基础知识介绍：
1. MIPS32 的内部寄存器。
最简单的办法就是通过 GDB 的命令，可以获得下面的列表
| (gdb) info registers zero at v0 v1 a0 a1 a2 a3 R0 00000000 00000001 0000000f 0000000f 00000000 0000000f 0000000e 00000071 t0 t1 t2 t3 t4 t5 t6 t7 R8 00000072 00000001 00000203 80003cb1 80003cb0 0000007f 00000080 00000008 s0 s1 s2 s3 s4 s5 s6 s7 R16 00000001 80003bb0 00000000 00000000 00000000 00000000 00000000 00000000 t8 t9 k0 k1 gp sp s8 ra R24 0000101a 0000000d 00000000 00000000 8000bbd0 807fffb8 00000000 80000830 sr lo hi bad cause pc 00000000 00000000 00000007 00000000 00000000 80000830 fsr fir 00000000 00000000 |
除了 32 个通用寄存器以及别名外，还有 8 个专用寄存器，分别是：
sr ( 全称 Status ,CP0 Reg12) Processor status and control; interrupt control; and shadow set control
lo ( 全称 WatchLo , CP0 Reg18) Low-order watchpoint address
hi ( 全称 WatchHi, CP0 Reg19) High-order watchpoint address
bad ( 全称 BadVAddr, CP0 Reg8) Reports the address for the most recent address-related exception
cause (CP0 Reg13) Cause of last exception
pc 很明显这个是程序计数寄存器，奇怪的是在 32 个通用寄存器以及 CP0 的 32 个寄存器中都没有找到他，最接近的一个是 CP0Reg14 EPC (Program counter at last exception.)
fsr 浮点相关寄存器，具体用途不明
fir 浮点相关寄存器，具体用途不明
下表描述 32 个通用寄存器的别名和用途
| ;REGISTER |
NAME |
USAGE |
| $0 |
$zero |
常量 0(constant value 0) |
| $1 |
$at |
保留给汇编器 (Reserved for assembler) |
| $2-$3 |
$v0-$v1 |
函数调用返回值 (values for results and expression evaluation) |
| $4-$7 |
$a0-$a3 |
函数调用参数 (arguments) |
| $8-$15 |
$t0-$t7 |
暂时的 ( 或随便用的 ) |
| $16-$23 |
$s0-$s7 |
保存的 ( 或如果用，需要 SAVE/RESTORE 的 )(saved) |
| $24-$25 |
$t8-$t9 |
暂时的 ( 或随便用的 ) |
| $28 |
$gp |
全局指针 (Global Pointer) |
| $29 |
$sp |
堆栈指针 (Stack Pointer) |
| $30 |
$fp |
帧指针 (Frame Pointer) |
| $31 |
$ra |
返回地址 (return address) |
Table: MIPS registers and the convention governing their use.
