CAS (5) —— Nginx代理模式下浏览器访问CAS服务器配置详解

CAS (5) —— Nginx代理模式下浏览器访问CAS服务器配置详解

tomcat版本: tomcat-8.0.29

jdk版本: jdk1.8.0_65

nginx版本: nginx-1.9.8

cas版本: cas4.1.2
cas-client-3.4.1

参考来源:

jasig.github.io:CAS protocol

https://github.com/Jasig/java-cas-client

通过Proxy访问其它Cas应用

CAS负载均衡配置——SSL篇

CAS负载均衡配置

CAS客户端集群

  • 以下的示例采用我博客的另外两篇文章中搭建好的测试环境举例

CAS (1) —— Mac下配置CAS到Tomcat（服务端）

CAS (2) —— Mac下配置CAS到Tomcat（客户端）

CAS (3) —— Mac下配置CAS客户端经代理访问Tomcat CAS

Mac为nginx安装nginx-sticky-module

【高可用HA】Nginx (1) —— Mac下配置Nginx Http负载均衡(Load Balancer)之101实例

Nginx (2) —— Mac下配置Apache Httpd的Https/SSL （待出）

目标架构

此代理非彼代理

在CAS官方网站上给出了一个“Proxy Web Flow Diagram”：

顺序图：(来源于http://jasig.github.io/cas/4.0.x/protocol/CAS-Protocol.html)

这个方案主要适用一种场景：

有两个应用App1和App2，它们都是受Cas Server保护的，即请求它们时都需要通过Cas Server的认证。现需要在App1中通过Http请求访问App2，显然该请求将会被App2配置的Cas的AuthenticationFilter拦截并转向Cas Server，Cas Server将引导用户进行登录认证，这样我们也就不能真正的访问到App2了。针对这种应用场景，Cas也提供了对应的支持。通过Proxy访问其它Cas应用

无论是用中文关键字在“度娘”，还是用英文关键字再“谷哥”上搜索，多数文章都是描述上面这样一个场景。

而我这里介绍的“代理”，并非是上述场景——依靠代理去验证ticket，“代理”在此的角色是：

  • 只做分发反向代理（未来的负载均衡器）
* 注意：所以说“此代理非彼代理”

准备

要搭建上面这个环境会相对复杂，我们需要参照之前的文章准备以下必备的组件或环境：

  1. 2个Tomcat服务器作为客户端应用程序服务器（即cas的客户端）

     app1.hoau.com:8081/8413(http/https)
 app2.hoau.com:8082/8423(http/https)

    参照Tomcat Cluster、Tomcat SSL和CAS Client

  2. 1个配置好SSL的Nginx服务器作为中间层代理转发服务器（后可扩展为LoadBalancer）

     proxy.sso.hoau.com:85/443(http/https)

    参照Nginx Load Balancer与Nginx Sticky Session

  3. 另一个1个带有SSL的Tomcat服务器作为CAS服务器

     sso.hoau.com:8083/8433(http/https)

    参照Tomcat SSL与CAS Server

关键配置

  • 代理服务器（Nginx x 1）

    nginx.conf

    • http

      server:

        server {
      listen       85;
  	server_name  proxy.sso.hoau.com;
      location / {  
      #index index.html index.htm;
  	#设置主机头和客户端真实地址，以便服务器获取客户端真实IP

      proxy_set_header   Host   $host;
      proxy_set_header   Referer $http_referer;
      proxy_set_header   Cookie $http_cookie;
  	proxy_set_header   X-Real-IP  $remote_addr;
      proxy_set_header   X-Forwarded-For 				$proxy_add_x_forwarded_for;

      proxy_redirect off;  
      #禁用缓存
      #proxy_buffering off;

      proxy_connect_timeout 3;
      proxy_send_timeout 30;
      proxy_read_timeout 30; 
      proxy_pass http://cas_server_http; 
  }

      upstream:

        upstream cas_server_http {  
  	#根据ip计算将请求分配各那个后端tomcat，许多人误认为可以解决session问题，其实并不能。  
      #同一机器在多网情况下，路由切换，ip可能不同  
  	#ip_hash;   
      #sticky;

  	#Richard: http
      server localhost:8083 weight=1 srun_id=c; 
      #server localhost:8084 weight=1 srun_id=c; 
  	jvm_route $cookie_JSESSIONID|sessionid reverse;
  }

      *注意：

      （1）以上的“jvm_route $cookie_JSESSIONID|sessionid reverse;”是关键配置，因为CAS是依赖于Session和Cookie进行身份验证的。

      （2）srun_id=c，其中“c”需要与CAS服务器Tomcat server.xml文件里的jvmRoute配置“

        <Engine name="Catalina" defaultHost="localhost" jvmRoute="c">”

