libusb 批传输的使用方法

概述

libusb是开发与USB外围设备通讯应用程序的好帮手，其API精益且功能强大，完备内容可以查看接口文档和库提供的examples示例程序。

自己使用较多的是USB批量传输类型，在此记录下有关批量传输通讯需要的一些步骤。代码适用于存在批量传输端点的USB设备。

数据结构

  1. 查找设备的标识
struct bulkusbid 
{
	unsigned short vid;
	unsigned short pid;
};
  1. 一些必须参数
struct bulkusbdev
{
	libusb_device_handle* handle;
	uint8_t endpoint_in;
	uint8_t endpoint_out;
	uint8_t bus;
	uint8_t addr;
	int nb_ifaces;
};

初始化和退出

int bulkusb_init()
{
	return libusb_init(NULL);
}

void bulkusb_exit()
{
	libusb_exit(NULL);
}

查找设备

同一产品多个设备它们的pid、vid都是一样的，这里获取这个id下的所有设备以备选择。

int bulkusb_get_list(struct bulkusbdev dev_list[], int dev_max_cnt, struct bulkusbid id_list[], unsigned int id_cnt)
{
	int dev_cnt = 0;
	struct libusb_device_descriptor desc;
	libusb_device** devs;
	ssize_t cnt;
	int r, i;
	unsigned int j;

	cnt = libusb_get_device_list(NULL, &devs);
	if (cnt < 0)
		return (int)cnt;

	for (i = 0; devs[i]; ++i)
	{
		if (dev_cnt >= dev_max_cnt)
		{
			break;
		}

		r = libusb_get_device_descriptor(devs[i], &desc);
		if (r < 0)
		{
			fprintf(stderr, "failed to get device descriptor");
			return r;
		}

		for (j = 0; j < id_cnt; j++)
		{
			if (id_list[j].vid == desc.idVendor &&
				id_list[j].pid == desc.idProduct)
			{
				dev_list[dev_cnt].bus = libusb_get_bus_number(devs[i]);
				dev_list[dev_cnt].addr = libusb_get_device_address(devs[i]);
				dev_cnt++;
			}
		}
	}

	libusb_free_device_list(devs, 1);

	return dev_cnt;
}

打开设备

这部分代码主要有以下作用：

  1. 获取批量读写所需的必须参数 句柄、输入端点、输出端点；
  2. 清除端点的暂停标志并重新；
  3. 声明接口，这些接口关闭时要释放；
  4. 重新初始化设备；

这里获取端点需要注意的几点是：

  1. 只查找第一个设备配置描述符；
  2. 只查找厂商自定义类型接口或者CDC类型接口；
  3. 只使用找到的第一个输入输出端点；
  4. 如果已知输入输出端点，也可以直接写定它们的值，不使用查找的方法；
int bulkusb_open(struct bulkusbdev* bdev)
{
	libusb_device** devs;
	ssize_t cnt;
	int r, i;

	cnt = libusb_get_device_list(NULL, &devs);
	if (cnt < 0)
	{
		printf("

libusb error: %s
", libusb_strerror((enum libusb_error)cnt));
		return (int)cnt;
	}

	libusb_device* dev = NULL;
	libusb_device_handle* handle = NULL;

	for (i = 0; devs[i]; ++i)
	{
		dev = devs[i];
		if (bdev->bus == libusb_get_bus_number(devs[i])
			&& bdev->addr == libusb_get_device_address(devs[i]))
		{
			//获得句柄
			if (1)
			{
				r = libusb_open(dev, &handle);
				if (LIBUSB_SUCCESS != r)
				{
					libusb_free_device_list(devs, 1);
					printf("

libusb error: %s
", libusb_strerror((enum libusb_error)r));
					return r;
				}
				bdev->handle = handle;//赋值
			}

