CC3000 Arduino 连接Yeelink中文注释示例

代码如下“

/*************************************************** 
 *这是一个例子的dfrobot维多-无线集成物联网建兴传感器和控制节点
*产品页面及更多信息：http://www.dfrobot.com.cn/goods-997.html
*特别设计的dfrobot维多产品的工作：
*
*图书馆叉从Adafruit
*
*劳伦写的
* BSD许可证，所有以上文字必须包含在任何重
 * 
 ****************************************************/
 
/*
这个例子的代码是用于连接yeelink云服务（官方主页：www.yeelink .net）。
所需的设备只是：
1。LM35温度传感器的低成本或任何你用来上传数据的装置
2。和Wido
注意：请不要忘记在使用前更改下面的设置！
1。wlan_ssid和wlan_pass
2。api_key
三.设备ID和传感器ID

 */


#include <Adafruit_CC3000.h>
#include <ccspi.h>
#include <SPI.h>
#define Wido_IRQ   7
#define Wido_VBAT  5
#define Wido_CS    10

Adafruit_CC3000 Wido = Adafruit_CC3000(Wido_CS, Wido_IRQ, Wido_VBAT,
SPI_CLOCK_DIVIDER); //你可以改变这个时钟速度
// 安全可以wlan_sec_unsec，wlan_sec_wep，wlan_sec_wpa或wlan_sec_wpa2
#define WLAN_SECURITY   WLAN_SEC_WPA2


#define WLAN_SSID       "myNetwork"           // cannot be longer than 32 characters!
#define WLAN_PASS       "myPassword"          // For connecting router or AP, don't forget to set the SSID and password here!!


#define TCP_TIMEOUT      3000
//定义cc3000_tiny_driver

#define WEBSITE  "api.yeelink.net"
#define API_key  "733115abefe88b0033c035ac9e000000"  // Update Your API Key. To get your API Key, please check the link below
                                                     // http://www.yeelink.net/user/user_profile

void setup(){

  Serial.begin(115200);
  Serial.println(F("Hello, CC3000!
"));

  /*初始化模块*/
  Serial.println(F("
Initialising the CC3000 ..."));
  if (!Wido.begin())
  {
    Serial.println(F("无法初始化的CC3000！检查你的线路？"));
    while(1);
  }

  /* 尝试连接到接入点 */
  char *ssid = WLAN_SSID;             /* Max 32 chars */
  Serial.print(F("
Attempting to connect to ")); 
  Serial.println(ssid);

  /* 注意：安全连接在“微”模式下不可用！
默认情况下connecttoap将重试下去，但是你可以通过
最大重试次数可选（大于零）作为第四个参数。
   */
  if (!Wido.connectToAP(WLAN_SSID, WLAN_PASS, WLAN_SECURITY)) {
    Serial.println(F("Failed!"));
    while(1);
  }

  Serial.println(F("Connected!"));

  /*等待DHCP完成 */
  Serial.println(F("Request DHCP"));
  while (!Wido.checkDHCP())
  {
    delay(100); // 每个插入的DHCP：超时！
  }  

}

uint32_t ip = 0;
float temp = 0;

void loop(){
  
  static Adafruit_CC3000_Client WidoClient;
  static unsigned long RetryMillis = 0;
  static unsigned long uploadtStamp = 0;
  static unsigned long sensortStamp = 0;

  if(!WidoClient.connected() && millis() - RetryMillis > TCP_TIMEOUT){
    // Update the time stamp更新时间戳
    RetryMillis = millis();

    Serial.println(F("Try to connect the cloud server"));
    WidoClient.close();

    // Get Yeelink IP address把Yeelink IP的地址
    Serial.print(F("api.yeelink.net -> "));
    while  (ip  ==  0)  {
      if  (!Wido.getHostByName(WEBSITE, &ip))  {    //  Get the server IP address based on the domain name
       //根据域名获取服务器IP地址
        Serial.println(F("Couldn't resolve!"));
      }
      delay(500);
    }  
    Wido.printIPdotsRev(ip);
    Serial.println(F(""));
    
    // Connect to the Yeelink Server连接到服务器的yeelink
    WidoClient = Wido.connectTCP(ip, 80);          // Try to connect cloud server尝试连接云服务器
  }
  
  if(WidoClient.connected() && millis() - uploadtStamp > 2000){
    uploadtStamp = millis();
    // If the device is connected to the cloud server, upload the data every 2000ms.
    //如果设备连接到云服务器，上传数据的每一2000ms。
    // Prepare Http Package for Yeelink & get length
    //准备和包装长度yeelink for HTTP get
    int length = 0;
    char lengthstr[3];
    
