11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases (文档 ID 1312749.1)

In this Document

Purpose

Scope

Details

Concepts & Overview

Administrator-managed Database

Basic Method

Preconnect Method

Policy-managed Database

Basic Method

Applies to:

Oracle Database - Enterprise Edition - Version 11.2.0.1 to 11.2.0.3 [Release 11.2]
Oracle Net Services - Version 11.2.0.1 to 11.2.0.3 [Release 11.2]
Information in this document applies to any platform.

Purpose

This article describes Transparent Application Failover (TAF) and provides configuration details for 11gR2(11.2) cluster database.

Scope

This article is intended for Oracle Cluster Administrators who would like more details about TAF. Basic understanding of Oracle Clusterware Database is assumed.

Details

Concepts & Overview

TAF allows Oracle clients to reconnect to a surviving instance in the event of a failure of the instance to which it is connected. There are two types of TAF available, SESSION and SELECT.

SESSION: Session Failover re-creates the connections and sessions to the surviving instance.
SELECT: In addition to recreating the session, Select Failover also replays the queries that were in progress.

There are two methods in which TAF estabilishes the failover connection, BASIC and PRECONNECT.

BASIC: The second connection is re-established only after the first connection to the instance failed.
PRECONNECT: Two connections are established when the client logs in to the database. A login to database will create two connection at the same time. For this to work, clusterware actually starts two services. One main service and another shadow service.

TAF can be configured at the Oracle Client side in tnsnames.ora or at the Database Server side using the SRVCTL utility. Configuring it at the server is preferred as it is convenient to put the configuration in one place i.e. on the server. This article covers the configuration at the server using SRVCTL. TAF configuration is associated with the database service.

1. Create the service with SRVCTL
SRVCTL defines services in OCR which is accessible across nodes. The service configuration details can be viewed with the SRVCTL config service command.

2. Start the Service with SRVCTL
When the service is started with SRVCTL, it actually creates a service in the database. The service name and the configuration details of the service created at the database can be viewed with DBA_SERVICES view. Then the SERVICE_NAMES database parameter is set, which allows PMON to register this service with the listener. Once the new service is registered, remote client connections can established through the listener.

NOTE:
The clusterware automatically starts/stops and manages the services in the database according to the configuration of the service. Manually setting the SERVICE_NAMES parameter in RAC is not allowed as clusterware manages setting this parameter.

Let's have a look at the srvctl syntax for creating service. Databases in 11gR2 can be Administrator-managed or Policy-managed. Certain options can be used only with certain type of database.

srvctl add service -d <db_unique_name> -s <service_name>
-r "<preferred_list>" [-a "<available_list>"] [-P {BASIC | NONE | PRECONNECT}]
-g <server_pool> [-c {UNIFORM | SINGLETON}]
[-k <net_num>]
[-l [PRIMARY][,PHYSICAL_STANDBY][,LOGICAL_STANDBY][,SNAPSHOT_STANDBY]]
[-y {AUTOMATIC | MANUAL}]
[-q {TRUE|FALSE}]
[-x {TRUE|FALSE}]
[-j {SHORT|LONG}]
[-B {NONE|SERVICE_TIME|THROUGHPUT}]
[-e {NONE|SESSION|SELECT}]
[-m {NONE|BASIC}]
[-z <failover_retries>]
[-w <failover_delay>]

Here is the description of the options that we are going to use in configuring TAF.

-r "<preferred_list>" [-a "<available_list>"] [-P {BASIC | NONE | PRECONNECT}]
         This clause is valid only for Administrator-managed database which support PRECONNECT method.
-g <server_pool> [-c {UNIFORM | SINGLETON}]
         This clause is valid only for Policy-managed database where in PRECONNECT method is not available.

The above two options instruct clusterware on how to handle this service.

[-e {NONE|SESSION|SELECT}]
        This defines the type of TAF whether SESSION or SELECT.
[-m {NONE|BASIC}]
        This defines the method of TAF.
[-z <failover_retries>]
        This defines the the number of times to attempt to connect after a failover.
[-w <failover_delay>]
       This defines the amount of time in seconds to wait between connect attempts.

Above four options are passed to database while starting up the service and is viewable in DBA_SERVICES view.

Administrator-managed Database

Basic Method

1. Create Service

Syntax:
          srvctl add service -d <db_unique_name> -s <service_name>
          -r "<preferred_list>" [-a "<available_list>"] [-P {BASIC | NONE | PRECONNECT}]
         [-e {NONE|SESSION|SELECT}]
         [-m {NONE|BASIC}]
         [-z <failover_retries>]
         [-w <failover_delay>]

Example:
         $ srvctl add service -d db112 -s mysrvb -r db1121,db1122 -P basic -e select -m basic -z 10 -w 2

Though this example only uses -r option, you can use both -r and -a option.

2. Start the service
$ srvctl start service -d db112 -s mysrvb

Check if the service is registered with the listener.

$lsnrctl status LISTENER_SCAN1
. . .
. . .
Service "mysrvb" has 2 instance(s).
Instance "db1121", status READY, has 1 handler(s) for this service...
Instance "db1122", status READY, has 1 handler(s) for this service...
. . .
. . .