    • https

      server:

        server { 
  	listen 443;
      server_name  proxy.sso.hoau.com;
  	ssl on; 
      ssl_certificate /Users/Richard/Documents/Dev/servers/cluster/nginx/keys/server.crt; 
  	ssl_certificate_key  /Users/Richard/Documents/Dev/servers/cluster/nginx/keys/server.key; 

      ssl_session_timeout 5m;
      ssl_protocols SSLv3 TLSv1;
  	ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;
      ssl_prefer_server_ciphers on;

  	location / {
          proxy_redirect off;  

  	    proxy_set_header Host $host;  
          proxy_set_header   Referer $http_referer;
  	    proxy_set_header   Cookie $http_cookie;
          proxy_set_header X-Real-IP $remote_addr;  
  	    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
          proxy_set_header X-FORWARDED-HOST $server_addr;  
  	    proxy_set_header X-FORWARDED-PORT $server_port;

          proxy_connect_timeout 3;
  	    proxy_send_timeout 30;
          proxy_read_timeout 30;

          proxy_pass https://cas_server_ssl;
		}	
  }

      *注意：以上的ssl为关键配置“ssl_certificate”和“ssl_certificate_key”需要指向正确的证书和密钥。

      upstream：

        upstream cas_server_ssl {  
      #Richard: https todo
  	server sso.hoau.com:8433 weight=1 srun_id=c;  
      #server sso.hoau.com:8443 weight=1 srun_id=c; 
  	jvm_route $cookie_JSESSIONID|sessionid reverse;
  }

*注意：以上http和https可以只配一项，或两者兼存皆可，端口不要冲突。

  • CAS客户端应用服务器（Tomcat x 2）

    以下客户端的蓝本可以在github上收到（关键字：“cas-sample-java-webapp”），我这里只贴出自己的关键点和修改后的结果。

    CAS客户端的应用服务器有两台，如果不使用Spring Security的集成，比较关键配置就只有pom.xml（编译）和web.xml（部署）：

    • 两个环境编译类似，pom.xml（贴全了，有无冗余请自行解决）：

      *注意：以下Spring Security相关依赖为非必须

        <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  	xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
  	<modelVersion>4.0.0</modelVersion>
  	<groupId>iamlabs.unicon.net</groupId>
  	<artifactId>cas-sample-java-webapp</artifactId>
  	<version>0.0.1-SNAPSHOT</version>
  	<packaging>war</packaging>
  	<name>CAS Example Java Web App</name>
  	<description>A sample web application that exercises the CAS protocol features via the Java CAS Client.</description>
  	<build>
  		<finalName>cas-sample-java-webapp</finalName>
  		<plugins>
  			<plugin>
  				<groupId>org.apache.maven.plugins</groupId>
  				<artifactId>maven-compiler-plugin</artifactId>
  				<version>2.5.1</version>
  				<configuration>
  					<source>1.7</source>
  					<target>1.7</target>
  				</configuration>
  			</plugin>
  		</plugins>
  	</build>

  	<properties>       
          <spring.version>3.2.4.RELEASE</spring.version> 
          <casclient.version>3.4.1</casclient.version>        
      </properties>  

  	<dependencies>

  	<dependency>
  		<groupId>commons-logging</groupId>
  		<artifactId>commons-logging</artifactId>
  		<version>1.1.1</version>
  	</dependency>

  	<!-- Logging -->    
  	<dependency>  
  	    <groupId>org.slf4j</groupId>  
          <artifactId>slf4j-api</artifactId>  
  	    <version>1.7.13</version>  
      </dependency>  
  	<dependency>  
  		<groupId>org.slf4j</groupId>  
          <artifactId>slf4j-simple</artifactId>  
  	    <version>1.7.13</version>  
      </dependency>    
  	<dependency>    
  	    <groupId>org.slf4j</groupId>    
  	    <artifactId>slf4j-log4j12</artifactId>    
  	    <version>1.7.13</version>  	
  	</dependency> 

  	<dependency>
  		<groupId>org.opensaml</groupId>
  		<artifactId>opensaml1</artifactId>
  		<version>1.1</version>
  	</dependency>

  	<dependency>
  		<groupId>javax.servlet</groupId>
  		<artifactId>javax.servlet-api</artifactId>
  		<version>3.1.0</version>
  		<scope>provided</scope>
  	</dependency>

  	<dependency>
  		<groupId>org.jasig.cas.client</groupId>
  		<artifactId>cas-client-core</artifactId>
    		<version>${casclient.version}</version>
  		<exclusions>
  			<exclusion>
  				<groupId>javax.servlet</groupId>
  				<artifactId>servlet-api</artifactId>
  			</exclusion>
  		</exclusions>
  	</dependency>

  	<dependency>
  		<groupId>org.jasig.cas.client</groupId>
  		<artifactId>cas-client-integration-tomcat-common</artifactId>
  		<version>${casclient.version}</version>
  	</dependency>

