高通QMI协议

QMI(Qualcomm MSM Interface,官方名称应该是Qualcomm Message Interface)是高通用来替代OneRPC/DM的协议,用来与modem通信。

QMI协议定义了多个服务: DMS(设备管理Device Management) 提供载入 设备信息的功能 NAS(网络访问Network Access)提供欧冠你注册网络的动作 WDS(数据连接) PDS(GPS定位报告) UIM(管理User Identity Module) CTL(控制服务:用户发起其他服务请求前,必须先申请 ClientID, 这个ID就是由控制服务分配的, 这个服务永远在线)

协议里的每个服务都定义了 请求和响应 (也叫做 Indication) 每个请求响应都有一个匹配的ID,这样用户可以一次发出多个请求。并且响应也不必严格按照请求的顺序进行回应。

Indication作为主动提供的消息, 要么发送给某个特定的客户端, 要么是广播消息(广播给所有使用这个服务的客户)。 通常情况下,用户需要通过一些请求/响应 来打开indication

协议中的每条消息都定义了一系列输入(在请求中才有输入)参数,或者输出(在响应或者indications中才有输出)参数。 这些参数,我们命名为TLV

QMI协议可以通过Linux kernels (>= 3.4)来访问。载入cdc-wdm和qmi_wwan之后即可

$ lsmod
...
qmi_wwan               20971  0
cdc_wdm                17427  1 qmi_wwan
...
usbnet                 30844  3 rndis_host,qmi_wwan,cdc_ether
usbcore               195340  14 rndis_host,rt2x00usb,usb_storage,rt2800usb,ehci_hcd,ehci_pci,qmi_wwan,usbhid,usbnet,cdc_wdm,xhci_hcd,cdc_ether

https://packages.debian.org/sid/libqmi-glib1 (/usr/lib/x86_64-linux-gnu/libqmi-glib.so.1) https://packages.debian.org/jessie/libqmi-utils (/usr/bin/qmi-network) (/usr/bin/qmicli) https://packages.debian.org/sid/libqmi-glib-dev

设置适当的usb模式

# setprop sys.usb.config diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb

在PC上可以看到

$ ls -la /dev/cdc*
crw------- 1 root root 180, 0 10月 12 20:29 /dev/cdc-wdm0

演示

# qmicli -d /dev/cdc-wdm0 --dms-get-revision
[/dev/cdc-wdm0] Device revision retrieved:
	Revision: 'M8626A-AAAANAZM-1.1.00759  1  [Dec 31 2013 03:00:00]'



# qmicli -d /dev/cdc-wdm0 --dms-uim-get-imsi
[/dev/cdc-wdm0] UIM IMSI retrieved:
	IMSI: '204043154974997'



# qmicli -d /dev/cdc-wdm0 --dms-uim-get-iccid
[/dev/cdc-wdm0] UIM ICCID retrieved:
	ICCID: '89860313100205205744'


# qmicli -d /dev/cdc-wdm0 --dms-get-capabilities
[/dev/cdc-wdm0] Device capabilities retrieved:
	Max TX channel rate: '1800000'
	Max RX channel rate: '3100000'
	       Data Service: 'non-simultaneous-cs-ps'
	                SIM: 'supported'
	           Networks: 'cdma20001x, evdo, gsm'


# qmicli -d /dev/cdc-wdm0 --dms-get-ids
[/dev/cdc-wdm0] Device IDs retrieved:
	 ESN: 'C33BA980'
	IMEI: '355991020927480'
	MEID: 'A1000051CA0BE1'


# qmicli -d /dev/cdc-wdm0 --dms-get-band-capabilities
[/dev/cdc-wdm0] Device band capabilities retrieved:
	Bands: 'bc-0-a-system, bc-0-b-system, gsm-dcs-1800, gsm-900-extended, gsm-850, gsm-pcs-1900'
	LTE bands: '(null)'




v# qmicli -d /dev/cdc-wdm0 --nas-get-system-selection-preference
[/dev/cdc-wdm0] Successfully got system selection preference
	Emergency mode: 'no'
	Mode preference: 'cdma-1x, cdma-1xevdo, gsm'
	Band preference: 'bc-0-a-system, bc-0-b-system, bc-1-all-blocks, bc-2, bc-3-a-system, bc-4-all-blocks, bc-5-all-blocks, gsm-dcs-1800, gsm-900-extended, gsm-900-primary, bc-6, bc-7, bc-8, bc-9, bc-10, bc-11, gsm-450, gsm-480, gsm-750, gsm-850, gsm-900-railways, gsm-pcs-1900, wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800, wcdma-1700-us, wcdma-850-us, wcdma-800, bc-12, bc-14, wcdma-2600, wcdma-900, wcdma-1700-japan, bc-16, bc-17, bc-18, bc-19'
	LTE band preference: '(null)'
	TD-SCDMA band preference: 'a, b, c, d, e, f'
	CDMA PRL preference: 'any'
	Roaming preference: 'any'
	Network selection preference: 'automatic'
	Service domain preference: 'cs-ps'
	Service selection preference: 'wcdma'



代码  http://cgit.freedesktop.org/libqmi

详细调试信息

v# qmicli -d /dev/cdc-wdm0 -v  --dms-get-ids
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Opening device with flags 'none'...
[12 10月 2014, 20:55:31] [Debug] QMI Device at '/dev/cdc-wdm0' ready
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Assuming service 'dms' is supported...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Allocating new client ID...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 16
<<<<<<   data   = 01:0F:00:00:00:00:00:01:22:00:04:00:01:01:00:02