			//获得通讯端点并声明内核接口
			if (1)
			{
				int i, j, k;
				struct libusb_config_descriptor* conf_desc;
				const struct libusb_endpoint_descriptor* endpoint;
				uint8_t endpoint_in = 0, endpoint_out = 0;	// default IN and OUT endpoints
				int iface, nb_ifaces;
				uint8_t interfaceClass;

				libusb_get_config_descriptor(dev, 0, &conf_desc);//uint8_t config_index = 0;
				nb_ifaces = conf_desc->bNumInterfaces;
				bdev->nb_ifaces = nb_ifaces;//赋值
				for (i = 0; i < nb_ifaces; i++) {
					for (j = 0; j < conf_desc->interface[i].num_altsetting; j++) {
						//只获取接口类别为：厂商自定义类（0xFF）和CDC数据类（0xA）
						interfaceClass = conf_desc->interface[i].altsetting[j].bInterfaceClass;
						if (interfaceClass != 0xFF && interfaceClass != 0x0A){
							continue;
						}
						for (k = 0; k < conf_desc->interface[i].altsetting[j].bNumEndpoints; k++) {
							struct libusb_ss_endpoint_companion_descriptor* ep_comp = NULL;
							endpoint = &conf_desc->interface[i].altsetting[j].endpoint[k];
							// Use the first bulk IN/OUT endpoints as default for testing
							if ((endpoint->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) & (LIBUSB_TRANSFER_TYPE_BULK)) {//只获取批量传输端点
								if (endpoint->bEndpointAddress & LIBUSB_ENDPOINT_IN) {
									if (!endpoint_in)
									{
										endpoint_in = endpoint->bEndpointAddress;
										bdev->endpoint_in = endpoint_in;//赋值
										libusb_clear_halt(handle, bdev->endpoint_in);//清除暂停标志
									}
								}
								else {
									if (!endpoint_out)
									{
										endpoint_out = endpoint->bEndpointAddress;
										bdev->endpoint_out = endpoint_out;//赋值
										libusb_clear_halt(handle, bdev->endpoint_out);
									}
								}
							}
						}
					}
				}

				libusb_free_config_descriptor(conf_desc);

				libusb_set_auto_detach_kernel_driver(handle, 1);
				for (iface = 0; iface < nb_ifaces; iface++)
				{
					r = libusb_claim_interface(handle, iface);
					if (r != LIBUSB_SUCCESS) {
						printf("   Failed.
");
					}
				}
			}
		}
	}

	libusb_free_device_list(devs, 1);

	if (bdev->endpoint_in == 0 || bdev->endpoint_out == 0)
	{
		printf("*   Failed:endpoint_in or endpoint_out is NULL!
");
		return -99;
	}
	//重新初始化
	libusb_reset_device(bdev->handle);
	return 0;
}

关闭设备

int bulkusb_close(struct bulkusbdev* bdev)
{
	if (bdev->handle)
	{
		int iface;
		for (iface = 0; iface < bdev->nb_ifaces; iface++) {
			printf("Releasing interface %d...
", iface);
			libusb_release_interface(bdev->handle, iface);
		}

		libusb_close(bdev->handle);
	}

	return 0;
}

批量写

int bulkusb_write(struct bulkusbdev* dev, void* buffer, int len, int ms)
{
	int size, errcode;
	libusb_device_handle* handle = dev->handle;
	uint8_t endpoint_out = dev->endpoint_out;

	errcode = libusb_bulk_transfer(handle, endpoint_out, buffer, len, &size, ms);
	if (errcode<0)
	{
		printf("write:   %s
", libusb_strerror((enum libusb_error)errcode));
		return -1;
	}

	return size;
}

批量读

int bulkusb_read(struct bulkusbdev* dev, void* buffer, size_t len, int ms)
{
	int size, errcode;
	libusb_device_handle* handle = dev->handle;
	uint8_t endpoint_in = dev->endpoint_in;

	errcode = libusb_bulk_transfer(handle, endpoint_in, buffer, len, &size, ms);
	if (errcode < 0)
	{
		printf("read:   %s
", libusb_strerror((enum libusb_error)errcode));
		return -1;
	}

	return size;
}

步骤执行顺序

	char buf[8] = { 0 };
	struct bulkusbdev* dev = NULL;
	struct bulkusbdev devs[2] = { 0 };
	struct bulkusbid ids[1] = {
		{
			.vid = 0x1234,
			.pid = 0x1122
		}
	};

	bulkusb_init();
	bulkusb_get_list(devs, 2, ids, 1);
	dev = &devs[0];
	bulkusb_open(dev);
	bulkusb_write(dev, buf, 8, 1000);
	bulkusb_read(dev, buf, 8, 1000);
	bulkusb_close(dev);
	bulkusb_exit();
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/llil/p/13533074.html