ubuntu12下安装skyeye1.3.2
1.首先安装skyeye的依赖包，比如gtk的依赖，一般
Ubuntu 都默认安装了，稳妥起见，运行下面的代码：
|
sudo apt-get install libgtk2.0-dev pkg-config libatk1.0-dev libpango1.0-dev libfreetype6-dev libglib2.0-dev libx11-dev binutils-dev
|
2.安装skyeye
|
sudo apt-get install skyeye
|
3.在终端下执行skyeye，运行出错
|
skyeye: error while loading shared libraries: libbfd-2.19.90.20090909.so: cannot open shared object file: No such file or directory
|
在ubuntu 10.04LTS中，libbfd的版本是libbfd-2.20.1-system.20100303.so，把libbfd-2.20.1-system.20100303.so拷贝一份，然后将文件名改成libbfd- 2.19.90.20090909.so就可以了。libbfd-2.20.1-system.20100303.so在/usr/lib目录下。
|
sudo cp /usr/lib/libbfd-2.20.1-system.20100303.so /usr/lib/libbfd-2.19.90.20090909.so
sudo mv /usr/lib/libbfd-2.20.1-system.20100303.so /usr/lib/libbfd-2.20.so.bak
|
然后终端下输入skyeye，得到如下启动信息：
|
**************************** WARNING **********************************
If you want to run ELF image, you should use -e option to indicate
your elf-format image filename. Or you only want to run binary image,
you need to set the filename of the image and its entry in skyeye.conf.
***********************************************************************
Your elf file is little endian.
Failed to open skyeye config file skyeye.conf in the same directory
error: No such file or directory
SkyEye 1.2.5
Bug report: skyeye-developer@lists.gro.clinux.org
Usage: skyeye [options] -e program [program args]
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-l load_address,load_address_mask
Load ELF file to another address, not its entry.
-b specify the data type is big endian when non "-e" option.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h The SkyEye command options, and ARCHs and CPUs simulated.
------------------------------------------------------------------
----------- Architectures and CPUs simulated by SkyEye-------------
-------- ARM architectures ---------
at91
lpc
s3c4510b
s3c44b0x
s3c44b0
s3c3410x
ep7312
lh79520
ep9312
cs89712
sa1100
pxa_lubbock
pxa_mainstone
at91rm92
s3c2410x
s3c2440
sharp_lh7a400
ns9750
-------- BlackFin architectures ----
bf533
bf537
|
启动成功。。。
转自：http://blog.chinaunix.net/uid-11829250-id-337283.html
我自己的Ubuntu是12，最好下载最新的Ubuntu，不然apt-get会出错，因为旧的Ubuntu不支持了。本文是最简单的Skyeye的安装方法。
目前没有mini2440还未到手，只能先模拟运行padgin软件。
————————————签名——————————————
你必须相信点滴的进步会连接着你的未来，否则，你就没有未来。
————————————进展——————————————
没有硬件，只能先用软件模拟。不顺利，牵扯的太多。