1、生成SSL证书与私钥
Generate Private Key on the Server Running Apache + mod_ssl First, generate a private key on the Linux server that runs Apache webserver using openssl command as shown below.
[root@s4-app-dev jbossuser]# mkdir /etc/httpd/conf/certs
[root@s4-app-dev jbossuser]# openssl genrsa -des3 -out www.xyz.com.key 1024
Generate a Certificate Signing Request (CSR) Using the key generate above, you should generate a certificate request file (csr) using openssl as shown below.
[root@s4-app-dev jbossuser]# openssl req -new -key www.xyz.com.key -out www.xyz.com.csr
Generate a Self-Signed SSL Certificate For testing purpose, you can generate a self-signed SSL certificate that is valid for 1 year using openssl command as shown below.
[root@s4-app-dev jbossuser]# openssl x509 -req -days 365 -in www.xyz.com.csr -signkey www.xyz.com.key -out www.xyz.com.crt
2、去除Apache启动时要求输入密码的提示信息
- 首先备份原始RSA私钥文件，然后再去除RSA私钥文件上的密语保护：
$ cp server.key server.key.org$ openssl rsa -in server.key.org -out server.key - 确保server.key只能被root读取：
$ chmod 400 server.key
3、修改apache httpd.conf文件
# # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo_log" # with ServerRoot set to "/home/oauth/data/opt/jboss/httpd/httpd" will be interpreted by the # server as "/home/oauth/data/opt/jboss/httpd/httpd/logs/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/home/oauth/data/opt/jboss/httpd/httpd" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 172.16.1.224:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_file.so LoadModule authn_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbm.so LoadModule authn_anon_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_anon.so LoadModule authn_dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbd.so LoadModule authn_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_default.so LoadModule authn_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_alias.so LoadModule authz_host_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_host.so LoadModule authz_groupfile_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_groupfile.so LoadModule authz_user_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_user.so LoadModule authz_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_dbm.so LoadModule authz_owner_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_owner.so LoadModule authz_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_default.so LoadModule auth_basic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_basic.so LoadModule auth_digest_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_digest.so LoadModule advertise_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_advertise.so LoadModule file_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_file_cache.so LoadModule cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cache.so LoadModule disk_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_disk_cache.so LoadModule mem_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mem_cache.so LoadModule dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dbd.so LoadModule dumpio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dumpio.so LoadModule reqtimeout_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_reqtimeout.so LoadModule ext_filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ext_filter.so LoadModule include_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_include.so LoadModule filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_filter.so LoadModule substitute_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_substitute.so LoadModule deflate_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_deflate.so LoadModule log_config_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_config.so LoadModule log_forensic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_forensic.so LoadModule logio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_logio.so LoadModule env_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_env.so LoadModule mime_magic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime_magic.so LoadModule cern_meta_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cern_meta.so LoadModule expires_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_expires.so LoadModule headers_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_headers.so LoadModule ident_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ident.so LoadModule usertrack_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_usertrack.so LoadModule unique_id_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_unique_id.so LoadModule setenvif_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_setenvif.so LoadModule version_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_version.so LoadModule proxy_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy.so LoadModule proxy_connect_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_connect.so LoadModule proxy_ftp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ftp.so LoadModule proxy_http_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_http.so LoadModule proxy_scgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_scgi.so LoadModule proxy_ajp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ajp.so LoadModule proxy_cluster_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_cluster.so LoadModule ssl_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ssl.so LoadModule mime_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime.so LoadModule dav_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav.so LoadModule status_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_status.so LoadModule autoindex_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_autoindex.so LoadModule asis_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_asis.so LoadModule info_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_info.so LoadModule suexec_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_suexec.so LoadModule cgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgi.so LoadModule cgid_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgid.so LoadModule jk_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_jk.so LoadModule manager_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_manager.so LoadModule slotmem_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_slotmem.so LoadModule dav_fs_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav_fs.so LoadModule vhost_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_vhost_alias.so LoadModule negotiation_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_negotiation.so LoadModule dir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dir.so LoadModule imagemap_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_imagemap.so LoadModule actions_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_actions.so LoadModule speling_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_speling.so LoadModule userdir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_userdir.so LoadModule alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_alias.so LoadModule rewrite_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_rewrite.