operation is executing and cannot be enqueued

http://d2100.com/questions/29022
作为依赖关系的另一个 NSOperation 添加时不调用 NSOperation dealloc
使用文书我看到很多我自定义的 NSOperation 永远不会被释放。我已经把一个断点放在 dealloc 方法中，它叫做永远不会。

我还注意到作为依赖关系的另一个 NSOperation 添加任何 NSOperation 时出现问题。如果我从我的代码中删除以下句子，称为 myOperation 的 dealloc 方法。

[otherOperation addDependency:myOperation];
 
 
 
 
我新建类 

@interface DownloadOperation:NSOperation

 
并声明了静态实例：

       static DownloadOperation *downloadOperation;   //期望构造工厂方法，不必每次调用都alloc

+ (DownloadOperation*)sharedDownloadOperation

{

    if(downloadOperation==nil)

    {

        downloadOperation=[[self alloc]init];

    }

    return downloadOperation;

}

- (void)initWithURL:(NSString*)url delegate:(id<downloadFinishDelegate>)delegate//delegate是资料下载结束的回调

{

        _webReachable=[WebConnectionWebConnect];

        _delegate=delegate;

        _enc =CFStringConvertEncodingToNSStringEncoding(kCFStringEncodingGB_18030_2000);  

        _request=[[NSURLRequestrequestWithURL:[NSURLURLWithString:[url stringByReplacingPercentEscapesUsingEncoding:NSUTF8StringEncoding]]]retain];

        self.XMLData=[NSMutableData data];

}

- (void)start            //NSOperation添加到queue自动执行的函数

{

    if([NSURLConnectioncanHandleRequest:_request]&&_webReachable)

    {

        _connection=[[NSURLConnectionconnectionWithRequest:_requestdelegate:self]retain];

        while (_connection!=nil) {

            [[NSRunLoop  currentRunLoop]runMode:NSDefaultRunLoopMode    beforeDate:[NSDatedistantFuture]];

        }

    }

    else

    {

        UIAlertView *alert=[[UIAlertView alloc]initWithTitle:@"无网络连接1" message:@"请检查网络" delegate:nil cancelButtonTitle:@"确定" otherButtonTitles:nil, nil];

        [alert show];

        [alert release];

    }

}

调用类：

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath

{

       self.tableView.UserInteractionEnabled=NO;

      [[DownloadOperation sharedDownloadOperation]initWithURL:@"http://www.bart.gov/dev/eta/bart_eta.xml" delegate:self];

      [queue  addOperation:[DownloadOperation sharedDownloadOperation]];

}

- (void)downloadFinish:(NSMutableData*)data //类：DownloadOperation下载完数据回调

{

    self.tableView.userInteractionEnabled=YES;

}

结果执行一次正常，第二次出现错误：operation is executing and cannot be enqueued

后来也没解决，只好放弃静态变量，每次都重新创建DownloadOperation类的实例

在论坛上看到的类似案例，未验证，仅供参考

问:
I would like to restart a connection re-invoking [request 
startAsynchronous] (我出现类似问题，[operation start]  :operation is executing and cannot be enqueued) if for example the first request does not return 
expected results. 
The problem is that the second attempt to call startAsynchronous raise 
an exception: 

*** Terminating app due to uncaught exception 
'NSInvalidArgumentException', reason: '*** -[NSOperationQueue 
addOperation:]: operation is finished and cannot be enqueued' 

I'm pretty new to ASIHTTPRequest, so maybe I'm trying to do an 
unsupported operation... 
I'm doing something wrong? Should I create another request and then 
call startAsynchronous on it? 

- (void)viewDidLoad { 
        [super viewDidLoad]; 

        // remote asynchronous call 
        NSURL *url = [self getConnectionURL]; 

        mainHTTPRequest = [[ASIHTTPRequest requestWithURL:url] retain]; 
        [mainHTTPRequest setDelegate:self]; 
        [mainHTTPRequest startAsynchronous];   //  ***** FIRST CALL  ***** 
} 


- (void)requestFinished:(ASIHTTPRequest *)request { 
        NSString *responseString = [request responseString]; 

        BOOL repeat = [self checkIfRepeatNeeded:responseString]; 

        if (repeat) { 
                [request startAsynchronous];   //  ***** SECOND CALL  ***** 
                return; 
        } 

        // ... further processing... 
}
 
 
 
答：
> I would like to restart a connection re-invoking [request
> startAsynchronous] if for example the first request does not return
> expected results.
> The problem is that the second attempt to call startAsynchronous raise
> an exception:
> 
> *** Terminating app due to uncaught exception
> 'NSInvalidArgumentException', reason: '*** -[NSOperationQueue
> addOperation:]: operation is finished and cannot be enqueued'

Yes, you cannot restart a request like this.