| Register Name |
Number |
Usage |
| zero |
0 |
Constant 0 |
| at |
1 |
Reserved for assembler |
| v0 |
2 |
Expression evaluation and results of a function |
| v1 |
3 |
Expression evaluation and results of a function |
| a0 |
4 |
Argument 1 |
| a1 |
5 |
Argument 2 |
| a2 |
6 |
Argument 3 |
| a3 |
7 |
Argument 4 |
| t0 |
8 |
Temporary (not preserved across call) |
| t1 |
9 |
Temporary (not preserved across call) |
| t2 |
10 |
Temporary (not preserved across call) |
| t3 |
11 |
Temporary (not preserved across call) |
| t4 |
12 |
Temporary (not preserved across call) |
| t5 |
13 |
Temporary (not preserved across call) |
| t6 |
14 |
Temporary (not preserved across call) |
| t7 |
15 |
Temporary (not preserved across call) |
| s0 |
16 |
Saved temporary (preserved across call) |
| s1 |
17 |
Saved temporary (preserved across call) |
| s2 |
18 |
Saved temporary (preserved across call) |
| s3 |
19 |
Saved temporary (preserved across call) |
| s4 |
20 |
Saved temporary (preserved across call) |
| s5 |
21 |
Saved temporary (preserved across call) |
| s6 |
22 |
Saved temporary (preserved across call) |
| s7 |
23 |
Saved temporary (preserved across call) |
| t8 |
24 |
Temporary (not preserved across call) |
| t9 |
25 |
Temporary (not preserved across call) |
| k0 |
26 |
Reserved for OS kernel |
| k1 |
27 |
Reserved for OS kernel |
| gp |
28 |
Pointer to global area |
| sp |
29 |
Stack pointer |
| fp or s8 |
30 |
Frame pointer |
| ra |
31 |
Return address (used by function call) |
2. 基于 Linux 的环境，应用程序可以通过抛出信号的方法挂起当前的任务，操作系统会将该任务控制块信息 (TCB) 交由应用程序注册的信号处理函数来处理，该信息中包含了
下面这个信号量上下文结构体，里面含有我们需要的 CPU 寄存器信息。
linux/2.4.20/include/asm-mips/sigcontext.h
| /* * Keep this struct definition in sync with the sigcontext fragment * in arch/mips/tools/offset.c */ struct sigcontext { unsigned int sc_regmask; /* Unused */ unsigned int sc_status; unsigned long long sc_pc; unsigned long long sc_regs[32]; unsigned long long sc_fpregs[32]; unsigned int sc_ownedfp; /* Unused */ unsigned int sc_fpc_csr; unsigned int sc_fpc_eir; /* Unused */ unsigned int sc_used_math; unsigned int sc_ssflags; /* Unused */ unsigned long long sc_mdhi; unsigned long long sc_mdlo;
unsigned int sc_cause; /* Unused */ unsigned int sc_badvaddr; /* Unused */
unsigned long sc_sigset[4]; /* kernel's sigset_t */ }; |
3. mips32 常用汇编指令描述
源代码：
| #include <stdio.h> #include <stdlib.h>
int func_b(int a) { return 0; }
int func_a(int a) { func_b(0); return 0; }
int main(int argc, char* argv[]) { int temp = 0; func_a(temp); return 0; } |
下面是将 -O2 编译出的 elf 反编译后 func_a 的汇编指令：
| - 0x80000810 <func_a>: lui a0,0x8000 /* a0 = 0x80000000 */ - 0x80000814 <func_a+4>: lui a1,0x8000 /* a1 = 0x80000000 */ - 0x80000818 <func_a+8>: addiu sp,sp,-24 /* sp = sp - 24 = 0x807fffd0 - 24 = 0x807FFFB8 */ - 0x8000081c <func_a+12>: addiu a0,a0,12876 /* a0 = a0 + 12876 = 0x8000324C */ - 0x80000820 <func_a+16>: addiu a1,a1,12888 /* a1 = a1 + 12888 */ - 0x80000824 <func_a+20>: sw ra,16(sp) /* SW Store Word Mem[Rs+offset] = Rt ra = 0x80000858 sp = 0x807FFFB8 功能相当于下面的 C 代码 *(unsigned int*)(sp + 16) = ra */ - 0x80000828 <func_a+24>: jal 0x80000dd0 <printf> /* JAL Jump and Link GPR[31] = PC + 8 PC = PC[31:28] || offset<<2 ra = pc+8 = 0x80000828 + 8 = 0x80000830 pc = 0x80000dd0 */ 0x8000082c <func_a+28>: li a2,78 - 0x80000830 <func_a+32>: jal 0x800007e0 <func_b> 0x80000834 <func_a+36>: move a0,zero - 0x80000838 <func_a+40>: lw ra,16(sp) - 0x8000083c <func_a+44>: move v0,zero /* v0 = 0 */ - 0x80000840 <func_a+48>: jr ra JR Jump Register PC = Rs 0x80000844 <func_a+52>: addiu sp,sp,24 |
阅读上面代码发现一个问题：
为什么 ra = pc+8 而不是 pc+4 呢？这样看来 0x8000082c 、 0x80000834 、 0x80000844 这 3 个地址对应的指令不会被执行到。
下面这段来自《 MIPS32 4K Processor Core Family Software User’s Manual 》
| Jump and branch instructions change the control flow of a program. All jump and branch instructions occur with a delay of one instruction: that is, the instruction immediately following the jump or branch (this is known as the instruction in the delay slot) always executes while the target instruction is being fetched from storage. |
简单的说，因为 MIPS 的多级流水机制导致 Jump 和 Branch 指令后面的一个指令会被放在延时槽中，无条件执行。
下面是一些网站上找到的描述：
http://gcc.gnu.org/ml/gcc-help/2008-01/msg00059.html
| How to traceback call stack on MIPS arch?
