近期在做uboot中nand启动相关的工作。遇到一个问题一直纠结着。
如今最终明确了这个问题，想想还有好多兄弟在某个黑暗的角落里或者某台电脑前纠结着呢，所以赶紧写下来以供查阅。
uboot version 2014.4
/* Architecture-specific global data */
struct arch_global_data {
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
#ifdef CONFIG_AT91FAMILY
/* "static data" needed by at91's clock.c */
unsigned long
cpu_clk_rate_hz;
unsigned long
main_clk_rate_hz;
unsigned long
mck_rate_hz;
unsigned long
plla_rate_hz;
unsigned long
pllb_rate_hz;
unsigned long
at91_pllb_usb_init;
#endif
/* "static data" needed by most of timer.c on ARM platforms */
unsigned long timer_rate_hz;
unsigned long tbu;
unsigned long tbl;
unsigned long lastinc;
unsigned long long timer_reset_value;
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
unsigned long tlb_addr;
unsigned long tlb_size;
#endif
#ifdef CONFIG_OMAP
struct omap_boot_parameters omap_boot_params;
#endif
};
#include <asm-generic/global_data.h>
#ifdef CONFIG_ARM64
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18")
#else
#define DECLARE_GLOBAL_DATA_PTR
register volatile gd_t *gd asm ("r9")
#endif
从这里看到了gd的定义，而且能够知道气质这个结构体的定义是在：#include <asm-generic/global_data.h>这个文件夹下。
那么就去这个文件夹下加入一个私有变量使得在兴许的使用过程中更加方便吧！！
！！！
！！！
！。！
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned int baudrate;
unsigned long cpu_clk;
/* CPU clock in Hz! */
unsigned long bus_clk;
/* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
unsigned long pci_clk;
unsigned long mem_clk;
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
unsigned long fb_base;
/* Base address of framebuffer mem */
#endif
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
unsigned long post_log_word; /* Record POST activities */
unsigned long post_log_res; /* success of POST test */
unsigned long post_init_f_time; /* When post_init_f started */
#endif
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
#endif
unsigned long have_console;
/* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx;
/* Pre-Console buffer index */
#endif
#ifdef CONFIG_MODEM_SUPPORT
unsigned long do_mdm_init;
unsigned long be_quiet;
#endif
unsigned long env_addr;
/* Address of Environment struct */
unsigned long env_valid;
/* Checksum of Environment valid? */
unsigned long ram_top;
/* Top address of RAM used by U-Boot */
unsigned long relocaddr;
/* Start address of U-Boot in RAM */
phys_size_t ram_size;
/* RAM size */
unsigned long mon_len;
/* monitor len */
unsigned long irq_sp;
/* irq stack pointer */
unsigned long start_addr_sp;
/* start_addr_stackpointer */
unsigned long reloc_off;
struct global_data *new_gd;
/* relocated global data */
#ifdef CONFIG_DM
struct device
*dm_root; /* Root instance for Driver Model */
struct list_head uclass_root;
/* Head of core tree */
#endif
const void *fdt_blob;
/* Our device tree, NULL if none */
void *new_fdt;
/* Relocated FDT */
unsigned long fdt_size;
/* Space reserved for relocated FDT */
void **jt;
/* jump table */
char env_buf[32];
/* buffer for getenv() before reloc. */
#ifdef CONFIG_TRACE
void *trace_buff;
/* The trace buffer */
#endif
#if defined(CONFIG_SYS_I2C)
int cur_i2c_bus;
/* current used i2c bus */
#endif
unsigned long timebase_h;
unsigned long timebase_l;
struct arch_global_data arch;
/* architecture-specific data */
#ifdef CONFIG_xxxxx //此处随便x
void *priv;
/* point to the private data */
#endif
} gd_t;
在使用的过程中包括头文件。就能够使用了。