查看管理结点mgt的网卡信息，为mgt设置VIP
[root@mgt ~]# ifconfig eth0 Link encap:Ethernet HWaddr 5C:F3:FC:E9:61:78 inet addr:192.168.253.100 Bcast:192.168.253.255 Mask:255.255.255.0 inet6 addr: 2001:cc0:2034:253:5ef3:fcff:fee9:6178/64 Scope:Global inet6 addr: fe80::5ef3:fcff:fee9:6178/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19849 errors:0 dropped:0 overruns:0 frame:0 TX packets:8129 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2010431 (1.9 MiB) TX bytes:4288209 (4.0 MiB) Interrupt:28 Memory:92000000-92012800 eth1 Link encap:Ethernet HWaddr 5C:F3:FC:E9:61:7A inet addr:172.20.0.1 Bcast:172.20.0.255 Mask:255.255.255.0 inet6 addr: 2001:cc0:2034:253:5ef3:fcff:fee9:617a/64 Scope:Global inet6 addr: fe80::5ef3:fcff:fee9:617a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17998 errors:0 dropped:0 overruns:0 frame:0 TX packets:21715 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1596283 (1.5 MiB) TX bytes:12926260 (12.3 MiB) Interrupt:40 Memory:94000000-94012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5798104 errors:0 dropped:0 overruns:0 frame:0 TX packets:5798104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:803149634 (765.9 MiB) TX bytes:803149634 (765.9 MiB)
发现mgt结点有2块网卡，eth0配置了外部IP，供其与局域网内部其他机器访问通信，eth01配置了内部IP，供其与各个计算节点之间访问通信。现在需要把mgt结点作为LVS的DirectorServer，需要在其上设置虚拟IP（VIP）。备注：若需要修改eth0的IP地址，可执行下面的命令（其他网卡参数修改类似）：
[root@mgt ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0
（1）新建directorserver.sh脚本，代码如下：
#!/bin/bash setenforce 0 VIP=192.168.253.110 /sbin/ifconfig eth0:0 192.168.253.110 broadcast 192.168.253.110 netmask 255.255.255.255 up /sbin/route add -host 192.168.253.110 dev eth0:0 sysctl -p
此时再次查看网卡信息，除了已有的eth0、eth1和lo之外，新增了eth0:0，即为虚拟IP地址：
[root@mgt zmq]# ifconfig eth0:0 Link encap:Ethernet HWaddr 5C:F3:FC:E9:61:78 inet addr:192.168.253.110 Bcast:192.168.253.110 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:28 Memory:92000000-92012800
查看其路由表，发现新增了一条192.168.253.110在eth0设备上的理由转发规则：
[root@mgt zmq]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.253.110 * 255.255.255.255 UH 0 0 0 eth0 //新增 172.20.0.0 * 255.255.255.0 U 0 0 0 eth1 192.168.253.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1003 0 0 eth0 link-local * 255.255.0.0 U 1004 0 0 eth1 default 192.168.253.254 0.0.0.0 UG 0 0 0 eth0
在director server结点上开启包转发功能：
[root@mgt zmq]# echo "1" >/proc/sys/net/ipv4/ip_forward
（2）在计算节点上设置VIP，计算节点为集群的realserver，绑定在每个节点的回环地址上。以node01为例：
[root@node01 ~]# ifconfig //设备eth0绑定了外部IP
eth0 Link encap:Ethernet HWaddr 5C:F3:FC:E9:64:78 inet addr:192.168.253.101 Bcast:192.168.253.255 Mask:255.255.255.0 inet6 addr: 2001:cc0:2034:253:5ef3:fcff:fee9:6478/64 Scope:Global inet6 addr: fe80::5ef3:fcff:fee9:6478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:102834 errors:0 dropped:0 overruns:0 frame:0 TX packets:111724 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44921980 (42.8 MiB) TX bytes:10122764 (9.6 MiB) Interrupt:28 Memory:92000000-92012800 //虚拟网卡eth0:0绑定了内部IP eth0:0 Link encap:Ethernet HWaddr 5C:F3:FC:E9:64:78 inet addr:172.20.0.11 Bcast:172.20.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:28 Memory:92000000-92012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5359 errors:0 dropped:0 overruns:0 frame:0 TX packets:5359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:348956 (340.7 KiB) TX bytes:348956 (340.7 KiB)