    // 创建HTTP数据包
    char httpPackage[60] = "";
    
    strcat(httpPackage,"{"value":");
    itoa(temp,httpPackage+strlen(httpPackage),10);          
    //日期（时间）Push the to the HTTP数据包
    strcat(httpPackage,"}");
    
    length = strlen(httpPackage);                           // get the length of data package
    itoa(length,lengthstr,10);                              // convert int to char array for posting
    Serial.print(F("Length = "));
    Serial.println(length);
    
    Serial.println(F("Connected to Yeelink server."));
    
    // Send headers
    Serial.print(F("Sending headers"));
    
    WidoClient.fastrprint(F("POST /v1.0/device/"));
    WidoClient.fastrprint(F("100/sensor/20/datapoints"));  //Please change your device ID and sensor ID here, after creating
                                                           //Please check the link: http://www.yeelink.net/user/devices
                                                           //The example URL: http://api.yeelink.net/v1.0/device/100/sensor/20/datapoints
    WidoClient.fastrprintln(F(" HTTP/1.1"));
    Serial.print(F("."));
    
    WidoClient.fastrprintln(F("Host: api.yeelink.net"));
    Serial.print(F("."));
    
    WidoClient.fastrprint(F("U-ApiKey: "));
    WidoClient.fastrprintln(API_key);
    Serial.print(F("."));
    
    WidoClient.fastrprint("Content-Length: "); 
    WidoClient.fastrprintln(lengthstr);
    WidoClient.fastrprintln("");
    Serial.print(F("."));
    
    Serial.println(F(" done."));
    
    // Send data
    Serial.print(F("Sending data"));
    WidoClient.fastrprintln(httpPackage);

    Serial.println(F(" done."));
    
    /********** Get the http page feedback ***********/
    
    unsigned long rTimer = millis();
    Serial.println(F("Reading Cloud Response!!!
"));
    while (millis() - rTimer < 2000) {
      while (WidoClient.connected() && WidoClient.available()) {
        char c = WidoClient.read();
        Serial.print(c);
      }
    }
    delay(1000);             // Wait for 1s to finish posting the data stream
    WidoClient.close();      // Close the service connection
  
    RetryMillis = millis();  // Reset the timer stamp for applying the connection with the service
  }

  if(millis() - sensortStamp > 1000){
    sensortStamp = millis();
    // read the LM35 sensor value and convert to the degrees every 100ms.

    int reading = analogRead(0);
    temp = reading *0.0048828125*100;
    Serial.print(F("Real Time Temp: ")); 
    Serial.println(temp); 
  }
}

”

/***************************************************  *这是一个例子的dfrobot维多-无线集成物联网建兴传感器和控制节点*产品页面及更多信息：http://www.dfrobot.com.cn/goods-997.html*特别设计的dfrobot维多产品的工作：**图书馆叉从Adafruit**劳伦写的* BSD许可证，所有以上文字必须包含在任何重 *  ****************************************************/ /*这个例子的代码是用于连接yeelink云服务（官方主页：www.yeelink .net）。所需的设备只是：1。LM35温度传感器的低成本或任何你用来上传数据的装置2。和Wido注意：请不要忘记在使用前更改下面的设置！1。wlan_ssid和wlan_pass2。api_key三.设备ID和传感器ID
*/

#include <Adafruit_CC3000.h>#include <ccspi.h>#include <SPI.h>#define Wido_IRQ 7#define Wido_VBAT 5#define Wido_CS 10
Adafruit_CC3000 Wido = Adafruit_CC3000(Wido_CS, Wido_IRQ, Wido_VBAT,SPI_CLOCK_DIVIDER); //你可以改变这个时钟速度// 安全可以wlan_sec_unsec，wlan_sec_wep，wlan_sec_wpa或wlan_sec_wpa2#define WLAN_SECURITY WLAN_SEC_WPA2

#define WLAN_SSID "myNetwork" // cannot be longer than 32 characters!#define WLAN_PASS "myPassword" // For connecting router or AP, don't forget to set the SSID and password here!!

