拓扑图如下
Switch0配置
enable 进入特权模式
configure terminal 进入全局模式
interface port-channel 5 创建以太通道
switchport trunk encapsulation 将通道进行封装
switchport mode trunk 将通道修改为trunk模式
exit 返回上一级
interface range f0/10-11 进入端口
channel-group 5 mode on 将端口划分到通道中
exit 返回上一级
vlan 10 创建vlan10
vlan 20 创建vlan20
interface f0/1 进入端口
switchport mode access 将端口模式修改为access
switchport access vlan 10 将端口划分到vlan10
interface f0/2 进入端口
switchport mode access 将端口模式修改为access
switchport access vlan 20 将端口划分到vlan20
end 返回特权模式
copy running-config startup-config 保存
Switch1配置
enable 进入特权模式
configure terminal 进入全局模式
interface port-channel 5 创建以太通道
switchport trunk encapsulation 将通道进行封装
switchport mode trunk 将通道修改为trunk模式
exit 返回上一级
interface range f0/10-11 进入端口
channel-group 5 mode on 将端口划分到通道中
exit 返回上一级
vlan 10 创建vlan10
vlan 20 创建vlan20
interface f0/1 进入端口
switchport mode access 将端口模式修改为access
switchport access vlan 10 将端口划分到vlan10
interface f0/2 进入端口
switchport mode access 将端口模式修改为access
switchport access vlan 20 将端口划分到vlan20
end 返回特权模式
copy running-config startup-config 保存