pgup/pgdn termcapinfo xterm|xterms|xs|rxvt ti@:te@
.vimrc
"""""""""""""""""""""""""""""""""""""" " 编辑器设置 """""""""""""""""""""""""""""""""""""" "开启语法高亮 syntax enable syntax on let $VIM = "/home/paul/vim/" "配色 colors desert "设置高亮搜索 set hlsearch "设置菜单语言为英文 set langmenu=en_US set encoding=utf-8 set fileencodings=utf-8,gb2312,gb18030,gbk,ucs-bom,cp936,latin1 set termencoding=utf-8 source $VIMRUNTIME/delmenu.vim source $VIMRUNTIME/menu.vim "so supertab.vim " 去掉输入错误的提示声音 set noeb " 在处理未保存或只读文件的时候，弹出确认 set confirm " 不要用空格代替制表符 "set noexpandtab " 用空格代替制表符 set et "显示行号 set number "Tab 宽度 set ts=4 "自动缩进 set sw=4 "禁止生成临时文件 set nobackup set noswapfile "搜索忽略大小写 set ignorecase " 总是显示状态行 " set laststatus=2 "C/C++ 风格的自动缩进 set cin "设定 C/C++ 风格自动缩进的选项 set cino=:0g0t0(sus "打开普通文件类型的自动缩进 set ai "在编辑过程中，在右下角显示光标位置的状态行 set ruler "显示匹配括号 set showmatch "在insert模式下能用删除键进行删除 set backspace=indent,eol,start "代码折叠, 命令 za set foldmethod=syntax set foldlevel=100 "启动vim时不要自动折叠代码 "设置字体 set guifont=courier\ 10 "自动换行 set autoindent "设置编码 set encoding=utf-8 set fileencoding=utf-8 set termencoding=utf-8 set langmenu=utf-8 set enc=utf-8 set fenc=utf-8 set fencs=utf-8 "隐藏菜单栏 set guioptions-=m set guioptions-=T """""""""""""""""""""""""""""""""""""" " 快捷键设置 """""""""""""""""""""""""""""""""""""" "当前目录生成tags语法文件，用于自动完成，函数提示：code_complete.vim OmniCppComplete.vim ... "map <F5> :!ctags -R --c-kinds=+p --fields=+S . <CR> map <F1> :!ctags -R --c-kinds=+p --c++-kinds=+p --fields=+iaS --extra=+q . <CR> "函数和变量列表 map <F6> :TlistToggle<CR> "文件树状列表 map <F8> :NERDTreeToggle<CR> "映射复制、粘贴、剪贴ctrl+c ctrl+v ctrl+x "map <C-V> "+pa<Esc> "map! <C-V> <Esc>"+pa "map <C-C> "+y "map <C-X> "+x " 映射全选 ctrl+a map <C-A> ggVG map! <C-A> <Esc>ggVG "下面6个映射用于在不退出输入模式的情况下移动光标 "具体方法就是同时按下ctrl和光标移动键(h or j or k or l) "crtl-b，ctrl-w等同于normal模式下的b和w（前移一个单词和后移一个单词） "注意，ctrl-h在输入模式下默认等同于backspace键（这和在shell下是一样的） imap <C-h> <C-o>h imap <C-j> <C-o>j imap <C-k> <C-o>k imap <C-l> <C-o>l imap <C-e> <C-o>e imap <C-b> <C-o>b imap <C-w> <C-o>w imap <C-x> <C-o>x " 多行缩进 map <Tab> > map <S-Tab> < "全屏 "map <F11> <Esc>:call libcallnr("gvimfullscreen.dll", "ToggleFullScreen", 0)<CR> "F1 后退 "F2 前进 "noremap <F1> <C-o> "noremap <F2> <Tab> "F7 编译 map <unique> <F7> :call Compile()<CR> function! Compile() copen<CR> <C-W>10_ exec "w" exec "!g++ -g % -o %<" endfunction inoremap <F10> :call Debug()<CR> function! Debug() copen<CR> <C-W>10_ exec "w" exec "!gdb %<" endfunction "CTRL-s 保存（保持当前模式不变） "CTRL-o 打开文件对话框 noremap <C-s> :w<CR> noremap! <C-s> <ESC><ESC>:w<CR>a noremap <C-o> :browse tabnew<CR>:cd %:p:h<CR> "Tab 跳至下一窗口 "SHIFT-Tab 跳至上一窗口 noremap <Tab> <C-W>w:cd %:p:h<CR>:<CR> noremap <S-Tab> <C-W>W:cd %:p:h<CR>:<CR> """""""""""""""""""""""""""""""""""""" " 插件设置 """""""""""""""""""""""""""""""""""""" "开启OmniCppComplete.vim "set nocp "filetype plugin on "设置当用户预先声明namespace时也能自动补全代码（如使用using std::string） "let OmniCpp_DefaultNamespaces = ["std"] "set completeopt=longest,menu "2Html插件，启用XHtml css "let html_number_lines=1 "let html_use_css=1 "let use_xhtml=1 "fencview.vim 插件设置 "let g:fencview_autodetect = 1 "打开文件时自动识别编码 "let g:fencview_checklines = 10 "检查前后10行来判断编码 "autocomplpop.vim 插件设置 "let g:AutoComplPop_IgnoreCaseOption=1 set ignorecase set mouse-=a " vimgdb