k8s HA master 节点宕机修复

k8s 集群

# k8s 集群
192.168.71.201 k8s-master01 master01
192.168.71.202 k8s-master02 master02 harbor
192.168.71.203 k8s-master03 master03
192.168.71.204 k8s-node01  node01
192.168.71.205 k8s-node02  node02


k8s-master01   Ready      master   170m   v1.16.0
k8s-master02   Ready      master   167m   v1.16.0
k8s-master03   Ready      master   164m   v1.16.0
k8s-node01     Ready      <none>   162m   v1.16.0
k8s-node02     Ready      <none>   162m   v1.16.0


集群虚拟ip 192.168.71.200
k8s 高可用集群部署参照之前文档: https://www.cnblogs.com/lixinliang/p/12217033.html

故障重现

#制造故障
将第一个master 节点关机
因check_haproxy.sh  脚本，虚拟ip会漂移至 master02 节点

故障恢复

# 获取etcd 集群故障 etcd member  id
首先在一台健康的master02 上运行下面的命令获取etcd集群中故障member的ID
ETCD=`docker ps|grep etcd|grep -v POD|awk '{print $1}'`
docker exec 
  -it ${ETCD} 
  etcdctl 
  --endpoints https://127.0.0.1:2379 
  --ca-file /etc/kubernetes/pki/etcd/ca.crt 
  --cert-file /etc/kubernetes/pki/etcd/peer.crt 
  --key-file /etc/kubernetes/pki/etcd/peer.key 
  cluster-health

结果显示报错：  member 19c5f5e4748dc98b is unreachbel
那么故障id 为： 19c5f5e4748dc98b 

#删除故障etcd  member  id
由于故障节点已经被重置，因此相当于该ID对应的ETCD实例已经丢失，无法再取得联系。因此直接运行下面命令将故障的member从etcd集群中删除。

ETCD=`docker ps|grep etcd|grep -v POD|awk '{print $1}'`

docker exec 
  -it ${ETCD} 
  etcdctl 
  --endpoints https://127.0.0.1:2379 
  --ca-file /etc/kubernetes/pki/etcd/ca.crt 
  --cert-file /etc/kubernetes/pki/etcd/server.crt 
  --key-file /etc/kubernetes/pki/etcd/server.key 
  member remove 19c5f5e4748dc98b


# 再次查看etcd 集群状态
再次查看只剩下两个etcd 节点为 healthy 状态
docker exec 
  -it ${ETCD} 
  etcdctl 
  --endpoints https://127.0.0.1:2379 
  --ca-file /etc/kubernetes/pki/etcd/ca.crt 
  --cert-file /etc/kubernetes/pki/etcd/peer.crt 
  --key-file /etc/kubernetes/pki/etcd/peer.key 
  cluster-health

# 加入新节点

+ 基础配置 
* 主机名修改为master01 原来主机名
* /etc/hosts 文件保持同步
* 免密登录


+ 准备 keepalived、haproxy 配置文件
直接拷贝原来 master01 的相关配置，并启动服务

+ 分发证书
在 master02 节点分发证书至 master01


#!/bin/bash
for index in 201; do
  ip=192.168.71.${index}
  ssh $ip "mkdir -p /etc/kubernetes/pki/etcd; mkdir -p ~/.kube/"
  scp /etc/kubernetes/pki/ca.crt $ip:/etc/kubernetes/pki/ca.crt
  scp /etc/kubernetes/pki/ca.key $ip:/etc/kubernetes/pki/ca.key
  scp /etc/kubernetes/pki/sa.key $ip:/etc/kubernetes/pki/sa.key
  scp /etc/kubernetes/pki/sa.pub $ip:/etc/kubernetes/pki/sa.pub
  scp /etc/kubernetes/pki/front-proxy-ca.crt $ip:/etc/kubernetes/pki/front-proxy-ca.crt
  scp /etc/kubernetes/pki/front-proxy-ca.key $ip:/etc/kubernetes/pki/front-proxy-ca.key
  scp /etc/kubernetes/pki/etcd/ca.crt $ip:/etc/kubernetes/pki/etcd/ca.crt
  scp /etc/kubernetes/pki/etcd/ca.key $ip:/etc/kubernetes/pki/etcd/ca.key
  scp /etc/kubernetes/admin.conf $ip:/etc/kubernetes/admin.conf
  scp /etc/kubernetes/admin.conf $ip:~/.kube/config
done