  	<dependency>
  		<groupId>commons-codec</groupId>
  		<artifactId>commons-codec</artifactId>
  		<version>1.6</version>
  	</dependency>

  	<dependency>
  		<groupId>org.apache.santuario</groupId>
  		<artifactId>xmlsec</artifactId>
  		<version>1.4.3</version>
  	</dependency>

  	<dependency>  
          <groupId>org.springframework</groupId>  
  	    <artifactId>spring-core</artifactId>  
          <version>${spring.version}</version>  
      </dependency>  
  	<dependency>  
          <groupId>org.springframework</groupId>  
          <artifactId>spring-beans</artifactId>  
          <version>${spring.version}</version>  
  	</dependency> 
       <dependency>  
  	    <groupId>org.springframework</groupId>  
          <artifactId>spring-context</artifactId>  
  	    <version>${spring.version}</version>  
      </dependency> 
  	 <dependency>  
          <groupId>org.springframework</groupId>  
  	    <artifactId>spring-web</artifactId>  
          <version>${spring.version}</version>  
  	</dependency>  

      <dependency>  
  	   <groupId>org.springframework.security</groupId>
  		<artifactId>spring-security-core</artifactId>
  	    <version>${spring.version}</version>  
      </dependency>
  	<dependency>  
        <groupId>org.springframework.security</groupId>
  		<artifactId>spring-security-web</artifactId>
          <version>${spring.version}</version>  
  	</dependency>  
      <dependency>  
  	    <groupId>org.springframework.security</groupId>
  		<artifactId>spring-security-config</artifactId>  
  	    <version>${spring.version}</version>  
      </dependency>  
  	</dependencies>
  </project>

    • https://app1.hoau.com:8413

      web.xml:

        <?xml version="1.0" encoding="UTF-8"?>
  <web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  	xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">


  	 <context-param>
          <param-name>log4jConfigLocation</param-name>
          <param-value>/WEB-INF/log4j.properties</param-value>
      </context-param>


      <listener>
  		<listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
  	</listener>
      
      <!--
      <listener>
      	<listener-class>org.jasig.cas.client.session.SingleSignOutHttpSessionListener</listener-class>
  	</listener>
      <filter>
  		<filter-name>CAS Single Sign Out Filter</filter-name>
     		<filter-class>org.jasig.cas.client.session.SingleSignOutFilter</filter-class>
  		<init-param>
        		<param-name>casServerUrlPrefix</param-name>
  			<param-value>https://proxy.sso.hoau.com:443</param-value>
     		</init-param>
  	</filter>

  	<filter-mapping>
     		<filter-name>CAS Single Sign Out Filter</filter-name>
     		<url-pattern>/*</url-pattern>
  	</filter-mapping>
  	-->

  	<filter>
  		<filter-name>CAS Validation Filter</filter-name>
  		<filter-class>org.jasig.cas.client.validation.Cas20ProxyReceivingTicketValidationFilter</filter-class>

  		<!-- 
  		<filter-class>org.jasig.cas.client.validation.Saml11TicketValidationFilter</filter-class> 
  		-->	
  		<!-- 
  		<filter-class>org.jasig.cas.client.validation.Cas20ProxyReceivingTicketValidationFilter</filter-class>	
  		-->	
  	
  	<init-param>
  		<param-name>casServerUrlPrefix</param-name>
  		<!--
  		<param-value>https://sso.hoau.com:8433/cas</param-value>
  		<param-value>https://proxy.sso.hoau.com:443/cas</param-value>
  		-->
  		<param-value>https://proxy.sso.hoau.com:443/cas</param-value>
  	</init-param>
  	
  	<!---->

  	<init-param>
  		<param-name>serverName</param-name>
  		<param-value>https://app1.hoau.com:8413</param-value>
  	</init-param>

  	<init-param>
  		<param-name>redirectAfterValidation</param-name>
  		<param-value>true</param-value>
  	</init-param>
  	<init-param>
  		<param-name>useSession</param-name>
  		<param-value>true</param-value>
  	</init-param>
  	<init-param>
  		<param-name>acceptAnyProxy</param-name>
  		<param-value>true</param-value>
  	</init-param>
  	<!-- 
  	<init-param>
  		<param-name>ticketValidatorClass</param-name>
  		<param-value>org.jasig.cas.client.validation.Cas20ProxyTicketValidator</param-value>
  	</init-param>
  	-->
  	<!-- http://haohaoxuexi.iteye.com/blog/2145751
  	<init-param>
  		<param-name>proxyReceptorUrl</param-name>
  		<param-value>/proxyCallback</param-value>
  	</init-param>
  	<init-param>
  		<param-name>proxyCallbackUrl</param-name>
  		<param-value>https://app1.hoau.com:8413/cas1/proxyCallback</param-value>
  	</init-param>
  	-->
  </filter>