Gcc saves the frame pointer to fp(s8) register at the beginning of each function if compiling source with -O0. But it won't do so if compiling source with -O2. Without frame pointers, can I trace back call stacks in current function context? Or is there any option which forces gcc to save frame pointers for MIPS arch?
PRC 2008/1/8 |
这个问题是关于 GCC 优化的，看看下面这个表就清楚了。从实际测试情况看， fp(s8) 也就是通用寄存器 30 可以用 sp 也就是通用寄存器 29 来代替，因为在函数领空（不包含子函数调用）的时候 sp 是保持固定值的，因为没有类似于 x86 的 pop 和 push 指令，该问题只着眼于当前函数上下文，没有考虑到向前追溯的问题。
| mips_fp_be-gcc -O0 -g test.c -o btO0 mips_fp_be-objdump -S btO0 > asmO0.txt |
mips_fp_be-gcc -O2 -g test.c -o btO2 mips_fp_be-objdump -S btO2 > asmO2.txt |
| 00400e0c <main>:
int main (int argc, char **argv) { 400e0c: 3c1c0fc0 lui gp,0xfc0 400e10: 279c79b4 addiu gp,gp,31156 400e14: 0399e021 addu gp,gp,t9 400e18: 27bdffd8 addiu sp,sp,-40 400e1c: afbc0010 sw gp,16(sp) 400e20: afbf0020 sw ra,32(sp) 400e24: afbe001c sw s8,28(sp) 400e28: afbc0018 sw gp,24(sp) 400e2c: 03a0f021 move s8,sp 400e30: afc40028 sw a0,40(s8) 400e34: afc5002c sw a1,44(s8) print_backtrace (); 400e38: 8f9980a4 lw t9,-32604(gp) 400e3c: 00000000 nop 400e40: 0320f809 jalr t9 400e44: 00000000 nop 400e48: 8fdc0010 lw gp,16(s8) return 0; 400e4c: 00001021 move v0,zero } 400e50: 03c0e821 move sp,s8 400e54: 8fbf0020 lw ra,32(sp) 400e58: 8fbe001c lw s8,28(sp) 400e5c: 03e00008 jr ra 400e60: 27bd0028 addiu sp,sp,40 ... |
00400de4 <main>:
int main (int argc, char **argv) { 400de4: 3c1c0fc0 lui gp,0xfc0 400de8: 279c79dc addiu gp,gp,31196 400dec: 0399e021 addu gp,gp,t9 400df0: 27bdffe0 addiu sp,sp,-32 400df4: afbc0010 sw gp,16(sp) 400df8: afbf001c sw ra,28(sp) 400dfc: afbc0018 sw gp,24(sp) print_backtrace (); 400e00: 8f9980a4 lw t9,-32604(gp) 400e04: 00000000 nop 400e08: 0320f809 jalr t9 400e0c: 00000000 nop 400e10: 8fbc0010 lw gp,16(sp) return 0; } 400e14: 8fbf001c lw ra,28(sp) 400e18: 00001021 move v0,zero 400e1c: 03e00008 jr ra 400e20: 27bd0020 addiu sp,sp,32 ... |
| You need to use the unwinder.
