CentOS7下搭建基本LNMP环境，部署WordPress

系统环境：CentOS Linux release 7.4.1708 (Core) 3.10.0-693.el7.x86_64

软件版本：nginx-1.12.2.tar.gz

　　　　　php 7.1.11

　　　　　mysql-community-server-5.7.20-1.el7.x86_64

网络环境中配置了DNS服务器，本次nginx服务器的IP是192.168.1.20，域名是wp1.st.local。过程中全部使用域名配置或访问。

一、安装nginx

1、安装依赖及相关支持库

# yum install pcre-devel pcre openssl openssl-devel

2、编译安装nginx

# cd nginx-1.12.2
# ./configure 
  --prefix=/opt/nginx 
  --sbin-path=/usr/sbin/nginx 
  --user=nginx 
  --group=nginx 
　--pid-path=/var/run/nginx.pid 
　--lock-path=/var/run/nginx.lock 
  --with-http_ssl_module 
  --with-http_stub_status_module 
  --with-pcre 
  --error-log-path=/var/log/nginx/error.log 
  --http-log-path=/var/log/nginx/access.log 
  --with-http_gzip_static_module 
  --with-file-aio 
  --with-http_realip_module

3、编译成功

Configuration summary
  + using system PCRE library
  + using system OpenSSL library
  + using system zlib library

  nginx path prefix: "/opt/nginx"
  nginx binary file: "/usr/sbin/nginx"
  nginx modules path: "/opt/nginx/modules"
  nginx configuration prefix: "/opt/nginx/conf"
  nginx configuration file: "/opt/nginx/conf/nginx.conf"
  nginx pid file: "/var/run/nginx.pid"
  nginx error log file: "/var/log/nginx/error.log"
  nginx http access log file: "/var/log/nginx/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"

4、安装

# make && make install

5、检验安装结果

# nginx -V
nginx version: nginx/1.12.2
built by gcc 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) 
built with OpenSSL 1.0.2k-fips  26 Jan 2017
TLS SNI support enabled
configure arguments: --prefix=/opt/nginx --sbin-path=/usr/sbin/nginx --user=nginx --group=nginx --with-http_ssl_module --with-http_stub_status_module --with-pcre --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --with-http_gzip_static_module --with-file-aio --with-http_realip_module --pid-path=/var/run/nginx.pid --lock-path=/var/run/nginx.lock

6、创建nginx用户

# useradd -M -s /sbin/nologin nginx

7、创建nginx的unit

注意文件路径

# vi /usr/lib/systemd/system/nginx.service

[Unit]
Description=The nginx HTTP and reverse proxy server
After=network.target remote-fs.target nss-lookup.target

[Service]
Type=forking
PIDFile=/run/nginx.pid
# Nginx will fail to start if /run/nginx.pid already exists but has the wrong
# SELinux context. This might happen when running `nginx -t` from the cmdline.
# https://bugzilla.redhat.com/show_bug.cgi?id=1268621
ExecStartPre=/usr/bin/rm -f /run/nginx.pid
ExecStartPre=/usr/sbin/nginx -t
ExecStart=/usr/sbin/nginx
ExecReload=/bin/kill -s HUP $MAINPID
KillSignal=SIGQUIT
TimeoutStopSec=5
KillMode=process
PrivateTmp=true

[Install]
WantedBy=multi-user.target

8、防火墙

# iptables -I INPUT 5 -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
# iptables-save >/etc/sysconfig/iptables

 9、配置nginx.conf语法高亮

# wget http://www.vim.org/scripts/download_script.php?src_id=14376 -O /usr/share/vim/vim74/syntax/nginx.vim
# vi /usr/share/vim/vim74/filetype.vim
#追加一行，注意nginx的配置文件路径
au BufRead,BufNewFile /opt/nginx/conf/* set ft=nginx

 10、修改配置文件

# vi /opt/nginx/conf/nginx.conf

user  nginx;
worker_processes  auto;

    server {
        listen       80;
        server_name  wp1.st.local;        #配置域名
        location / {
            root   html;
            index  index.php index.html index.htm;        #增加index.php
        }
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

11、启动服务

# systemctl start nginx.service
# systemctl enable nginx.service

12、访问测试

 二、安装PHP

1、添加扩展源

# yum -y install https://mirror.webtatic.com/yum/el7/epel-release.rpm https://mirror.webtatic.com/yum/el7/webtatic-release.rpm