setting "let g:vimgdb_debug_file = "" "run macros/gdb_mappings.vim """"""""""""""""""""""""""""""""""""""""""" ""python编程相关 if has("autocmd") filetype plugin indent on " Python 文件的一般设置，比如不要 tab 等 autocmd FileType python set foldmethod=indent autocmd FileType python set cinwords=if,elif,else,for,while,try,except,finally,def,class endif " doxgen let g:doxygenToolkit_authorName="charis.yangc@alibaba-inc.com" let g:doxygenToolkit_briefTag_funcName="yes" "for snippetEmu let g:snip_set_textmate_cp=1 "set cursorline " EnhanceCommentify "map <F2> <Esc><Esc>:call EnhancedCommentify('yes','comment')<CR> "map <F2> <Esc><Esc>:call EnhancedCommentify('yes','decomment')<CR> let g:EnhCommentifyFirstLineMode='yes' let g:EnhCommentifyRespectIndent='yes' let g:EnhCommentifyUseBlockIndent='yes' let g:EnhCommentifyAlignRight = 'yes' let g:EnhCommentifyPretty = 'yes' let g:EnhCommentifyBindInNormal = 'no' let g:EnhCommentifyBindInVisual = 'no' let g:EnhCommentifyBindInInsert = 'no' " NOTE: VisualComment,Comment,DeComment are plugin mapping(start with <Plug>), " so can't use remap here vmap <unique> <F2> <Plug>VisualComment nmap <unique> <F2> <Plug>Comment imap <unique> <F2> <ESC><Plug>Comment vmap <unique> <F3> <Plug>VisualDeComment nmap <unique> <F3> <Plug>DeComment imap <unique> <F3> <ESC><Plug>DeComment map <C-b> <esc>:BufExplorer<CR> " gz in command mode closes the current buffer map gz :bdelete<cr> " g[bB] in command mode switch to the next/prev. buffer map gb :bnext<cr> map gB :bprev<cr> " json highlight nmap <C-\>s :cs find s <C-R>=expand("<cword>")<CR><CR> nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR> nmap <C-\>c :cs find c <C-R>=expand("<cword>")<CR><CR> nmap <C-\>t :cs find t <C-R>=expand("<cword>")<CR><CR> nmap <C-\>e :cs find e <C-R>=expand("<cword>")<CR><CR> nmap <C-\>f :cs find f <C-R>=expand("<cfile>")<CR><CR> nmap <C-\>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR> nmap <C-\>d :cs find d <C-R>=expand("<cword>")<CR><CR>
.bashrc
1 # .bashrc 2 3 # Source global definitions 4 if [ -f /etc/bashrc ]; then 5 . /etc/bashrc 6 fi 7 8 # User specific aliases and functions 9 #export PATH=./:/media/sdb1/xiaoxi.jiang/workspace/ngram/srilm_64/bin/i686_c/:$PATH 10 #export LD_LIBRARY_PATH=/media/sdb1/xiaoxi.jiang/galaxy_dist/lib64/:./:$LD_LIBRARY_PATH 11 export LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64/:./:$LD_LIBRARY_PATH 12 13 export ip='65' 14 #export PS1='[\u\[\e[1;36m\]@\[$ip\[\e[1;35m\]\]:\W\[\e[0m\]]$' 15 export PS1='[\u\[\e[1;36m\]@\[$ip\[\e[1;35m\]\] \W\[\e[0m\]]$' 16 17 18 # Auto add env parameter $PROMPT_COMMAND when use non-Linux tty login by ssh. 19 if [ "$SSH_CONNECTION" != '' -a "$TERM" != 'linux' ]; then 20 declare -a HOSTIP 21 HOSTIP=`echo $SSH_CONNECTION |awk '{print $3}'` 22 export PROMPT_COMMAND='echo -ne "\033]0;${USER}@$HOSTIP:[${HOSTNAME%%.*}]:${PWD/#$HOME/~} \007"' 23 fi
.bashrc
# .bashrc # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi # User specific aliases and functions export PATH=~/rpc_wrapper/:$PATH #export LD_LIBRARY_PATH=/media/sdb1/xiaoxi.jiang/galaxy_dist/lib64/:./:$LD_LIBRARY_PATH export LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64/:./:$LD_LIBRARY_PATH export PS1='[\u:\[\e[1;36m\]\W\[\e[0m\]]$'