执行脚本realserver.sh，脚本内容如下：
#!/bin/bash setenforce 0 VIP=192.168.253.110 /sbin/ifconfig lo:0 192.168.253.110 broadcast 192.168.253.110 netmask 255.255.255.255 up /sbin/route add -host 192.168.253.110 dev lo:0 echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce sysctl -p
[root@node01 zmq]# ./realserver.sh setenforce: SELinux is disabled net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296
再次查看网卡信息：
[root@node01 zmq]# ifconfig //新增了一条记录 lo:0 Link encap:Local Loopback inet addr:192.168.253.110 Mask:255.255.255.255 UP LOOPBACK RUNNING MTU:16436 Metric:1
在每个计算节点上执行上述过程。注意：上述配置在每次重启network服务（命令：service network restart）后会失效。
（3）配置director server，执行脚本ipvsadm.sh，其内容为：
#/bin/hash op=$1 MAP_PORT=9527 WEB_PORT=8080 AL_PORT=35569 TEST_PORT=80 LVS_SERVER_VIP=192.168.253.110 MODE=wrr hosts=(192.168.253.101 192.168.253.102 192.168.253.103 192.168.253.104 192.168.253.105) WMap=(100 100 100 80 80) WWeb=(100 100 100 80 80) WAl=(100 100 100 80 80) WTest=(1 1 1 1 1) ipvsadm -C ipvsadm -A -t ${LVS_SERVER_VIP}:${MAP_PORT} -s ${MODE} ipvsadm -A -t ${LVS_SERVER_VIP}:${WEB_PORT} -s ${MODE} ipvsadm -A -t ${LVS_SERVER_VIP}:${AL_PORT} -s ${MODE} if [ "$op" == test ]; then ipvsadm -A -t ${LVS_SERVER_VIP}:${TEST_PORT} -s ${MODE} fi i=0 while [ $i -lt ${#hosts[@]} ]; do ipvsadm -a -t ${LVS_SERVER_VIP}:${MAP_PORT} -r ${hosts[$i]}:${MAP_PORT} -w ${WMap[$i]} -g ipvsadm -a -t ${LVS_SERVER_VIP}:${WEB_PORT} -r ${hosts[$i]}:${WEB_PORT} -w ${WWeb[$i]} -g ipvsadm -a -t ${LVS_SERVER_VIP}:${AL_PORT} -r ${hosts[$i]}:${AL_PORT} -w ${WAl[$i]} -g if [ "$op" == test ]; then ipvsadm -a -t ${LVS_SERVER_VIP}:${TEST_PORT} -r ${hosts[$i]}:${TEST_PORT} -w ${WTest[$i]} -g fi i=$(( $i + 1)) done ipvsadm -Ln
可以看到：
[root@mgt zmq]# ./ipvsadm.sh IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 192.168.253.110:8080 wrr -> 192.168.253.101:8080 Route 100 0 0 -> 192.168.253.102:8080 Route 100 0 0 -> 192.168.253.103:8080 Route 100 0 0 -> 192.168.253.104:8080 Route 80 0 0 -> 192.168.253.105:8080 Route 80 0 0 TCP 192.168.253.110:9527 wrr -> 192.168.253.101:9527 Route 100 0 0 -> 192.168.253.102:9527 Route 100 0 0 -> 192.168.253.103:9527 Route 100 0 0 -> 192.168.253.104:9527 Route 80 0 0 -> 192.168.253.105:9527 Route 80 0 0 TCP 192.168.253.110:35569 wrr -> 192.168.253.101:35569 Route 100 0 0 -> 192.168.253.102:35569 Route 100 0 0 -> 192.168.253.103:35569 Route 100 0 0 -> 192.168.253.104:35569 Route 80 0 0 -> 192.168.253.105:35569 Route 80 0 0
(4)执行脚本lvsstatus.sh，可查看LVS转发状态，脚本为：
#!/bin/bash echo "geohpc" | /usr/bin/sudo -S ipvsadm -L
结果如下图（共分发了1个绘图请求-端口9527，5个算法计算请求-端口35569）：
