GPU驱动：R390
cuda：9.1
gcc：5.4.0
anaconda：2
GPU运算能力：2.1
CPU：8G
系统：ubuntu 16.04 x86_64
安装一般依赖项：
sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev libhdf5-serial-dev protobuf-compiler
sudo apt-get install --no-install-recommends libboost-all-dev
还有官网提到的：
以及anaconda，这些没什么特别注意的，我选择的是anaconda2,因为我要用segnet，不过我也配了3,版本可以说是文件夹，库都在那放着，你要谁，你就在caffe的config中指定谁，他就会去找，所以理论上来讲，你无比自由想用谁用谁，你可以一个项目配一个caffe。我就是这么干的。甚至不同的数据库还称一个caffe。一个不爽想从gpu换cpu那就直接make clean，然后你的caffe大楼就会井然有序的拆除。暂时还没出现什么问题。等我看看caffe 官方doc
安装驱动
1.很重要的是：如果你用ubuntu那你的显卡驱动以及cuda都必须！用apt安装！，要不cuda可能会崩溃，原文：
‘for CUDA version. Note, the cuda version may break if your NVIDIA driver and CUDA toolkit are not installed by APT.’
所以推荐：http://www.cnblogs.com/xujianqing/p/6142963.html这篇文中的显卡驱动安装方式，但是！！！版本号要从375换到390，因为cuda9要求驱动390
安装cuda
官网要求的gcc版本是5.3.1，然而自带的是5.4,不过我依旧安装成功了。如果有问题再看吧。而且在http://caffe.berkeleyvision.org/install_apt.html caffe官网的ubuntu安装页，写了16.04要用版本8的cuda，然而网上有不少9的教程，于是我来试试小白鼠好了。而且我的gpu运算能力只有2.1。可以看出我这是在作死的边缘试探。
那么试探结果就是走不通：
http://www.cnblogs.com/SweetBeens/p/8603306.html
虽然有的人安装成功，但是我没这个缘分。。
https://developer.nvidia.com/cuda-gpus包括可以安装的CUDA的Gpu型号
1.首先你要看https://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html#package-manager-metas，里面有个kernel版本安装要求，这个版本必须匹配你电脑的版本，而且在cuda之前安装，因为如果你跳过这个步骤，那么cuda driver就会自己找个版本。
具体命令
sudo apt-get install linux-headers-$(uname -r)
2.安装cuda现在官网提供的最新版本9.1，要求R390驱动，如果你想要这个版本的cuda，直接复制粘贴网上的命令行，我也不知道会出现什么。
‘Before installing the CUDA Toolkit on Linux, please ensure that you have the latest NVIDIA driver R390 installed. The latest NVIDIA R390 driver is available at: www.nvidia.com/drivers’
并且推荐使用官网提供的命令行，以及终端建议的命令行。
3.安装library package工具包
参见https://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html#package-manager-metas
3.7节，我就不翻译了命令行是：
cat /var/lib/apt/lists/*cuda*Packages | grep "Package:"
sudo apt-get install cuda
sudo apt-get install cuda-drivers
测试安装cuda
cd /usr/local/cuda-9.1/samples/1_Utilities/deviceQuery
make
sudo ./deviceQuery
这个注意自己的路径，就是你的安装路径是否是这个，以及你的版本号，这都是经常需要注意的。我这个意思就是我安装的是9.1
如果安装成功就会出现你的GPU配置：
安装caffe
比较重要的是配置文件，也就是makefile.config.
你不要复制粘贴，你要读，很容易读懂的，#之后的内容不用看，是注释掉的。你必须要改的是CPU_only，cuda路径，还有anaconda路径，不是让你满电脑找安在那里了。
通常情况下安装路径和我一样，但是文件夹里面可能会有细节的不同，这个不同来源于版本。也就是说你的版本和我一样你就可以复制粘贴了。
## Refer to http://caffe.berkeleyvision.org/installation.html # Contributions simplifying and improving our build system are welcome! # cuDNN acceleration switch (uncomment to build with cuDNN). # USE_CUDNN := 1 # CPU-only switch (uncomment to build without GPU support). # CPU_ONLY := 1 # To customize your choice of compiler, uncomment and set the following. # N.B. the default for Linux is g++ and the default for OSX is clang++ # CUSTOM_CXX := g++ # CUDA directory contains bin/ and lib/ directories that we need. CUDA_DIR := /usr/local/cuda-9.1 # On Ubuntu 14.04, if cuda tools are installed via # "sudo apt-get install nvidia-cuda-toolkit" then use this instead: # CUDA_DIR := /usr # CUDA architecture setting: going with all of them. # For CUDA < 6.0, comment the *_50 lines for compatibility. CUDA_ARCH := -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -gencode arch=compute_50,code=sm_50 -gencode arch=compute_50,code=compute_50 # BLAS choice: # atlas for ATLAS (default) # mkl for MKL # open for OpenBlas BLAS := atlas # Custom (MKL/ATLAS/OpenBLAS) include and lib directories. # Leave commented to accept the defaults for your choice of BLAS # (which should work)! # BLAS_INCLUDE := /path/to/your/blas # BLAS_LIB := /path/to/your/blas # Homebrew puts openblas in a directory that is not on the standard search path # BLAS_INCLUDE := $(shell brew --prefix openblas)/include # BLAS_LIB := $(shell brew --prefix openblas)/lib # This is required only if you will compile the matlab interface. # MATLAB directory should contain the mex binary in /bin. # MATLAB_DIR := /usr/local # MATLAB_DIR := /Applications/MATLAB_R2012b.app # NOTE: this is required only if you will compile the python interface. # We need to be able to find Python.h and numpy/arrayobject.h. #PYTHON_INCLUDE := /usr/include/python2.7 #/usr/lib/python2.7/dist-packages/numpy/core/include # Anaconda Python distribution is quite popular. Include path: # Verify anaconda location, sometimes it's in root. ANACONDA_HOME := $(HOME)/anaconda2 PYTHON_INCLUDE := $(ANACONDA_HOME)/include $(ANACONDA_HOME)/include/python2.7 $(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include # We need to be able to find libpythonX.X.so or .dylib. #PYTHON_LIB := /usr/lib PYTHON_LIB := $(ANACONDA_HOME)/lib # Homebrew installs numpy in a non standard path (keg only) # PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include # PYTHON_LIB += $(shell brew --prefix numpy)/lib # Uncomment to support layers written in Python (will link against Python libs) WITH_PYTHON_LAYER := 1 # Whatever else you find you need goes here. INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib # If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies # INCLUDE_DIRS += $(shell brew --prefix)/include # LIBRARY_DIRS += $(shell brew --prefix)/lib # Uncomment to use `pkg-config` to specify OpenCV library paths. # (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.) # USE_PKG_CONFIG := 1 BUILD_DIR := build DISTRIBUTE_DIR := distribute # Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171 # DEBUG := 1 # The ID of the GPU that 'make runtest' will use to run unit tests. TEST_GPUID := 0 # enable pretty build (comment to see full commands) Q ?= @
然后在make all的时候 ，出现了：
nvcc fatal : Unsupported gpu architecture 'compute_20'
，看http://blog.csdn.net/kemgine/article/details/78781377，删除了两行cuda配置，我放上来的config已经删掉了，请注意这一点。
于是我换到了8.0
然后就没有错误了，然后我如愿以偿的得到了内存不足这一个错误。。。
下面给出8.0的成功的config文件仅供参考
## Refer to http://caffe.berkeleyvision.org/installation.html # Contributions simplifying and improving our build system are welcome! # cuDNN acceleration switch (uncomment to build with cuDNN). # USE_CUDNN := 1 # CPU-only switch (uncomment to build without GPU support). # CPU_ONLY := 1 # To customize your choice of compiler, uncomment and set the following. # N.B. the default for Linux is g++ and the default for OSX is clang++ # CUSTOM_CXX := g++ # CUDA directory contains bin/ and lib/ directories that we need. CUDA_DIR := /usr/local/cuda-8.0 # On Ubuntu 14.04, if cuda tools are installed via # "sudo apt-get install nvidia-cuda-toolkit" then use this instead: # CUDA_DIR := /usr # CUDA architecture setting: going with all of them. # For CUDA < 6.0, comment the *_50 lines for compatibility. CUDA_ARCH := -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -gencode arch=compute_50,code=sm_50 -gencode arch=compute_50,code=compute_50 # BLAS choice: # atlas for ATLAS (default) # mkl for MKL # open for OpenBlas BLAS := atlas # Custom (MKL/ATLAS/OpenBLAS) include and lib directories. # Leave commented to accept the defaults for your choice of BLAS # (which should work)! # BLAS_INCLUDE := /path/to/your/blas # BLAS_LIB := /path/to/your/blas # Homebrew puts openblas in a directory that is not on the standard search path # BLAS_INCLUDE := $(shell brew --prefix openblas)/include # BLAS_LIB := $(shell brew --prefix openblas)/lib # This is required only if you will compile the matlab interface. # MATLAB directory should contain the mex binary in /bin. # MATLAB_DIR := /usr/local # MATLAB_DIR := /Applications/MATLAB_R2012b.app # NOTE: this is required only if you will compile the python interface. # We need to be able to find Python.h and numpy/arrayobject.h. #PYTHON_INCLUDE := /usr/include/python2.7 #/usr/lib/python2.7/dist-packages/numpy/core/include # Anaconda Python distribution is quite popular. Include path: # Verify anaconda location, sometimes it's in root. ANACONDA_HOME := $(HOME)/anaconda2 PYTHON_INCLUDE := $(ANACONDA_HOME)/include $(ANACONDA_HOME)/include/python2.7 $(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include # We need to be able to find libpythonX.X.so or .dylib. #PYTHON_LIB := /usr/lib PYTHON_LIB := $(ANACONDA_HOME)/lib # Homebrew installs numpy in a non standard path (keg only) # PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include # PYTHON_LIB += $(shell brew --prefix numpy)/lib # Uncomment to support layers written in Python (will link against Python libs) WITH_PYTHON_LAYER := 1 # Whatever else you find you need goes here. INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib # If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies # INCLUDE_DIRS += $(shell brew --prefix)/include # LIBRARY_DIRS += $(shell brew --prefix)/lib # Uncomment to use `pkg-config` to specify OpenCV library paths. # (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.) # USE_PKG_CONFIG := 1 BUILD_DIR := build DISTRIBUTE_DIR := distribute # Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171 # DEBUG := 1 # The ID of the GPU that 'make runtest' will use to run unit tests. TEST_GPUID := 0 # enable pretty build (comment to see full commands) Q ?= @