#include <unwind.h> #include <stdio.h>
static _Unwind_Reason_Code backtrace_helper (struct _Unwind_Context *ctx, void *a) { void *ip = (void*)_Unwind_GetIP (ctx); fprintf (stdout, " %p/n", ip); return _URC_NO_REASON; }
void print_backtrace (void) { _Unwind_Backtrace (backtrace_helper, NULL); }
int main (int argc, char **argv) { print_backtrace (); return 0; } |
该回答解释了上面的问题，提出用 _Unwind_Backtrace 函数来显示 caller 的地址，其实就 MIPS 而言对于单枝函数（没有子函数调用的函数）只要读 ra 寄存器的值就可以了，对于非单枝函数需要从堆栈里恢复出 ra 并显示。同样的问题这个函数也没有做向前的追溯。
| For that to work, you must compile all the code with -fexceptions .
You could also try compiling all the code with -fno-omit-framepointer and writing your own unwinder. I posted such an unwinder to java-patches@gcc.gnu.org several years ago. Later versions of GCC are starting to do optimizations in the function prolog that make unwinding without the unwinder meta-data very difficult.
David Daney |
该回答给出了 2 个 GCC 的参数，也是回答了上面的问题。
根据 MIPS 寄存器定义和 GCC 生成的机器码可以得到网上描述的“ MIPS 不支持 C 函数的帧结构”。
我的理解是和 x86 的 ESP 和 EBP 寄存器比， MIPS 的确是无法直观的从寄存器里找到当前情况下堆栈的底部，每个函数对应的栈的尺寸是由 GCC 计算出的，函数返回时的栈的恢复也是通过立即数的方式通过指令来实现，如（ addiu sp,sp,40 ），这样我们做 BackTrace 最重要的一个问题就是确定每级函数的堆栈尺寸。
我觉得要确定每级函数的堆栈尺寸，只能通过解析机器码来实现。凑巧发现 netbsd 系统在内核代码中实现了对 MIPS 体系结构 backtrace 的支持，现在来分析下核心代码。
代码在：
代码的全路径：
/src/sys/arch/mips/mips/trap.c
#define MIPS_JR_RA 0x03e00008 /* instruction code for jr ra */
#define MIPS_JR_K0 0x03400008 /* instruction code for jr k0 */
#define MIPS_ERET 0x42000018 /* instruction code for eret */
/*
* Do a stack backtrace.
* (*printfn)() prints the output to either the system log,
* the console, or both.
*/
void
stacktrace_subr(mips_reg_t a0, mips_reg_t a1, mips_reg_t a2, mips_reg_t a3,
vaddr_t pc, vaddr_t sp, vaddr_t fp, vaddr_t ra,
void (*printfn)(const char*, ...))
{
vaddr_t va, subr;
unsigned instr, mask;
InstFmt i;
int more, stksize;
unsigned int frames = 0;
int foundframesize = 0;
#ifdef DDB
db_expr_t diff;
db_sym_t sym;
#endif
/* Jump here when done with a frame, to start a new one */
loop:
stksize = 0;
subr = 0;
if (frames++ > 100) {
(*printfn)("/nstackframe count exceeded/n");
/* return breaks stackframe-size heuristics with gcc -O2 */
goto finish; /*XXX*/
}
/* check for bad SP: could foul up next frame */
if (sp & 3 || (intptr_t)sp >= 0) { /* 首先堆栈值应该4 字节地址对齐，其次bit31 应该为1 表示内核空间*/ (*printfn)("SP 0x%x: not in kernel/n", sp);
ra = 0;
subr = 0;
goto done;
}
/* Check for bad PC */
if (pc & 3 || (intptr_t)pc >= 0 || (intptr_t)pc >= (intptr_t)edata) {
(*printfn)("PC 0x%x: not in kernel space/n", pc);
ra = 0;
goto done;
}
#ifdef DDB
/*
* Check the kernel symbol table to see the beginning of
* the current subroutine.