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 15
<<<<<<   flags   = 0x00
<<<<<<   service = "ctl"
<<<<<<   client  = 0
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 1
<<<<<<   tlv_length  = 4
<<<<<<   message     = "Allocate CID" (0x0022)
<<<<<< TLV:
<<<<<<   type       = "Service" (0x01)
<<<<<<   length     = 1
<<<<<<   value      = 02
<<<<<<   translated = dms

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 24
>>>>>>   data   = 01:17:00:80:00:00:01:01:22:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 23
>>>>>>   flags   = 0x80
>>>>>>   service = "ctl"
>>>>>>   client  = 0
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 1
>>>>>>   tlv_length  = 12
>>>>>>   message     = "Allocate CID" (0x0022)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Allocation Info" (0x01)
>>>>>>   length     = 2
>>>>>>   value      = 02:03
>>>>>>   translated = [ service = 'dms' cid = '3' ]

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Registered 'dms' (version unknown) client with ID '3'
[12 10月 2014, 20:55:31] [Debug] Asynchronously getting IDs...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 13
<<<<<<   data   = 01:0C:00:00:02:03:00:01:00:25:00:00:00

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 12
<<<<<<   flags   = 0x00
<<<<<<   service = "dms"
<<<<<<   client  = 3
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 1
<<<<<<   tlv_length  = 0
<<<<<<   message     = "Get IDs" (0x0025)

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 66
>>>>>>   data   = 01:41:00:80:02:03:02:01:00:25:00:35:00:02:04:00:00:00:00:00:12:0E:00:41:31:30:30:30:30:35:31:43:41:30:42:45:31:10:08:00:43:33:33:42:41:39:38:30:11:0F:00:33:35:35:39:39:31:30:32:30:39:32:37:34:38:30

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 65
>>>>>>   flags   = 0x80
>>>>>>   service = "dms"
>>>>>>   client  = 3
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 1
>>>>>>   tlv_length  = 53
>>>>>>   message     = "Get IDs" (0x0025)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Meid" (0x12)
>>>>>>   length     = 14
>>>>>>   value      = 41:31:30:30:30:30:35:31:43:41:30:42:45:31
>>>>>>   translated = A1000051CA0BE1
>>>>>> TLV:
>>>>>>   type       = "Esn" (0x10)
>>>>>>   length     = 8
>>>>>>   value      = 43:33:33:42:41:39:38:30
>>>>>>   translated = C33BA980
>>>>>> TLV:
>>>>>>   type       = "Imei" (0x11)
>>>>>>   length     = 15
>>>>>>   value      = 33:35:35:39:39:31:30:32:30:39:32:37:34:38:30
>>>>>>   translated = 355991020927480

[/dev/cdc-wdm0] Device IDs retrieved:
	 ESN: 'C33BA980'
	IMEI: '355991020927480'
	MEID: 'A1000051CA0BE1'
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Releasing 'dms' client with flags 'release-cid'...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Unregistered 'dms' client with ID '3'
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 17
<<<<<<   data   = 01:10:00:00:00:00:00:02:23:00:05:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 16
<<<<<<   flags   = 0x00
<<<<<<   service = "ctl"
<<<<<<   client  = 0
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 2
<<<<<<   tlv_length  = 5
<<<<<<   message     = "Release CID" (0x0023)
<<<<<< TLV:
<<<<<<   type       = "Release Info" (0x01)
<<<<<<   length     = 2
<<<<<<   value      = 02:03
<<<<<<   translated = [ service = 'dms' cid = '3' ]

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 24
>>>>>>   data   = 01:17:00:80:00:00:01:02:23:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 23
>>>>>>   flags   = 0x80
>>>>>>   service = "ctl"
>>>>>>   client  = 0
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 2
>>>>>>   tlv_length  = 12
>>>>>>   message     = "Release CID" (0x0023)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Release Info" (0x01)
>>>>>>   length     = 2
>>>>>>   value      = 02:03
>>>>>>   translated = [ service = 'dms' cid = '3' ]

[12 10月 2014, 20:55:31] [Debug] Client released

参考资料 http://sigquit.wordpress.com/2012/08/20/an-introduction-to-libqmi/ http://www.lanedo.com/users/amorgado/talks/FOSDEM2013%20-%20Mobile%20broadband%20modem%20control%20protocols.pdf http://blogs.gnome.org/dcbw/2010/04/15/mobile-broadband-and-qualcomm-proprietary-protocols/

usb网络接口 ECM: Ethernet Control Model       802.3 ethernet frames 以太网控制模型

NCM: Network Control Model

MBIM协议 (由高通,爱立信,微软等开发, USB论坛发布) 内核驱动是 cdc_mbim (Linux Kernel >= 3.8) 设备是  /dev/cdc-wdm libmbim mbimcli(libmbim-utils)

 mbimcli 
 -d /dev/cdc-wdm1 
 --basic-connect-query-subscriber-ready-status

在ChromiumOS上也实现了部分QMI协议 https://chromium.googlesource.com/chromiumos/platform/libqmi/+/master/src/

原文地址:https://www.cnblogs.com/zxc2man/p/7778058.html