#define TCP_TIMEOUT 3000//定义cc3000_tiny_driver
#define WEBSITE "api.yeelink.net"#define API_key "733115abefe88b0033c035ac9e000000" // Update Your API Key. To get your API Key, please check the link below // http://www.yeelink.net/user/user_profile
void setup(){
Serial.begin(115200); Serial.println(F("Hello, CC3000! "));
/*初始化模块*/ Serial.println(F(" Initialising the CC3000 ...")); if (!Wido.begin()) { Serial.println(F("无法初始化的CC3000！检查你的线路？")); while(1); }
/* 尝试连接到接入点 */ char *ssid = WLAN_SSID; /* Max 32 chars */ Serial.print(F(" Attempting to connect to "));   Serial.println(ssid);
/* 注意：安全连接在“微”模式下不可用！默认情况下connecttoap将重试下去，但是你可以通过最大重试次数可选（大于零）作为第四个参数。 */ if (!Wido.connectToAP(WLAN_SSID, WLAN_PASS, WLAN_SECURITY)) { Serial.println(F("Failed!")); while(1); }
Serial.println(F("Connected!"));
/*等待DHCP完成 */ Serial.println(F("Request DHCP")); while (!Wido.checkDHCP()) { delay(100); // 每个插入的DHCP：超时！ }
}
uint32_t ip = 0;float temp = 0;
void loop(){    static Adafruit_CC3000_Client WidoClient; static unsigned long RetryMillis = 0; static unsigned long uploadtStamp = 0; static unsigned long sensortStamp = 0;
if(!WidoClient.connected() && millis() - RetryMillis > TCP_TIMEOUT){ // Update the time stamp更新时间戳 RetryMillis = millis();
Serial.println(F("Try to connect the cloud server")); WidoClient.close();
// Get Yeelink IP address把Yeelink IP的地址 Serial.print(F("api.yeelink.net -> ")); while (ip == 0) { if (!Wido.getHostByName(WEBSITE, &ip)) { // Get the server IP address based on the domain name //根据域名获取服务器IP地址 Serial.println(F("Couldn't resolve!")); } delay(500); }    Wido.printIPdotsRev(ip); Serial.println(F(""));     // Connect to the Yeelink Server连接到服务器的yeelink WidoClient = Wido.connectTCP(ip, 80); // Try to connect cloud server尝试连接云服务器 }    if(WidoClient.connected() && millis() - uploadtStamp > 2000){ uploadtStamp = millis(); // If the device is connected to the cloud server, upload the data every 2000ms. //如果设备连接到云服务器，上传数据的每一2000ms。 // Prepare Http Package for Yeelink & get length //准备和包装长度yeelink for HTTP get int length = 0; char lengthstr[3];     // 创建HTTP数据包 char httpPackage[60] = "";     strcat(httpPackage,"{"value":"); itoa(temp,httpPackage+strlen(httpPackage),10);    //日期（时间）Push the to the HTTP数据包 strcat(httpPackage,"}");     length = strlen(httpPackage); // get the length of data package itoa(length,lengthstr,10); // convert int to char array for posting Serial.print(F("Length = ")); Serial.println(length);     Serial.println(F("Connected to Yeelink server."));     // Send headers Serial.print(F("Sending headers"));     WidoClient.fastrprint(F("POST /v1.0/device/")); WidoClient.fastrprint(F("100/sensor/20/datapoints")); //Please change your device ID and sensor ID here, after creating //Please check the link: http://www.yeelink.net/user/devices //The example URL: http://api.yeelink.net/v1.0/device/100/sensor/20/datapoints WidoClient.fastrprintln(F(" HTTP/1.1")); Serial.print(F("."));     WidoClient.fastrprintln(F("Host: api.yeelink.net")); Serial.print(F("."));     WidoClient.fastrprint(F("U-ApiKey: ")); WidoClient.fastrprintln(API_key); Serial.print(F("."));     WidoClient.fastrprint("Content-Length: ");   WidoClient.fastrprintln(lengthstr); WidoClient.fastrprintln(""); Serial.print(F("."));     Serial.println(F(" done."));     // Send data Serial.print(F("Sending data")); WidoClient.fastrprintln(httpPackage);
Serial.println(F(" done."));     /********** Get the http page feedback ***********/     unsigned long rTimer = millis(); Serial.println(F("Reading Cloud Response!!! ")); while (millis() - rTimer < 2000) { while (WidoClient.connected() && WidoClient.available()) { char c = WidoClient.read(); Serial.print(c); } } delay(1000); // Wait for 1s to finish posting the data stream WidoClient.close(); // Close the service connection    RetryMillis = millis(); // Reset the timer stamp for applying the connection with the service }
if(millis() - sensortStamp > 1000){ sensortStamp = millis(); // read the LM35 sensor value and convert to the degrees every 100ms.
int reading = analogRead(0); temp = reading *0.0048828125*100; Serial.print(F("Real Time Temp: "));   Serial.println(temp);   }}

CC3000 Arduino 连接Yeelink中文注释 示例

CC3000 Arduino 连接Yeelink中文注释示例