*/
diff = 0;
sym = db_search_symbol(pc, DB_STGY_ANY, &diff);
if (sym != DB_SYM_NULL && diff == 0) {
/* check func(foo) __attribute__((__noreturn__)) case */
instr = kdbpeek(pc - 2 * sizeof(int));
i.word = instr;
if (i.JType.op == OP_JAL) {
sym = db_search_symbol(pc - sizeof(int),
DB_STGY_ANY, &diff);
if (sym != DB_SYM_NULL && diff != 0)
diff += sizeof(int);
}
}
if (sym == DB_SYM_NULL) {
ra = 0;
goto done;
}
va = pc - diff;
#else /* 基本来到这里，我们没有这个存放符号信息的数据库 */ /*
* Find the beginning of the current subroutine by scanning backwards
* from the current PC for the end of the previous subroutine.
*
* XXX This won't work well because nowadays gcc is so aggressive
* as to reorder instruction blocks for branch-predict.
* (i.e. 'jr ra' wouldn't indicate the end of subroutine)
*/
/* 这里向前搜索OPCODE ，直到找到0x03e00008 或者产生地址越界（超出了代码段最小可能地址verylocore ），这样做是不可靠的，因为是通过搜索上一个函数的特征机器码来确定当前函数的顶部，所以一个假设前提是前面还有函数*/ va = pc;
do {
va -= sizeof(int);
if (va <= (vaddr_t)verylocore)
goto finish;
instr = kdbpeek(va);
if (instr == MIPS_ERET)
goto mips3_eret;
} while (instr != MIPS_JR_RA && instr != MIPS_JR_K0);
/* skip back over branch & delay slot */
va += sizeof(int); /* 跳过延时槽*/ mips3_eret:
va += sizeof(int); /* 跳过JR_RA 指令 */ /* skip over nulls which might separate .o files */
while ((instr = kdbpeek(va)) == 0)
va += sizeof(int); /* 跳过无用的空指令 */ #endif
subr = va; /* 得到当前函数的首地址 */
/* scan forwards to find stack size
and any saved registers */
stksize = 0;
more = 3;
mask = 0;
foundframesize = 0;
for (va = subr; more; va += sizeof(int),
more = (more == 3) ? 3 : more - 1) {
/* stop if hit our current position */
if (va >= pc)
break;
instr = kdbpeek(va);
i.word = instr;
switch (i.JType.op) {
case OP_SPECIAL:
switch (i.RType.func) {
case OP_JR:
case OP_JALR:
more = 2; /* stop after next instruction */
break;
case OP_SYSCALL:
case OP_BREAK:
more = 1; /* stop now */
};
break;
case OP_BCOND:
case OP_J:
case OP_JAL:
case OP_BEQ:
case OP_BNE:
case OP_BLEZ:
case OP_BGTZ:
more = 2; /* stop after next instruction */
break;
case OP_COP0:
case OP_COP1:
case OP_COP2:
case OP_COP3:
switch (i.RType.rs) {
case OP_BCx:
case OP_BCy:
more = 2; /* stop after next instruction */
};
break;
case OP_SW:/* 解析存放在堆栈上的有用数据：包括4 个传递参数的寄存器、帧指针、函数返回地址*/ #if !defined(__mips_o32)
case OP_SD:
#endif
{
size_t size = (i.JType.op == OP_SW) ? 4 : 8;
/* look for saved registers on the stack */
if (i.IType.rs != 29)
break;
/* only restore the first one */
if (mask & (1 << i.IType.rt))
break;
mask |= (1 << i.IType.rt);
switch (i.IType.rt) {
case 4: /* a0 */
a0 = kdbrpeek(sp + (short)i.IType.imm, size);
break;
case 5: /* a1 */
a1 = kdbrpeek(sp + (short)i.IType.imm, size);
break;
case 6: /* a2 */