+ 在 master01 准备 kubeadm_master01.conf 配置文件
随后将新的（初始化过的）节点加入到集群中，重新组成三节点的HA master，注意重建master的过程中使用了kubeadm的配置文件，该配置文件为HA master首次部署过程中使用过的，此处直接复用该配置文件。

注意： 以下文件需要修改两处地方，不能拿原来配置文件直接使用

$ cat kubeadm_master01.conf
apiVersion: kubeadm.k8s.io/v1beta1
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.71.201
  bindPort: 6443
---
apiVersion: kubeadm.k8s.io/v1beta1
kind: ClusterConfiguration
kubernetesVersion: v1.16.0
controlPlaneEndpoint: "192.168.71.200:8443"
imageRepository: registry.aliyuncs.com/google_containers
apiServer:
  certSANs:
  - "master01"
  - "master02"
  - "master03"
  - 192.168.71.201
  - 192.168.71.202
  - 192.168.71.203
  - 192.168.71.200
networking:
  podSubnet: "10.244.0.0/16"
  serviceSubnet: "10.96.0.0/12"
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes

etcd:
  local:
    extraArgs:
      listen-client-urls: "https://127.0.0.1:2379,https://192.168.71.201:2379"
      advertise-client-urls: "https://192.168.71.201:2379"
      listen-peer-urls: "https://192.168.71.201:2380"
      initial-advertise-peer-urls: "https://192.168.71.201:2380"
      initial-cluster: "k8s-master01=https://192.168.71.201:2380,k8s-master02=https://192.168.71.202:2380,k8s-master03=https://192.168.71.203:2380"  
# 第一处： 注意上一行需要修改，确保包括该重置节点在内的所有etcd节点的HOST=IP地址对都被列出在该配置中，不然新节点的etcd启动失败

      initial-cluster-state: existing
# 第二处： 注意上一行需要修改，因为是集群已经存在，所以将刚开始的 new 修改为existing ,如果损坏的master 节点不是master01,那么此处将不用修改 

    serverCertSANs:
      - master01
      - 192.168.71.201
    peerCertSANs:
      - master01
      - 192.168.71.201
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs


在 master01 执行：
# 配置证书
kubeadm init phase certs all --config kubeadm_master01.conf
# 配置etcd
kubeadm init phase etcd local --config kubeadm_master01.conf
# 生成kubelet配置文件
kubeadm init phase kubeconfig kubelet --config kubeadm_master01.conf
# 启动kubelet
kubeadm init phase kubelet-start --config kubeadm_master01.conf
# 将master01的etcd加入集群


 kubectl exec -n kube-system  etcd-k8s-master02 -- etcdctl --ca-file /etc/kubernetes/pki/etcd/ca.crt --cert-file /etc/kubernetes/pki/etcd/peer.crt --key-file /etc/kubernetes/pki/etcd/peer.key --endpoints=https://192.168.71.202:2379 member add master1 https://192.168.71.201:2380


# 启动 kube-apiserver、kube-controller-manager、kube-scheduler
kubeadm init phase kubeconfig all --config kubeadm_master01.conf
kubeadm init phase control-plane all --config kubeadm_master01.conf


# 将节点标记为master
kubeadm init phase mark-control-plane --config kubeadm_master01.conf

# 查看
kubectl get nodes



# 再次查看etcd 集群状态
[root@k8s-master02 ~]#  docker exec   -it ${ETCD}   etcdctl   --endpoints https://127.0.0.1:2379   --ca-file /etc/kubernetes/pki/etcd/ca.crt   --cert-file /etc/kubernetes/pki/etcd/peer.crt   --key-file /etc/kubernetes/pki/etcd/peer.key   cluster-health
member 858768c8e151d5d8 is healthy: got healthy result from https://192.168.71.202:2379
member c79fe8ecd577a746 is healthy: got healthy result from https://192.168.71.203:2379
member e2892a4ec808af4e is healthy: got healthy result from https://192.168.71.201:2379
cluster is healthy


正常显示 etcd 集群，证明mater01 已修复。
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/lixinliang/p/14346859.html