声明:以下主要内容参考自: 关于struct device_driver结构中的probe探测函数的调用 http://blog.chinaunix.net/u2/71164/showart.php?id=1361188 用SourceInsight跟踪: 从driver_register看起,此处我的这里是: int driver_register(struct device_driver * drv) { if ((drv->bus->probe && drv->probe) || (drv->bus->remove && drv->remove) || (drv->bus->shutdown && drv->shutdown)) { printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name); } klist_init(&drv->klist_devices, NULL, NULL); return bus_add_driver(drv); } klist_init不相关,不用管他,具体再去看bus_add_driver: int bus_add_driver(struct device_driver *drv) { 1.先kobject_set_name(&drv->kobj, "%s", drv->name); 2.再kobject_register(&drv->kobj) 3.然后调用了:driver_attach(drv) } int driver_attach(struct device_driver * drv) { return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach); } 真正起作用的是__driver_attach: static int __driver_attach(struct device * dev, void * data) { 。。。 if (!dev->driver) driver_probe_device(drv, dev); 。。。 } int driver_probe_device(struct device_driver * drv, struct device * dev) { 。。。 //1.先是判断bus是否match: if (drv->bus->match && !drv->bus->match(dev, drv)) goto done; //2.再具体执行probe: ret = really_probe(dev, drv); 。。。 } really_probe才是我们要找的函数: static int really_probe(struct device *dev, struct device_driver *drv) { 。。。 //1.先是调用的驱动所属总线的probe函数: if (dev->bus->probe) { ret = dev->bus->probe(dev); if (ret) goto probe_failed; } else if (drv->probe) { //2.再调用你的驱动中的probe函数: ret = drv->probe(dev); if (ret) goto probe_failed; } 。。。 } 其中,drv->probe(dev),才是真正调用你的驱动实现的具体的probe函数。 也就是对应此文标题所问的,probe函数此时被调用。