One option would be to make a copy of your request, and start that:

ASIHTTPRequest *newRequest = [[request copy] autorelease];
[newRequest startAsynchronous];

But, if you're just doing a simple GET request, you can just as easily create a new request with the same url.

问：

What if I have a model class with an ASIHTTPFormDataRequest *request ivar? Would something like this work?

- (void)dealloc {

    [request clearDelegatesAndCancel];

    [request release];

    [super dealloc];

}

- (void)sendRequest {

    [request clearDelegatesAndCancel];

    [request release];

    NSURL *url = [[NSURL alloc] initWithString:@"https://example.com/"];

    request = [[ASIFormDataRequest alloc] initWithURL:url];

    [url release];

    request.delegate = self;

    [request setPostValue:@"value1" forKey:@"key1"];

    [request setPostValue:@"value2" forKey:@"key2"];

    [request setPostValue:session forKey:@"iVarKey"];

    [request startAsynchronous];

}

The first time i call -sendRequest, request will be nil. That should be fine. Any time after the first that I call it, the first two lines should reset the request correctly, right?
Also, does ASIHTTPRequest have an instance method that does:

[request clearDelegatesAndCancel];

[request release];

Or, should I just create an ASIHTTPRequest category and define a method that does the above?

I'm asking because I want to write this code in four spots: dealloc, sendRequest, requestFinished, and requestFailed.

Wait, if I call [request release] will that call my delegate and/or queue’s failure delegate methods like [request cancel] does? If not, then can I just do [request release] in sendRequest, requestFinished, and requestFailed; and do both [request clearDelegatesAndCancel] and then [request release] in dealloc?



答：

You must call cancel and clear the delegate before you release your reference to the request. Calling release will not cause the request to immediately stop, so the delegate may be called later on (by which time it might not exist).

I'm on an older version, but I do:

request.delegate = nil; // after this line there are guaranteed to be no more calls to delegate
[request cancel];
[request release];


 未验证：留着慢慢看 http://blog.csdn.net/proteas/article/details/7226173

近期将xcode升级到了4.2，SDK是 iOS5。在 iOS 5 下，以前可以正常工作的 NSOperation，会崩溃。崩溃的原因是：取消队列中的操作，但是该操作还没有开始。

解决这个问题的方法是：

        在 start 方法中判断操作是否已经取消，如果取消，结束操作，没有取消，再执行操作。

        在 cancel 方法中判断操作是否正在执行，如果在执行，结束操作，如果没有，修改操作的isCancelled状态。

头文件：

[cpp]  view plain copy
  1. #import <Foundation/Foundation.h>  
  2.   
  3.   
  4. @interface FMURLRequest : NSOperation {  
  5.       
  6.     BOOL _isReady;  
  7.     BOOL _isCancelled;  
  8.     BOOL _isExecuting;  
  9.     BOOL _isFinished;  
  10. }  
  11.   
  12. - (void)cancel;  
  13.   
  14. @end  


