之前在看android启动过程总是带着完成工作任务的目的去分析代码，但是对于一些代码的细节并不是很清楚，在这里就分析一下Init进程的执行过程。
Init进程是android系统起来之后启动的第一个进程，对于研究android系统的启动过程很重要。
直接根据代码来分析整个进程的执行过程。
int main(int argc, char **argv)
{
int fd_count = 0;
struct pollfd ufds[4];//存放pollfd
char *tmpdev;
char* debuggable;
char tmp[32];
int property_set_fd_init = 0;
int signal_fd_init = 0;
int keychord_fd_init = 0;
if (!strcmp(basename(argv[0]), "ueventd"))
return ueventd_main(argc, argv);//ueventd是init的软链接，执行这个进程的时候相当于执行init进程，然后根据进程名进入相应的执行流程
/* clear the umask */
umask(0);
/* Get the basic filesystem setup we need put
* together in the initramdisk on / and then we'll
* let the rc file figure out the rest.
*/
mkdir("/dev", 0755);//创建一些必要的目录并分配权限
mkdir("/proc", 0755);
mkdir("/sys", 0755);
mount("tmpfs", "/dev", "tmpfs", 0, "mode=0755");
mkdir("/dev/pts", 0755);
mkdir("/dev/socket", 0755);
mount("devpts", "/dev/pts", "devpts", 0, NULL);
mount("proc", "/proc", "proc", 0, NULL);
mount("sysfs", "/sys", "sysfs", 0, NULL);
/* We must have some place other than / to create the
* device nodes for kmsg and null, otherwise we won't
* be able to remount / read-only later on.
* Now that tmpfs is mounted on /dev, we can actually
* talk to the outside world.
*/
以上部分不是比较浅显，不是分析的重点
open_devnull_stdio();//重定向标准输入，输入，错误到/dev/__null__(dup2复制文件句柄，0,1,2分别代表标准输入 输出 错误)
log_init();//设置log信息输出设备/dev/__kmsg__,unlink之后其他进程无法访问
INFO("reading config file\n");
init_parse_config_file("/init.rc");//分析配置文件
/* pull the kernel commandline and ramdisk properties file in */
import_kernel_cmdline(0);
这里导入相应的处理函数，分析执行过程
static void import_kernel_cmdline(int in_qemu)
{
char cmdline[1024];
char *ptr;
int fd;
fd = open("/proc/cmdline", O_RDONLY);
if (fd >= 0) {
int n = read(fd, cmdline, 1023);
if (n < 0) n = 0;
/* get rid of trailing newline, it happens */
if (n > 0 && cmdline[n-1] == '\n') n--;
//读取/proc/cmdline中的信息，存放在cmdline字符数组并进行处理
cmdline[n] = 0;
close(fd);
} else {
cmdline[0] = 0;
}
ptr = cmdline;
while (ptr && *ptr) {
char *x = strchr(ptr, ' ');
if (x != 0) *x++ = 0;
import_kernel_nv(ptr, in_qemu);//根据' '间断符逐行分析文本
ptr = x;
}
/* don't expose the raw commandline to nonpriv processes */
chmod("/proc/cmdline", 0440);
}
static void import_kernel_nv(char *name, int in_qemu)
{
char *value = strchr(name, '=');
if (value == 0) {
if (!strcmp(name, "calibration"))
calibration = 1;//表示要校准还是什么？
return;
}
*value++ = 0;
if (*name == 0) return;
if (!in_qemu)
{
/* on a real device, white-list the kernel options */
if (!strcmp(name,"qemu")) {
strlcpy(qemu, value, sizeof(qemu));
} else if (!strcmp(name,"androidboot.console")) {
strlcpy(console, value, sizeof(console));
} else if (!strcmp(name,"androidboot.mode")) {
strlcpy(bootmode, value, sizeof(bootmode));//启动模式
} else if (!strcmp(name,"androidboot.serialno")) {
strlcpy(serialno, value, sizeof(serialno));
} else if (!strcmp(name,"androidboot.baseband")) {
strlcpy(baseband, value, sizeof(baseband));//基带
} else if (!strcmp(name,"androidboot.carrier")) {
strlcpy(carrier, value, sizeof(carrier));
} else if (!strcmp(name,"androidboot.bootloader")) {
strlcpy(bootloader, value, sizeof(bootloader));
} else if (!strcmp(name,"androidboot.hardware")) {
strlcpy(hardware, value, sizeof(hardware));
}//将以上设备信息存放在定义的字符数组中
} else {
/* in the emulator, export any kernel option with the
* ro.kernel. prefix */
char buff[32];
int len = snprintf( buff, sizeof(buff), "ro.kernel.%s", name );
if (len < (int)sizeof(buff)) {
property_set( buff, value );
}
}
}
get_hardware_name(hardware, &revision);
snprintf(tmp, sizeof(tmp), "/init.%s.rc", hardware);
init_parse_config_file(tmp);//分析相应硬件版本的rc文件
init.rc文件有自己相应的语法，分析rc文件也是根据对应的语法来分析，这里引入一片简单介绍init.rc语法的文章
