Verilog之电平检测

检测低电平为例

module detect_module                     
(                    
    CLK, RSTn,                    
     RX_Pin_In,                
     H2L_Sig                
);                    
    input CLK;                    
     input RSTn;                
     input RX_Pin_In;                
     output H2L_Sig;                
                     
     /******************************/                
                     
     reg H2L_F1;                
     reg H2L_F2;                
                     
     always @ ( posedge CLK or negedge RSTn )                
         if( !RSTn )                
              begin            
                    H2L_F1 <= 1'b1;    
                     H2L_F2 <= 1'b1;
                end    
          else            
              begin            
                    H2L_F1 <= RX_Pin_In;    
                     H2L_F2 <= H2L_F1;
                end    
                    
    /***************************************/                
                    
    assign H2L_Sig = H2L_F2 & !H2L_F1;                
                    
    /***************************************/                
                    
endmodule