『转』ubuntu的电池管理

tp_smapi用于控制电池充电和提供额外的电池信 息。

参考页面：http://www.thinkwiki.org/wiki/Tp_smapi#Battery_charge_control_features

Ubuntu集成这个软件自从Hardy以后的版本， 可以直接使用，无需安装。

电池充电控制

设置开始与停止充电的阀值（百分比）

# echo 40 > /sys/devices/platform/smapi/BAT0/start_charge_thresh

# echo 70 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh

# cat /sys/devices/platform/smapi/BAT0/*_charge_thresh

（表示低于40%时开始充电，高于70%就停止）

设置禁止充电时间

17分内防止充电到BAT0（首选电池）:

# echo 17 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes

 

Hint:

 用于控制给那个电池充电当使用多个电池 Ultrabay battery.

取消禁止充电:

# echo 0 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes

强制禁止充电(即使接AC):

# echo 1 > /sys/devices/platform/smapi/BAT0/force_discharge

Hint:

用于控制给那个电池充电当使用多个电池 Ultrabay battery. 

取消强制禁止充电:

# echo 0 > /sys/devices/platform/smapi/BAT0/force_discharge

  

显示电 池状态信息

显示额外的电池状态，比如充电情况、电压、电流、容量、充电次数和型号信息:

# cat /sys/devices/platform/smapi/BAT0/installed
# cat /sys/devices/platform/smapi/BAT0/state       # idle/charging/discharging
# cat /sys/devices/platform/smapi/BAT0/cycle_count
# cat /sys/devices/platform/smapi/BAT0/current_now # instantaneous current
# cat /sys/devices/platform/smapi/BAT0/current_avg # last minute average
# cat /sys/devices/platform/smapi/BAT0/power_now   # instantaneous power
# cat /sys/devices/platform/smapi/BAT0/power_avg   # last minute average
# cat /sys/devices/platform/smapi/BAT0/last_full_capacity
# cat /sys/devices/platform/smapi/BAT0/remaining_percent
# cat /sys/devices/platform/smapi/BAT0/remaining_running_time
# cat /sys/devices/platform/smapi/BAT0/remaining_charging_time
# cat /sys/devices/platform/smapi/BAT0/remaining_capacity
# cat /sys/devices/platform/smapi/BAT0/design_capacity
# cat /sys/devices/platform/smapi/BAT0/voltage
# cat /sys/devices/platform/smapi/BAT0/design_voltage
# cat /sys/devices/platform/smapi/BAT0/manufacturer
# cat /sys/devices/platform/smapi/BAT0/model
# cat /sys/devices/platform/smapi/BAT0/barcoding
# cat /sys/devices/platform/smapi/BAT0/chemistry
# cat /sys/devices/platform/smapi/BAT0/serial
# cat /sys/devices/platform/smapi/BAT0/manufacture_date
# cat /sys/devices/platform/smapi/BAT0/first_use_date
# cat /sys/devices/platform/smapi/BAT0/temperature # in milli-Celsius
# cat /sys/devices/platform/smapi/ac_connected