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # #ServerAdmin you@example.com # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName 192.168.101.105:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined LogFormat "%h %l %u %t "%r" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or 0 for unlimited # Default setting is to accept 200 Ranges #MaxRanges 0 # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # # MOD_CLUSTER_ADDS # Adjust to you hostname and subnet. <IfModule manager_module> Listen 192.168.101.105:6666 <VirtualHost 192.168.101.105:6666> <Location /> Order deny,allow Deny from all Allow from all </Location>
KeepAlive on KeepAliveTimeout 300 MaxKeepAliveRequests 0 #ServerAdvertise on http://192.168.101.105:6666 ServerAdvertise on AdvertiseFrequency 5 #AdvertiseSecurityKey cnta.gov.cn #AdvertiseGroup @ADVIP@:23364 ManagerBalancerName modcluster EnableMCPMReceive AllowDisplay On <Location /mod_cluster_manager> SetHandler mod_cluster-manager Order deny,allow Deny from all Allow from all </Location> </VirtualHost> ProxyRequests Off
ProxyPass / balancer://modcluster/
ProxyPassReverse / balancer://modcluster/ </IfModule>
4、修改apache httpd-ssl.conf文件
# # This is the Apache server configuration file providing SSL support. # It contains the configuration directives to instruct the server how to # serve pages over an https connection. For detailing information about these # directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html> # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # # Pseudo Random Number Generator (PRNG): # Configure one or more sources to seed the PRNG of the SSL library. # The seed data should be of good random quality. # WARNING! On some platforms /dev/random blocks if not enough entropy # is available. This means you then cannot use the /dev/random device # because it would lead to very long connection times (as long as # it requires to make more entropy available). But usually those # platforms additionally provide a /dev/urandom device which doesn't # block. So, if available, use this one instead. Read the mod_ssl User # Manual for more details. # #SSLRandomSeed startup file:/dev/random 512 #SSLRandomSeed startup file:/dev/urandom 512 #SSLRandomSeed connect file:/dev/random 512 #SSLRandomSeed connect file:/dev/urandom 512 # # When we also provide SSL we have to listen to the # standard HTTP port (see above) and to the HTTPS port # # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # Listen 443 ## ## SSL Global Context ## ## All SSL configuration in this context applies both to ## the main server and all SSL-enabled virtual hosts. ## # # Some MIME-types for downloading Certificates and CRLs # AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl # Pass Phrase Dialog: # Configure the pass phrase gathering process. # The filtering dialog program (`builtin' is a internal # terminal dialog) has to provide the pass phrase on stdout. #SSLPassPhraseDialog builtin # Inter-Process Session Cache: # Configure the SSL Session Cache: First the mechanism # to use and second the expiring timeout (in seconds). #SSLSessionCache "dbm:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache" SSLSessionCache "shmcb:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache(512000)" SSLSessionCacheTimeout 600 # Semaphore: # Configure the path to the mutual exclusion semaphore the # SSL engine uses internally for inter-process synchronization. SSLMutex "file:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_mutex" SSLCryptoDevice builtin ## ## SSL Virtual Host Context ## <VirtualHost _default_:443> # General setup for the virtual host #DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs" ServerName 192.168.101.105:443 #ServerAdmin you@example.com ErrorLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/error_log" TransferLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/access_log" # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # SSL Protocol support: # List the enable protocol levels with which clients will be able to # connect. Disable SSLv2 access by default: SSLProtocol all -SSLv2 # SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. # See the mod_ssl documentation for a complete list. #SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCipherSuite ALL # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. Keep # in mind that if you have both an RSA and a DSA certificate you # can configure both in parallel (to also allow the use of DSA # ciphers, etc.) SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt" #SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.crt" # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. Keep in mind that if # you've both a RSA and a DSA private key you can configure # both in parallel (to also allow the use of DSA ciphers, etc.) SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-private.key" #SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.key" # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. SSLCertificateChainFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt" # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt" #SSLCACertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt/ca-bundle.crt" # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl" #SSLCARevocationFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl/ca-bundle.crl" # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) # or %{REMOTE_ADDR} =~ m/^192.76.162.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch ".(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin"> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 # Per-Server Logging: # The home of a custom SSL log file. Use this when you want a # compact non-error SSL logfile on a virtual host basis. CustomLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_request_log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x "%r" %b" </VirtualHost>
5、修改（jboss-eap-6.3）domain.xml文件
<subsystem xmlns="urn:jboss:domain:web:2.1" default-virtual-server="default-host" native="false" instance-id="${jboss.node.name}"> <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/> <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/> <virtual-server name="default-host" enable-welcome-root="true"> <alias name="localhost"/> <alias name="example.com"/> </virtual-server> </subsystem>
<subsystem xmlns="urn:jboss:domain:modcluster:1.2"> <mod-cluster-config advertise-socket="modcluster" connector="ajp" proxy-list="1.1.1.1:6666" sticky-session="false" sticky-session-force="false"> <dynamic-load-provider> <load-metric type="busyness"/> </dynamic-load-provider> </mod-cluster-config> </subsystem>