int init_parse_config_file(const char *fn)
{
char *data;
data = read_file(fn, 0);//这里通过read_file函数将fn文件中的数据全部读取到字符数组中，malloc分配空间
if (!data) return -1;
//这里开始真正分析脚本中的命令
parse_config(fn, data);
DUMP();
return 0;
}
static void parse_config(const char *fn, char *s)
{
struct parse_state state;
char *args[INIT_PARSER_MAXARGS];//允许解析出来的命令行最多有64个参数
int nargs;
nargs = 0;
state.filename = fn;
state.line = 1;
state.ptr = s;
state.nexttoken = 0;
state.parse_line = parse_line_no_op;
for (;;) {
switch (next_token(&state)) {//通过next_token函数来寻找字符数组中的关键标记
//这里面省略了一些字符的处理(如‘\r’, '\t', '"', ' '等)，只针对有效字符进行处理('\0', '\n'等)
//#define T_EOF 0 #define T_TEXT 1 #define T_NEWLINE 2
case T_EOF:
state.parse_line(&state, 0, 0);
return;
case T_NEWLINE:
if (nargs) {
int kw = lookup_keyword(args[0]);//这里将分析第一个参数所代表的关键字
//根据字符匹配返回已定义好的宏定义
if (kw_is(kw, SECTION)) {//当关键字是on或service
state.parse_line(&state, 0, 0);
parse_new_section(&state, kw, nargs, args);//对state.parse_line进行赋值
//这里表示的是一段新的SECTION，此时会在action或这service双向链表中加入新的结点
//首先是将action或者service加入到相应的链表尾部
} else {
state.parse_line(&state, nargs, args);
//如果是command，将这些cmamand加入到所属的action链表的尾部
}
nargs = 0;
}
break;
case T_TEXT:
if (nargs < INIT_PARSER_MAXARGS) {
args[nargs++] = state.text;
}
break;
}
}
}
宏定义如下：
enum {
K_UNKNOWN,
#endif
KEYWORD(capability, OPTION, 0, 0)
KEYWORD(chdir, COMMAND, 1, do_chdir)
KEYWORD(chroot, COMMAND, 1, do_chroot)
KEYWORD(class, OPTION, 0, 0)
KEYWORD(class_start, COMMAND, 1, do_class_start)
KEYWORD(class_stop, COMMAND, 1, do_class_stop)
KEYWORD(class_reset, COMMAND, 1, do_class_reset)
KEYWORD(console, OPTION, 0, 0)
KEYWORD(critical, OPTION, 0, 0)
KEYWORD(disabled, OPTION, 0, 0)
KEYWORD(domainname, COMMAND, 1, do_domainname)
KEYWORD(exec, COMMAND, 1, do_exec)
KEYWORD(export, COMMAND, 2, do_export)
KEYWORD(group, OPTION, 0, 0)
KEYWORD(hostname, COMMAND, 1, do_hostname)
KEYWORD(ifup, COMMAND, 1, do_ifup)
KEYWORD(insmod, COMMAND, 1, do_insmod)
KEYWORD(import, SECTION, 1, 0)
KEYWORD(keycodes, OPTION, 0, 0)
KEYWORD(mkdir, COMMAND, 1, do_mkdir)
KEYWORD(mount, COMMAND, 3, do_mount)
KEYWORD(on, SECTION, 0, 0)
KEYWORD(oneshot, OPTION, 0, 0)
KEYWORD(onrestart, OPTION, 0, 0)
KEYWORD(restart, COMMAND, 1, do_restart)
KEYWORD(rm, COMMAND, 1, do_rm)
KEYWORD(rmdir, COMMAND, 1, do_rmdir)
KEYWORD(service, SECTION, 0, 0)
KEYWORD(setenv, OPTION, 2, 0)
KEYWORD(setkey, COMMAND, 0, do_setkey)
KEYWORD(setprop, COMMAND, 2, do_setprop)
KEYWORD(setrlimit, COMMAND, 3, do_setrlimit)
KEYWORD(socket, OPTION, 0, 0)
KEYWORD(start, COMMAND, 1, do_start)
KEYWORD(stop, COMMAND, 1, do_stop)
KEYWORD(trigger, COMMAND, 1, do_trigger)
KEYWORD(symlink, COMMAND, 1, do_symlink)
KEYWORD(sysclktz, COMMAND, 1, do_sysclktz)
KEYWORD(user, OPTION, 0, 0)
KEYWORD(wait, COMMAND, 1, do_wait)
KEYWORD(write, COMMAND, 2, do_write)
KEYWORD(copy, COMMAND, 2, do_copy)
KEYWORD(chown, COMMAND, 2, do_chown)
KEYWORD(chmod, COMMAND, 2, do_chmod)
KEYWORD(loglevel, COMMAND, 1, do_loglevel)
KEYWORD(load_persist_props, COMMAND, 0, do_load_persist_props)
KEYWORD(ioprio, OPTION, 0, 0)
#ifdef __MAKE_KEYWORD_ENUM__
KEYWORD_COUNT,
};
这里还涉及到一些结构体Action及对应的Command，Service也是如此
struct command
{
/* list of commands in an action */
struct listnode clist;
int (*func)(int nargs, char **args);
int nargs;
char *args[1];
};
struct action {
/* node in list of all actions */
struct listnode alist;
/* node in the queue of pending actions */
struct listnode qlist;
/* node in list of actions for a trigger */
struct listnode tlist;
unsigned hash;
const char *name;
struct listnode commands;
struct command *current;
};
action_for_each_trigger("early-init",action_add_queue_tail);
queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done");
以上两个函数功能其实是一样的，action_for_each_trigger是将action放到即将执行的链表中(确保了执行顺序)，而queue_builtin_action是将action放到整体的链表中
正常的执行顺序是early-init——>init——>early-fs——>fs——>early-boot——>boot
queue_builtin_action(property_init_action, "property_init");
queue_builtin_action(keychord_init_action, "keychord_init");
queue_builtin_action(console_init_action, "console_init");
queue_builtin_action(set_init_properties_action, "set_init_properties");
/* execute all the boot actions to get us started */
action_for_each_trigger("init", action_add_queue_tail);
action_for_each_trigger("early-fs", action_add_queue_tail);
action_for_each_trigger("fs", action_add_queue_tail);
action_for_each_trigger("post-fs", action_add_queue_tail);
queue_builtin_action(property_service_init_action, "property_service_init");
queue_builtin_action(signal_init_action, "signal_init");
queue_builtin_action(check_startup_action, "check_startup");
/* execute all the boot actions to get us started */
action_for_each_trigger("early-boot", action_add_queue_tail);
action_for_each_trigger("boot", action_add_queue_tail);
/* run all property triggers based on current state of the properties */
queue_builtin_action(queue_property_triggers_action, "queue_propety_triggers");
#if BOOTCHART
queue_builtin_action(bootchart_init_action, "bootchart_init");
#endif
以下又是分析的重点
for(;;) {
int nr, i, timeout = -1;
execute_one_command();//从链表中取出结点相应执行然后remove
//分析过这个函数，在这里还有个疑问，该函数都是从action队列中去结点执行，但是系统的service是怎么执行的
//难道service链表不可能只注册不执行
//这里注意on boot section中最后一个command(class_start default),最终调用do_class_start
int do_class_start(int nargs, char **args)
{
/* Starting a class does not start services
* which are explicitly disabled. They must
* be started individually.
*/
service_for_each_class(args[1], service_start_if_not_disabled);
return 0;
}
执行service_list中的结点
void service_for_each_class(const char *classname,
void (*func)(struct service *svc))
{
struct listnode *node;
struct service *svc;
list_for_each(node, &service_list) {
svc = node_to_item(node, struct service, slist);
if (!strcmp(svc->classname, classname)) {
func(svc);
}
}
}
这里就将链表中的所有结点都执行完毕，over
#define list_for_each(node, list) \
for (node = (list)->next; node != (list); node = node->next)
restart_processes();//判断是否有进程需要重启
if (!property_set_fd_init && get_property_set_fd() > 0) {//系统属性
ufds[fd_count].fd = get_property_set_fd();
ufds[fd_count].events = POLLIN;
ufds[fd_count].revents = 0;
fd_count++;
property_set_fd_init = 1;
}
if (!signal_fd_init && get_signal_fd() > 0) {//进程间通信
ufds[fd_count].fd = get_signal_fd();
ufds[fd_count].events = POLLIN;
ufds[fd_count].revents = 0;
fd_count++;
signal_fd_init = 1;
}
if (!keychord_fd_init && get_keychord_fd() > 0) {//组合键检测
ufds[fd_count].fd = get_keychord_fd();
ufds[fd_count].events = POLLIN;
ufds[fd_count].revents = 0;
fd_count++;
keychord_fd_init = 1;
}
if (process_needs_restart) {
timeout = (process_needs_restart - gettime()) * 1000;
if (timeout < 0)
timeout = 0;
}
if (!action_queue_empty() || cur_action)
timeout = 0;
#if BOOTCHART
if (bootchart_count > 0) {
if (timeout < 0 || timeout > BOOTCHART_POLLING_MS)
timeout = BOOTCHART_POLLING_MS;
if (bootchart_step() < 0 || --bootchart_count == 0) {
bootchart_finish();
bootchart_count = 0;
}
}
#endif
nr = poll(ufds, fd_count, timeout);
if (nr <= 0)
continue;
for (i = 0; i < fd_count; i++) {
if (ufds[i].revents == POLLIN) {
if (ufds[i].fd == get_property_set_fd())
handle_property_set_fd();
else if (ufds[i].fd == get_keychord_fd())
handle_keychord();
else if (ufds[i].fd == get_signal_fd())
handle_signal();
}
}
}
return 0;
}