2、安装支持库

# yum install libxml2 libxml2-devel libpng libpng-devel libcurl-devel libcurl libzip-devel libzip gd bzip2-devel bzip2

3、安装PHP7.1及相关支持

# yum -y install mod_php71w php71w-mbstring php71w-pear php71w-fpm php71w-gd php71w-pdo

php71w-mysql放在安装MySQL时一起安装，因为在未添加mysql57源的时候，可能会安装mariadb-libs作为mysql-community-libs的替代。

4、修改配置文件

# vi /etc/php-fpm.d/www.conf

#指定用户为前面创建的nginx
user = nginx
group = nginx

修改nginx.conf，root最好填写绝对路径，document_root就是root选项的指定目录

#添加
location ~ .php$ {
            root           /opt/nginx/html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
            include        fastcgi_params;
        }

修改所属用户为nginx

# chown -R nginx. /var/lib/php
# chown -R nginx. /opt/nginx/html

5、启动php-fpm，重载nginx

# systemctl start php-fpm.service 
# systemctl enable php-fpm.service
# systemctl reload nginx.service

6、访问测试

# /opt/nginx/html/index.php

<?php
    phpinfo();
?>

注意权限

# chown nginx. index.php

三、安装MySQL5.7

1、添加扩展源

# vi /etc/yum.repos.d/mysql-community.repo

[mysql57-community]
name=MySQL 5.7 Community Server
baseurl=http://repo.mysql.com/yum/mysql-5.7-community/el/7/$basearch/
enabled=1
gpgcheck=1
gpgkey=http://repo.mysql.com/RPM-GPG-KEY-mysql

2、安装MySQL

# yum -y install mysql-community-server php71w-mysql

3、启动并配置

# vi /etc/my.cnf
#添加一行
character-set-server=utf8
# systemctl start mysqld

通过mysql_secure_installation命令按提示设置root密码以及基础的MySQL配置

4、创建数据库和新用户

mysql> create database wordpress;    
mysql> create user 'wp_user'@'%' identified by 'xxxxxxxx'；    #创建用户
mysql> grant all privileges on wordpress.* to 'wp_user'@'%' identified by 'xxxxxxxx';    #授权
mysql> flush privileges;

5、重置MySQL的用户密码

如果忘记MySQL密码，就使用如下办法重置。需要root权限

#vi /etc/my.cnf
[mysqld]
skip-grant-tables
#mysql -uroot
mysql> use mysql;
mysql> update user set authentication_string=password('xxxxxxxx') where user='root';    #5.7版本的密码字段是authentication_string，而不是password
mysql> flush privileges;

修改完后注释掉skip-grant-tables，重启mysqld.service

 四、安装WordPress

1、下载并解压

# wget https://cn.wordpress.org/wordpress-4.9.1-zh_CN.zip
# unzip wordpress-4.9.1-zh_CN.zip
# cp -rva wordpress/* /opt/nginx/html/

2、修改用户和组

# chown nginx. /opt/nginx/html

3、SELINUX

# cd /opt/nginx
# chcon -R -t httpd_sys_content_t html/
# cd html/
# chcon -R -t httpd_sys_rw_content_t wp-content/

通过编译安装的nginx与yum安装的的安全上下文有所不同，yum安装会自动配置正确的上下文，编译安装默认可能是admin_home_t，访问时会提示File not found，必须改为httpd_sys_content_t

4、按照提示部署WordPress

五、配置nginx虚拟机

1、添加配置

虚拟server都可以配置为80端口，配置不同的域名

# mkdir /opt/nginx/conf.d
# vi /opt/nginx/conf.d/virtual1.conf
server {
    listen       80;
    server_name  bbs.st.local;

    location / {
        root   /opt/nginx/virtual;
        index  index.html index.htm;
    }
}
#在nginx.conf全局区块中包含配置文件
# vi /opt/nginx/conf/nginx.conf
include /opt/nginx/conf.d/*.conf;

2、创建虚拟主机目录并修改权限

# mkdir /opt/nginx/virtual
# vi /opt/nginx/virtual/index.html
Nginx Virtual Host Test Page
# chown -R nginx. /opt/nginx/virtual/
# chcon -R -t httpd_sys_content_t /opt/nginx/virtual/

3、重载服务

# systemctl reload nginx.service

4、结果检测

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/st-jun/p/8052764.html