  <filter>
  	<filter-name>CAS Authentication Filter</filter-name>
  	<filter-class>org.jasig.cas.client.authentication.AuthenticationFilter</filter-class>
  	<!-- 
  	<filter-class>org.jasig.cas.client.authentication.Saml11AuthenticationFilter</filter-class> 
  	-->
  	<!-- 
  	<filter-class>org.jasig.cas.client.authentication.AuthenticationFilter</filter-class> 
  	-->
  	<init-param>
  		<param-name>casServerLoginUrl</param-name>
  		<!--
  		<param-value>https://sso.hoau.com:8433/cas/login</param-value>
  		-->	
  		<param-value>https://proxy.sso.hoau.com:443/cas/login</param-value>
  	</init-param>
  	<init-param>
  		<param-name>serverName</param-name>
  		<param-value>https://app1.hoau.com:8413</param-value>
  	</init-param>
  </filter>

  <filter>
  	<filter-name>CAS HttpServletRequest Wrapper Filter</filter-name>
  	<filter-class>org.jasig.cas.client.util.HttpServletRequestWrapperFilter</filter-class>
  </filter>

  <filter-mapping>
  	<filter-name>CAS Validation Filter</filter-name>
  	<url-pattern>/*</url-pattern>
  </filter-mapping>

  <filter-mapping>
  	<filter-name>CAS Authentication Filter</filter-name>
  	<url-pattern>/*</url-pattern>
  </filter-mapping>

  <filter-mapping>
  	<filter-name>CAS HttpServletRequest Wrapper Filter</filter-name>
  	<url-pattern>/*</url-pattern>
  </filter-mapping>

  <!--
  <servlet>
  	<servlet-name>ProxyValidate</servlet-name>
      <servlet-class> edu.yale.its.tp.cas.servlet.ProxyValidate</servlet-class>
  </servlet>


  <servlet> 
  	<servlet-name>ProxyTicketReceptor</servlet-name> 
  	<servlet-class>edu.yale.its.tp.cas.proxy.ProxyTicketReceptor</servlet-class> 
 	</servlet > 

 	<servlet-mapping> 
  	<servlet-name>ProxyTicketReceptor</servlet-name> 
   	<url-pattern>/CasProxyServlet </url-pattern> 
 	</servlet-mapping >
  -->
  <welcome-file-list>
  	<welcome-file>
  		index.jsp
      </welcome-file>
  </welcome-file-list>
  </web-app>

      *注意：

      • “CAS Validation Filter”需要放在“CAS Authentication Filter”之前

      • 此代理非彼代理

        网上一些文章说的需要配置诸如：

        1. “SingleSignOutHttpSessionListener”
        2. “SingleSignOutFilter”
        3. “ticketValidatorClass”
        4. “ProxyValidate”
        5. “ProxyTicketReceptor”

      均不需要

      • 如果误配了SingleSignOutFilter，会出现异常

        Caused by: java.io.IOException: Server returned HTTP response code: 500 for URL: https://proxy.sso.hoau.com:443/cas/proxyValidate?ticket=ST-31-TM9EbFoQbasNdXh11HaJ-cas01.sso.hoau.com&service=https%3A%2F%2Fapp2.hoau.com%3A8423%2Fcas2%3Bjsessionid%3D0CEB865B53E64FF31BF02A496DF73860.tomcat2

        at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1840)
  at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1441)
  at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:254)
  at org.jasig.cas.client.util.CommonUtils.getResponseFromServer(CommonUtils.java:429)
  ... 24 more

      如果为了在https下录制自动化测试脚本，会修改classpath下/Library/Java/JavaVirtualMachines/jdk1.8.0_65.jdk/Contents/Home/jre/lib/security的java.security文件，那么也可能出现类似的错误。

    • https://app2.hoau.com:8423

      web.xml配置同上

      *注意：修改端口

  • CAS服务器（Tomcat x 1）

测试

*1. 访问“https://app1.hoau.com:8413/cas1”

会重定向到“https://proxy.sso.hoau.com/cas/login?service=https%3A%2F%2Fapp1.hoau.com%3A8413%2Fcas1”

*2. 然后输入用户明密码（test01/psw01）

如果验证成功，则会将浏览器重定向到app1的登陆成功页面。

*3. 再次访问“https://app1.hoau.com:8413/cas1”

可以直接进入登陆成功页，而无需输入用户名密码。

*4. 访问另一应用

同样可以通过test01用户直接进入登陆成功页，而无需输入用户名密码。

代理下的网络顺序分析

参照另一文章：（待出）

源代码

还在准备，如果需要的童鞋请留言。

结束

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/richaaaard/p/5053108.html