a2 = kdbrpeek(sp + (short)i.IType.imm, size);
break;
case 7: /* a3 */
a3 = kdbrpeek(sp + (short)i.IType.imm, size);
break;
case 30: /* fp */
fp = kdbrpeek(sp + (short)i.IType.imm, size);
break;
case 31: /* ra */
ra = kdbrpeek(sp + (short)i.IType.imm, size);
}
break;
}
case OP_ADDI:
case OP_ADDIU: /* 这里来分析堆栈的尺寸，是一个类似于addiu sp,sp,-24 的指令，我们要将立即数取出，并负负得正 */ #if !defined(__mips_o32)
case OP_DADDI:
case OP_DADDIU:
#endif
/* look for stack pointer adjustment */
if (i.IType.rs != 29 || i.IType.rt != 29)
break;
/* don't count pops for mcount */
if (!foundframesize) {
stksize = - ((short)i.IType.imm);
foundframesize = 1;
}
}
}
done:
(*printfn)("%s+%"PRIxVADDR" (%"PRIxREGISTER",%"PRIxREGISTER",%"PRIxREGISTER",%"PRIxREGISTER") ra %"PRIxVADDR" sz %d/n",
fn_name(subr), pc - subr, a0, a1, a2, a3, ra, stksize);
if (ra) {
if (pc == ra && stksize == 0)/* 出现堆栈长度为零并且当前程序指针为返回地址，则出现循环调用，为异常情况，应直接返回 */ (*printfn)("stacktrace: loop!/n");
else {
pc = ra;
sp += stksize;
ra = 0;
goto loop;
}
} else {/* 返回地址为零表示已经追溯到最顶层 */ finish:
if (curlwp)
(*printfn)("User-level: pid %d.%d/n",
curlwp->l_proc->p_pid, curlwp->l_lid);
else
(*printfn)("User-level: curlwp NULL/n");
}
}
|
下面演示将上面的函数移植到 Linux 下，应用程序出现异常时的 BackTrace 显示
应用程序代码：
| #include <stdio.h> #include <stdlib.h> #include <signal.h>
extern int sig_set(int signo); int func_a(unsigned char* a, unsigned char * b, int c, int d); int func_b(unsigned char* a); int func_c(unsigned char* a);
int func_a(unsigned char* a, unsigned char * b, int c, int d) { func_b(a); return 0; }
int func_b(unsigned char* a) { func_c(a); return 0; }
int func_c(unsigned char* a) { *a = "Hello"; return 0; }
int main(int argc, char* argv[]) { unsigned char* a; unsigned char buffer[128]; a = NULL; if( sig_set(SIGSEGV) != 0) printf("cannot catch SIGSEGV/n"); if( sig_set(SIGILL) != 0) printf("cannot catch SIGILL/n");
printf("trying to catch SIGFPE/n"); if( sig_set(SIGFPE) != 0) printf("cannot catch SIGFPE/n");
printf("trying to catch SIGBUS/n"); if( sig_set(SIGBUS) != 0) printf("cannot catch SIGBUS/n");
func_a(a, buffer, 2, 3); return 0; } |
先注册了 4 个信号 SIGSEGV 、 SIGILL 、 SIGFPE 、 SIGBUS 用自己的处理函数来处理。
在函数 func_c 调用的时候会出现异常，因为 a 的地址为 NULL ，这时将整个函数调用的过程显示出来，输入如下：
| fSegvHandler default sigNo [11] pc=00400a84 cause 00000003 badaddr 00000000
d00:00000000 d01:7fff7bd0 d02:00401ee0 d03:00000000 d04:00000000 d05:7fff7d08 d06:00000002 d07:00000003 d08:0000d500 d09:0000000a d10:00000000 d11:00000000 d12:00001000 d13:00000000 d14:0000000a d15:15010000 d16:00401d40 d17:7fff7df4 d18:00401ca0 d19:00000001 d20:00400a9c d21:10012608 d22:ffffffff d23:00000000 d24:00000000 d25:00400a4c d26:00000010 d27:00000000 d28:10008040 d29:7fff7c88 d30:7fff7c88 d31:00400a30 k0(d26):00000010 k1(d27):00000000 gp(d28):10008040 sp(d29):7fff7c88 fp(d30):7fff7c88 ra(d31):00400a30 hi:00000000 lo:00000000