3. Make a connection.

The client connect string does not require any special TAF parameters. A simple tnsnames.ora entry as shown below will do.

mysrvb =
(description =
   (address = (protocol=tcp)(host=secrac-scan)(port=1521))
   (connect_data=
    (service_name=mysrvb)
   )
)

Note: Please be aware that pre-11gR2 clients are not fully compatible with SCAN and require a special TNS connect string. See the following Oracle Documentation: http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf

$ sqlplus scott/tiger@mysrvb

Once connected GV$SESSION view will reflect the connection made is TAF enabled. The FAILOVER_METHOD and FAILOVER_TYPE column reflects it and this confirms the TAF configuration is correct.

SQL> select inst_id,username,service_name,failover_type,failover_method,failed_over from gv$session where username='SCOTT';

INST_ID USERNAME SERVICE_NAME FAILOVER_TYPE FAILOVER_M FAI
------- -------- ------------ ------------- ---------- ---
1 SCOTT mysrvb SELECT BASIC NO

Note that this client has connected to the instance 1 with BASIC method and SELECT type.

Preconnect Method

1. Create service

Syntax:
           srvctl add service -d <db_unique_name> -s <service_name>
          -r "<preferred_list>" [-a "<available_list>"] [-P {BASIC | NONE | PRECONNECT}]
          [-e {NONE|SESSION|SELECT}]
          [-m {NONE|BASIC}]

Example:
          $ srvctl add service -d db112 -s mysrv -r db1121 -a db1122 -P preconnect

NOTE:
* The -e, -m option should be set to none. Omitting this option actually sets it to none.
* Use both -r and -a option for preconnect so that a shadow service will be started.

2. Start the service.

$ srvctl start service -d db112 -s mysrv

Preconnect creates an additional shadow service.

$ crsctl stat res -t
. . .
. . .
ora.db112.mysrv.svc
1 ONLINE ONLINE secrac1
ora.db112.mysrv_preconnect.svc
1 ONLINE ONLINE secrac3
. . .
. . .

Note that the service 'mysrv' is started on the preferred instance. And the shadow service 'mysrv_preconnect' is started on the available instance. The shadow service is always defined as <servicename>_preconnect.

Check if the service is correctly registered with the listener.

$ lsnrctl status listener_scan1
. . .
. . .
Service "mysrv" has 1 instance(s).
Instance "db1121", status READY, has 1 handler(s) for this service...
Service "mysrv_preconnect" has 1 instance(s).
Instance "db1122", status READY, has 1 handler(s) for this service...
. . .
. . .

3. Define TNS entry.

Preconnect requires special parameters at the client side tnsnames.ora file. The TAF Type and the TAF method is actually specified at the client end.

mysrv =
(description =
   (address = (protocol=tcp)(host=secrac-scan)(port=1521))
   (connect_data=
     (service_name=mysrv)
     (failover_mode=
       (backup=mysrv_preconnect)
       (type=select)
       (method=preconnect)
     )
   )
)

mysrv_preconnect =
(description =
   (address = (protocol=tcp)(host=secrac-scan)(port=1521))
   (connect_data=(service_name=mysrv_preconnect))
)

Connect to the database with this tns entry

$sqlplus scott/tiger@mysrv

SQL> select inst_id,username,service_name,failover_type,failover_method,failed_over from gv$session where username='SCOTT';

INST_ID USERNAME     SERVICE_NAME FAILOVER_TYPE FAILOVER_M FAI
------- -------- ---------------- ------------- ---------- ---
      1    SCOTT        mysrv        SELECT PRECONNECT NO
      2    SCOTT mysrv_preconnect          NONE       NONE NO

Note that the client has made two connections. The first one is the active main connection with PRECONNECT method and SELECT type. The second one is the shadow connection that will be used if the connection to the first instance fails.

Policy-managed Database

Basic Method

1. Create the service

Syntax:
          srvctl add service -d <db_unique_name> -s <service_name>
          -g <server_pool> [-c {UNIFORM | SINGLETON}]
          [-e {NONE|SESSION|SELECT}]
          [-m {NONE|BASIC}]
          [-z <failover_retries>]
          [-w <failover_delay>]

Example:
         $ srvctl add service -d db1 -s mysrvp -g mysrvpool -c uniform -e select -m basic -z 10 -w 2

2. Start the service

$ srvctl start service -d db1 -s mysrvp

Check if the service is correctly registered with the listener

$ lsnrctl status listener_scan1
. . .
. . .
Service "mysrvp" has 2 instance(s).
Instance "db1_1", status READY, has 1 handler(s) for this service...
Instance "db1_2", status READY, has 1 handler(s) for this service...
. . .
. . .

3. Make a connection.

The client connect string does not require any special TAF parameters. A simple tnsnames.ora entry as shown below will do.

mysrvp =
(description =
   (address = (protocol=tcp)(host=secrac-scan)(port=1521))
   (connect_data=
     (service_name=mysrvp)
   )
)

$ sqlplus scott/tiger@mysrvp