rhel-system-roles.selinux

此模块为为系统模块，可通过安装rhel-system-roles来获取。模块功能包括：

设置selinux模式（enforcing和permissive）
恢复文件默认上下文类型（restorecon)
设置获取上下文
管理登录以及端口

用法实例

设置/修改策略类型和模式

[root@localhost project2]# vim selinux.yml 
---
- hosts: 192.168.190.134
  vars:
    selinux_policy: targeted
    selinux_state: permissive
  roles:
    - role: roles/rhel-system-roles.selinux

注意：这种方式只是临时修改(相当于手动执行setenforce,然后在未重启的情况下，disable模式并不会生效。所以需要把reboot加入到任务中.

reboot受控机并修改模式

[root@localhost project2]# vim selinux.yml 
---
- hosts: 192.168.190.134
  vars:
    selinux_policy: targeted
    selinux_state: disabled
  tasks:
    - name: apply SElinux role
      block:
        - include_role:
            name: roles/rhel-system-roles.selinux            
      rescue:
        - name: check
          fail:
          when: not selinux_reboot_required
        - name: reboot
          reboot:
        - name: changed
          include_role:
            name: roles/rhel-system-roles.selinux
......

[root@localhost ~]# getenforce        查看被控机的工作模式
Disabled

注意：selinux角色中有变量selinux_reboot_required，值默认为True，而selinux_role有一task,只要此变量值为True，则返回fail，所以playbook会执行rescue任务块。

修改targeted策略中规则的布尔值

开启samba_enable_home_dirs 和 ssh_sysadm_login 两个规则，并把ssh_sysadm_login设置为开机自启用。

[root@localhost project2]# !vim
vim test.yml 
---
- hosts: 192.168.190.134
  vars:
    selinux_booleans:
      - name: 'samba_enable_home_dirs'
        state: on
      - name: 'ssh_sysadm_login'
        state: on
        persistent: yes
  roles:
    - role: roles/rhel-system-roles.selinux

[root@localhost ~]# getsebool -a | grep -e '^samba_enable_home*'   被控机查看状态已经改为了on
samba_enable_home_dirs --> on

[root@localhost ~]# getsebool -a | grep -e '^ssh_sysadm_*'
ssh_sysadm_login --> on

设置selinux上下文type

[root@localhost project2]# vim test.yml 
---
- hosts: 192.168.190.134
  vars:
    selinux_fcontexts:
      - target: /opt/www(/.*)?
        setype: httpd_sys_content_t
        state: present
    selinux_restore_dirs:
      - /opt/www
  roles:
    - role: roles/rhel-system-roles.selinux

[root@localhost www]# ls -Z
unconfined_u:object_r:httpd_sys_content_t:s0 html                查看此目录下文件的selinux上下文的type变为了httpd_sys_content_t。

设置selinux端口

[root@localhost project2]# !vim
vim test.yml 
---
- hosts: 192.168.190.134
  vars:
    selinux_ports:
      - ports: '9528'
        proto: tcp
        setype: http_port_t               端口对应的上下文类型为httpd_port_t
        state: present
  roles:
    - role: roles/rhel-system-roles.selinux

[root@localhost www]# semanage port -l | grep http_port_t          被控机查询发现9528端口已经添加进去
http_port_t                    tcp      9528, 80, 81, 443, 488, 8008, 8009, 8443, 9000

rhel-system-roles.network

运用network角色配置被控机的ipv4地址

步骤：

1.观察被控机上网卡信息，新加的网卡并没有添加连接，ip和相关信息都没有配置

[root@localhost ~]# ip a
......
3: ens224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:0c:29:2e:3b:d0 brd ff:ff:ff:ff:ff:ff

2.主控机安装rhel-system-roles,将network角色包复制到项目文件目录下。

[root@localhost ~]# yum install -y rhel-system-roles
......
Installed:
  rhel-system-roles-1.0-10.el8_1.noarch                                                       

Complete!

[root@localhost ~]# cd /usr/share/ansible/roles
[root@localhost roles]# ls
linux-system-roles.kdump    linux-system-roles.storage   rhel-system-roles.postfix
linux-system-roles.network  linux-system-roles.timesync  rhel-system-roles.selinux
linux-system-roles.postfix  rhel-system-roles.kdump      rhel-system-roles.storage
linux-system-roles.selinux  rhel-system-roles.network    rhel-system-roles.timesync

[root@localhost roles]# cp -a rhel-system-roles.network /project2/roles

3.编写playbook，并调用network角色，为被控机配置Ip地址

[root@localhost project2]# vim test.yml
---
- hosts: 192.168.190.134
  vars:
    network_connections:
      - name: ens224
        type: ethernet
        ip:
          route_metric4: 100
          dhcp4: no
          gateway4: 192.168.190.254
          dns:
            - 144.144.144.144
            - 8.8.8.8
          address:
            - 192.168.190.136/24
  roles:
    - role: roles/rhel-system-roles.network

4.执行plybook，查看被控机ip配置

[root@localhost ~]# ip a
......
3: ens224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000           ip地址已经配置成功
    link/ether 00:0c:29:2e:3b:d0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.190.136/24 brd 192.168.190.255 scope global noprefixroute ens224
       valid_lft forever preferred_lft forever
    inet6 fe80::ea28:75af:f8c8:fccb/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens224                     网卡配置文件已经生成
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
ETHTOOL_OPTS="-K ens224"
BOOTPROTO=none
IPADDR=192.168.190.136
PREFIX=24
GATEWAY=192.168.190.254
DNS1=144.144.144.144
DNS2=8.8.8.8
DEFROUTE=yes

停用此前新建的连接

步骤：

1.同样编写playbook，调用network角色

[root@localhost project2]# !vim
vim test2.yml
---
- hosts: 192.168.190.134
  vars:
    network_connections:
      - name: ens224
        state: down
  roles:
    - role: roles/rhel-system-roles.network

2.查看被控机上此网卡状态

[root@localhost project2]# ansible control2 -a 'ip a' -i inventory 
control2 | CHANGED | rc=0 >>
......
3: ens224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000   
    link/ether 00:0c:29:2e:3b:d0 brd ff:ff:ff:ff:ff:ff

激活连接

步骤：

1.修改state值，执行playbook

[root@localhost project2]# vim test2.yml 
---
- hosts: 192.168.190.134
  vars:
    network_connections:
      - name: ens224
        state: up
  roles:
    - role: roles/rhel-system-roles.network

2.查看被控机,ens224已经成功连接。

[root@localhost project2]# ansible control2 -a 'nmcli con show' -i inventory 
control2 | CHANGED | rc=0 >>
NAME    UUID                                  TYPE      DEVICE 
ens160  88b8c211-3684-44b5-98b9-21a3f221177d  ethernet  ens160 
ens224  e9f31206-1e35-414d-8262-76790a63f8ad  ethernet  ens224