Calling backtrace: Func [400a4c] PC [400a84] Arg0~3 (0,7fff7d08,2,3) RetAddr [400a30] stackSize [16] Func [4009f4] PC [400a30] Arg0~3 (0,7fff7d08,2,3) RetAddr [4009d8] stackSize [40] Func [400990] PC [4009d8] Arg0~3 (0,7fff7d08,2,3) RetAddr [400c38] stackSize [40] Func [400a9c] PC [400c38] Arg0~3 (0,7fff7d08,2,3) RetAddr [2ab18b50] stackSize [176] Func [2ab189b0] PC [2ab18b50] Arg0~3 (0,7fff7d08,2,3) RetAddr [400790] stackSize [32] Func [400790] PC [400790] Arg0~3 (0,7fff7d08,2,3) RetAddr [0] stackSize [0] finished Segmentation fault |
上面输出的结果可以和实际情况对应起来：
这里是函数调用栈上各个函数的基地址
| -bash-3.00$ mips_fp_be-objdump -t test1 | grep 400a4c 00400a4c g F .text 00000000 func_c -bash-3.00$ mips_fp_be-objdump -t test1 | grep 4009f4 004009f4 g F .text 00000000 func_b -bash-3.00$ mips_fp_be-objdump -t test1 | grep 400990 00400990 g F .text 00000000 func_a -bash-3.00$ mips_fp_be-objdump -t test1 | grep 400a9c 00400a9c g F .text 00000000 main -bash-3.00$ mips_fp_be-objdump -t test1 | grep 400790 00400790 g F .text 00000000 __start |
PC 表示当前函数执行的地址， RetAddr 为函数返回地址（和上级函数的 PC 对应）
例如第一行的输出：
Func [400a4c] PC [400a84] Arg0~3 (0,7fff7d08,2,3) RetAddr [400a30] stackSize [16]
对应于下面反汇编出来的代码，看的更清楚。
| int func_c(unsigned char* a) { 400a4c : 3c1c0fc0 lui gp,0xfc0 400a50: 279c75f4 addiu gp,gp,30196 400a54: 0399e021 addu gp,gp,t9 400a58: 27bdfff0 addiu sp,sp,-16 400a5c: afbc0000 sw gp,0(sp) 400a60: afbe000c sw s8,12(sp) 400a64: afbc0008 sw gp,8(sp) 400a68: 03a0f021 move s8,sp 400a6c: afc40010 sw a0,16(s8) *a = "Hello"; 400a70: 8fc30010 lw v1,16(s8) 400a74: 8f828018 lw v0,-32744(gp) 400a78: 00000000 nop 400a7c: 24421ee0 addiu v0,v0,7904 400a80: 00000000 nop 400a84 : a0620000 sb v0,0(v1) return 0; 400a88: 00001021 move v0,zero } 400a8c: 03c0e821 move sp,s8 400a90: 8fbe000c lw s8,12(sp) 400a94: 03e00008 jr ra 400a98: 27bd0010 addiu sp,sp,16 |
| int func_b(unsigned char* a) { 4009f4: 3c1c0fc0 lui gp,0xfc0 4009f8: 279c764c addiu gp,gp,30284 4009fc: 0399e021 addu gp,gp,t9 400a00: 27bdffd8 addiu sp,sp,-40 400a04: afbc0010 sw gp,16(sp) 400a08: afbf0020 sw ra,32(sp) 400a0c: afbe001c sw s8,28(sp) 400a10: afbc0018 sw gp,24(sp) 400a14: 03a0f021 move s8,sp 400a18: afc40028 sw a0,40(s8) func_c(a); 400a1c: 8fc40028 lw a0,40(s8) 400a20: 8f998030 lw t9,-32720(gp) 400a24: 00000000 nop 400a28: 0320f809 jalr t9 400a2c: 00000000 nop 400a30 : 8fdc0010 lw gp,16(s8) return 0; 400a34: 00001021 move v0,zero } 400a38: 03c0e821 move sp,s8 400a3c: 8fbf0020 lw ra,32(sp) 400a40: 8fbe001c lw s8,28(sp) 400a44: 03e00008 jr ra 400a48: 27bd0028 addiu sp,sp,40 |