HTTP header中的 Cachecontrol

HTTP头的Expires与Cache-control

1.概念

Cache-control用于控制HTTP缓存(在HTTP/1.0中可能部分没实现,仅仅实现了Pragma: no-cache)

数据包中的格式:

Cache-Control: cache-directive

cache-directive可以为以下:

request时用到:

| "no-cache"| "no-store"| "max-age" "=" delta-seconds| "max-stale" [ "=" delta-seconds ]| "min-fresh" "=" delta-seconds| "no-transform"| "only-if-cached"| "cache-extension"

response时用到:

| "public"| "private" [ "=" <"> field-name <"> ]| "no-cache" [ "=" <"> field-name <"> ]| "no-store"| "no-transform"| "must-revalidate"| "proxy-revalidate"| "max-age" "=" delta-seconds| "s-maxage" "=" delta-seconds| "cache-extension"部分说明:根据是否可缓存分为Public 指示响应可被任何缓存区缓存。Private 指示对于单个用户的整个或部分响应消息,不能被共享缓存处理。这允许服务器仅仅描述当用户的部分响应消息,此响应消息对于其他用户的请求无效。no-cache 指示请求或响应消息不能缓存(HTTP/1.0用Pragma的no-cache替换)根据什么能被缓存no-store 用于防止重要的信息被无意的发布。在请求消息中发送将使得请求和响应消息都不使用缓存。根据缓存超时max-age 指示客户机可以接收生存期不大于指定时间(以秒为单位)的响应。min-fresh 指示客户机可以接收响应时间小于当前时间加上指定时间的响应。max-stale 指示客户机可以接收超出超时期间的响应消息。如果指定max-stale消息的值,那么客户机可以接收超出超时期指定值之内的响应消息。Expires 表示存在时间,允许客户端在这个时间之前不去检查(发请求),等同max-age的效果。但是如果同时存在,则被Cache-Control的max-age覆盖。格式:Expires = "Expires" ":" HTTP-date例如Expires: Thu, 01 Dec 1994 16:00:00 GMT (必须是GMT格式) 2.应用通过HTTP的META设置expires和cache-control<meta http-equiv="Cache-Control" content="max-age=7200" /><meta http-equiv="Expires" content="Mon, 20 Jul 2009 23:00:00 GMT" />上述设置仅为举例,实际使用其一即可。这样写的话仅对该网页有效,对网页中的图片或其他请求无效,并不会做任何cache。这样客户端的请求就多了,尽管只是检查Last-modified状态的东西,但是请求一多对浏览速度必定有影响。如果要对文件添加cache可以通过apache的mod_expire模块,写法为<IfModule mod_expires.c>ExpiresActive OnExpiresDefault "access plus 1 days"</IfModule>记得ExpiresActive设为On,我起先没设置On,似乎怎样YSlow都查不到缓存机制。这样添加的话就是默认所有的。如果要针对个别MIME类型则可以:ExpiresByType image/gif "access plus 5 hours 3 minutes"见 Apache Module mod_expires另外,当点击浏览器上的刷新,客户端发送的请求中均是max-age=0,表示validate操作,发送请求到服务器要求检查cache,再更新cache,一般得到的是304 Not Modified,表示没变动。 

参考:
HTTP RFC2616 HeaderField
HTTP协议基础


----------------------------------------------------------

Cache-control 常见的取值有private、no-cache、max-age、must-revalidate等

网页的缓存是由HTTP消息头中的“Cache-control ”来控制的,常见的取值有private、no-cache、max-age、must-revalidate等,默认为private。其作用根据不同的重新浏览方式分为以下几种情况:
(1) 打开新窗口
如果指定cache-control 的值为private、no-cache、must-revalidate,那么打开新窗口访问时都会重新访问服务器。而如果指定了max-age值,那么在此值内的时间里就不会重新访问服务器,例如:
Cache-control : max-age=5
表示当访问此网页后的5秒内再次访问不会去服务器
(2) 在地址栏回车
如果值为private或must-revalidate(和网上说的不一样),则只有第一次访问时会访问服务器,以后就不再访问。如果值为no-cache,那么每次都会访问。如果值为max-age,则在过期之前不会重复访问。
(3) 按后退按扭
如果值为private、must-revalidate、max-age,则不会重访问,而如果为no-cache,则每次都重复访问
(4) 按刷新按扭
无论为何值,都会重复访问

当指定Cache-control 值为“no-cache”时,访问此页面不会在Internet临时文章夹留下页面备份。
另外,通过指定“Expires”值也会影响到缓存。例如,指定Expires值为一个早已过去的时间,那么访问此网时若重复在地址栏按回车,那么每次都会重复访问:
Expires: Fri, 31 Dec 1999 16:00:00 GMT
在ASP中,可以通过Response对象的Expires、ExpiresAbsolute属性控制Expires值;通过Response对象的CacheControl属性控制Cache-control 的值,例如:
Response.ExpiresAbsolute = #2000-1-1# ‘ 指定绝对的过期时间,这个时间用的是服务器当地时间,会被自动转换为GMT时间
Response.Expires = 20 ‘ 指定相对的过期时间,以分钟为单位,表示从当前时间起过多少分钟过期。
Response.CacheControl = “no-cache”

---------------------------------------------------------------

网页的缓存是由 HTTP消息头中的“Cache-control”来控制的,常见的取值有private、no-cache、max-age、must- revalidate等,默认为private。其作用根据不同的重新浏览方式分为以下几种情况:

(1) 打开新窗口
    值为private、no-cache、must-revalidate,那么打开新窗口访问时都会重新访问服务器。
而如果指 定了max-age值,那么在此值内的时间里就不会重新访问服务器,例如:
Cache-control: max-age=5(表示当访问此网页后的5秒内再次访问不 会去服务器)