实现文件：

[cpp]  view plain copy
  1. #import "FMURLRequest.h"  
  2.   
  3.   
  4. @interface FMURLRequest ()  
  5.   
  6. - (BOOL)isReady;  
  7. - (BOOL)isExecuting;  
  8. - (BOOL)isFinished;  
  9. - (BOOL)isCancelled;  
  10. - (BOOL)isConcurrent;  
  11.   
  12. - (void)start;  
  13. - (void)finish;  
  14.   
  15. @end  
  16.   
  17.   
  18. @implementation FMURLRequest  
  19.   
  20.   
  21. - (id)init {  
  22.       
  23.     if ((self = [super init])) {  
  24.         _isCancelled = NO;  
  25.         _isExecuting = NO;  
  26.         _isFinished = NO;  
  27.         _isReady = YES;  
  28.     }  
  29.       
  30.     return self;  
  31. }  
  32.   
  33.   
  34. - (void)dealloc {  
  35.       
  36.     [super dealloc];  
  37. }  
  38.   
  39.   
  40. #pragma -  
  41. #pragma mark Operation Management & Super Class Methods  
  42.   
  43.   
  44. - (BOOL)isReady {  
  45.       
  46.     return _isReady;  
  47. }  
  48.   
  49.   
  50. - (BOOL)isExecuting {  
  51.       
  52.     return _isExecuting;  
  53. }  
  54.   
  55.   
  56. - (BOOL)isFinished {  
  57.       
  58.     return _isFinished;  
  59. }  
  60.   
  61.   
  62. - (BOOL)isCancelled {  
  63.       
  64.     return _isCancelled;  
  65. }  
  66.   
  67.   
  68. - (BOOL)isConcurrent {  
  69.       
  70.     return YES;  
  71. }  
  72.   
  73.   
  74. - (void)start {  
  75.       
  76.     if (![NSThread isMainThread]) {  
  77.         [self performSelectorOnMainThread:@selector(start) withObject:nil waitUntilDone:NO];  
  78.         return;  
  79.     }  
  80.       
  81.     [self willChangeValueForKey:@"isExecuting"];  
  82.     _isExecuting = YES;  
  83.     [self didChangeValueForKey:@"isExecuting"];  
  84.       
  85.     if ([self isCancelled]) {  
  86.         [self finish];  
  87.         return;  
  88.     }  
  89.       
  90.     // TODO: start operation  
  91. }  
  92.   
  93.   
  94. - (void)finish {  
  95.       
  96.     [self willChangeValueForKey:@"isExecuting"];  
  97.     [self willChangeValueForKey:@"isFinished"];  
  98.       
  99.     _isExecuting = NO;  
  100.     _isFinished = YES;  
  101.       
  102.     [self didChangeValueForKey:@"isExecuting"];  
  103.     [self didChangeValueForKey:@"isFinished"];  
  104. }  
  105.   
  106.   
  107. - (void)cancel {  
  108.       
  109.     [self willChangeValueForKey:@"isCancelled"];  
  110.     _isCancelled = YES;  
  111.     [self didChangeValueForKey:@"isCancelled"];  
  112.       
  113.     if ([self isExecuting] == YES) {  
  114.         // TODO: clean resource  
  115.         [self finish];  
  116.     }  
  117. }  
  118.   
  119. @end  
复制代码 
NSOperation class  
The NSOperation class is an abstract class you use to encapsulate the code and data associated with a single task.Because it is abstract, you do not use this class directly but instead subclass or use one of the system-defined subclasses (NSInvocationOperation orNSBlockOperation) to perform the actual task.An operation object is a single-shot object—that is, it executes its task once and cannot be used to execute it again.You typically execute operations by adding them to an operation queue (an instance of the NSOperationQueue class).An operation queue executes its operations either directly, by running them on secondary threads, or indirectly using the libdispatch libraryIf you do not want to use an operation queue, you can execute an operation yourself by calling its start method directly from your code. Executing operations manually does put more of a burden on your code, because starting an operation that is not in the ready state triggers an exception. The isReady method reports on the operation’s readiness.  
 key-value coding (KVC) and key-value observing (KVO)  
Concurrent(并发) versus Non-Concurrent  
If you plan on executing an operation object manually, instead of adding it to a queue, you can design your operation to execute in a concurrent or non-concurrent manner. Operation objects are non-concurrent by default. In a non-concurrent operation, the operation’s task is performed synchronously—that is, the operation object does not create a separate thread on which to run the task. Thus, when you call the start method of a non-concurrent operation directly from your code, the operation executes immediately in the current thread. By the time the start method of such an object returns control to the caller, the task itself is complete.  
In contrast to a non-concurrent operation, which runs synchronously, a concurrent operation runs asynchronously. In other words, when you call the start method of a concurrent operation, that method could return before the corresponding task is completed. This might happen because the operation object created a new thread to execute the task or because the operation called an asynchronous function. It does not actually matter if the operation is ongoing when control returns to the caller, only that it could be ongoing.  
If you always plan to use queues to execute your operations, it is simpler to define them as non-concurrent. If you execute operations manually, though, you might want to define your operation objects as concurrent to ensure that they always execute asynchronously. Defining a concurrent operation requires more work, because you have to monitor the ongoing state of your task and report changes in that state using KVO notifications. But defining concurrent operations can be useful in cases where you want to ensure that a manually executed operation does not block the calling thread.  
For non-concurrent operations, you typically override only one method:  
main  
Into this method, you place the code needed to perform the given task. Of course, you should also define a custom initialization method to make it easier to create instances of your custom class. You might also want to define getter and setter methods to access the data from the operation. However, if you do define custom getter and setter methods, you must make sure those methods can be called safely from multiple threads.  
If you are creating a concurrent operation, you need to override the following methods at a minimum:  
start  
isConcurrent  
isExecuting  
isFinished  
  
- (void)start  
Begins the execution of the operation.  
The default implementation of this method updates the execution state of the operation and calls the receiver’s main method. This method also performs several checks to ensure that the operation can actually run.  
  
- (void)main  
Performs the receiver’s non-concurrent task.  
The default implementation of this method does nothing. You should override this method to perform the desired task. In your implementation, do not invoke super.If you are implementing a concurrent operation, you are not required to override this method but may do so if you plan to call it from your custom start method.  
  
  
NSOperationQueue  
The NSOperationQueue class regulates the execution of a set of NSOperation objects. After being added to a queue, an operation remains in that queue until it is explicitly canceled or finishes executing its task.You cannot directly remove an operation from a queue after it has been added. An operation remains in its queue until it reports that it is finished with its task.
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/snake-hand/p/3144858.html