(2) 在地址栏回车
    值为private或must-revalidate则只有第一次访问时会访问服务器,以后就不再访问。
    值为no-cache,那么每次都会访问。
    值为max-age,则在过期之前不会重复访问。

(3) 按后退按扭
   值为private、must-revalidate、max-age,则不会重访问,
   值为no-cache,则每次都重复访问

(4) 按刷新按扭
  无论为何值,都会重复访问

Cache-control值为“no-cache”时,访问此页面不会 在Internet临时文章夹留下页面备份。

另外,通过指定“Expires”值也会影响到缓存。 例如,指定Expires值为一个早已过去的时间,那么访问此网时若重复在地址栏按回车,那么每次都会重复访问: Expires: Fri, 31 Dec 1999 16:00:00 GMT

比如:禁止页面在IE中缓存

http响应消息头 部设置:

CacheControl = no-cache
Pragma=no-cache
Expires = -1

Expires是个好东东,如果服务器上的网页经常变化,就把它设置为-1,表示立即过期。如果一个网页 每天凌晨1点更新,可以把Expires设置为第二天的凌晨1点。

当HTTP1.1服务器指定 CacheControl = no-cache时,浏览器就不会缓存该网页。

旧式 HTTP 1.0 服务器不能使用 Cache-Control 标题。
所以为了向后兼容 HTTP 1.0 服务器,IE使用Pragma:no-cache 标题对 HTTP 提供特殊支持。
如果客户端通过安全连接 (与服务器通讯,且服务器在 响应中返回 Pragma:no-cache 标题,
则 Internet Explorer不会缓存此响应。注意:Pragma:no-cache 仅当在安全连接中使用时才防止缓存,如果在非安全页中使用,处理方式与 Expires:-1相同,该页将被缓存,但被标记为立即过期header常用指令
header分为三部分:
第 一部分为HTTP协议的版本(HTTP-Version);
第二部分为状态代码(Status);
第 三部分为原因短语(Reason-Phrase)。

// fix 404 pages:   用这个header指令来解决URL重写产生的404 header 
header('HTTP/1.1 200 OK');   
  
// set 404 header:   页面没找到
header('HTTP/1.1 404 Not Found');   
  
// 页面被永久删除,可以告诉搜索引擎更新它们的urls
// set Moved Permanently header (good for redrictions)   
// use with location header   
header('HTTP/1.1 301 Moved Permanently');  

// 访问受限
header('HTTP/1.1 403 Forbidden');

// 服务器错误
header('HTTP/1.1 500 Internal Server Error');
  
// 重定向到一个新的位置
// redirect to a new location:   
header('Location: http://www.sina.com.cn);   
  
延迟一段时间后重定向
// redrict with delay:   
header('Refresh: 10; url=http://www.sina.com.cn');   
print 'You will be redirected in 10 seconds';   
  
// 覆盖 X-Powered-By value
// override X-Powered-By: PHP:   
header('X-Powered-By: PHP/4.4.0');   
header('X-Powered-By: Brain/0.6b');   
  
// 内容语言 (en = English)
// content language (en = English)   
header('Content-language: en');   
  
//最后修改时间 (在缓存的时候可以用到)
// last modified (good for caching)   
$time = time() - 60; // or filemtime($fn), etc   
header('Last-Modified: '.gmdate('D, d M Y H:i:s', $time).' GMT');   
  
// 告诉浏览器要获取的内容还没有更新
// header for telling the browser that the content   
// did not get changed   
header('HTTP/1.1 304 Not Modified');   
  
// 设置内容的长度 (缓存的时候可以用到):
// set content length (good for caching):   
header('Content-Length: 1234');   
  
// 用来下载文件:
// Headers for an download:   
header('Content-Type: application/octet-stream');   
header('Content-Disposition: attachment; filename="example.zip"');   
header('Content-Transfer-Encoding: binary');   
  
// 禁止缓存当前文档:
// load the file to send:readfile('example.zip');   
// Disable caching of the current document:   
header('Cache-Control: no-cache, no-store, max-age=0, must-revalidate');   
header('Expires: Mon, 26 Jul 1997 05:00:00 GMT');    

// 设置内容类型:
// Date in the pastheader('Pragma: no-cache');   
// set content type:   
header('Content-Type: text/html; charset=iso-8859-1');   
header('Content-Type: text/html; charset=utf-8');   
header('Content-Type: text/plain');   
  
// plain text file   
header('Content-Type: image/jpeg');    
  
// JPG picture   
header('Content-Type: application/zip');    
  
// ZIP file   
header('Content-Type: application/pdf');    
  
// PDF file   
header('Content-Type: audio/mpeg');    
  
// Audio MPEG (MP3,...) file   
header('Content-Type: application/x-shockwave-flash');    
  
// 显示登录对话框,可以用来进行HTTP认证
// Flash animation// show sign in box   
header('HTTP/1.1 401 Unauthorized');   
header('WWW-Authenticate: Basic realm="Top Secret"');   
print 'Text that will be displayed if the user hits cancel or ';   
print 'enters wrong login data';
?>
现在表单的填写,我们可以用AJAX对用户随时进行验证,进行友好的提示,但是在用户没有留意AJAX友好提示,提交了错误的表单,跳回原页,而填写的信 息却全部丢失了。要支持页面回跳,有以下的办法: 
1.使用session_cache_limiter方法: session_cache_limiter('private,must-revalidate');但是要值得注意的是 session_cache_limiter()方法要写在session_start()方法之前才有用; 
2.用header来设置控制缓存的方法: header('Cache-control:private,must-revalidate');

原文地址:https://www.cnblogs.com/danghuijian/p/4400090.html