http response code

RFC 2616                        HTTP/1.1                       June 1999


   The first digit of the Status-Code defines the class of response. The
   last two digits do not have any categorization role. There are 5
   values for the first digit:

      - 1xx: Informational - Request received, continuing process

      - 2xx: Success - The action was successfully received,
        understood, and accepted

      - 3xx: Redirection - Further action must be taken in order to
        complete the request

      - 4xx: Client Error - The request contains bad syntax or cannot
        be fulfilled

      - 5xx: Server Error - The server failed to fulfill an apparently
        valid request

   The individual values of the numeric status codes defined for
   HTTP/1.1, and an example set of corresponding Reason-Phrase's, are
   presented below. The reason phrases listed here are only
   recommendations -- they MAY be replaced by local equivalents without
   affecting the protocol.

      Status-Code    =
            "100"  ; Section 10.1.1: Continue
          | "101"  ; Section 10.1.2: Switching Protocols
          | "200"  ; Section 10.2.1: OK
          | "201"  ; Section 10.2.2: Created
          | "202"  ; Section 10.2.3: Accepted
          | "203"  ; Section 10.2.4: Non-Authoritative Information
          | "204"  ; Section 10.2.5: No Content
          | "205"  ; Section 10.2.6: Reset Content
          | "206"  ; Section 10.2.7: Partial Content
          | "300"  ; Section 10.3.1: Multiple Choices
          | "301"  ; Section 10.3.2: Moved Permanently
          | "302"  ; Section 10.3.3: Found
          | "303"  ; Section 10.3.4: See Other
          | "304"  ; Section 10.3.5: Not Modified
          | "305"  ; Section 10.3.6: Use Proxy
          | "307"  ; Section 10.3.8: Temporary Redirect
          | "400"  ; Section 10.4.1: Bad Request
          | "401"  ; Section 10.4.2: Unauthorized
          | "402"  ; Section 10.4.3: Payment Required
          | "403"  ; Section 10.4.4: Forbidden
          | "404"  ; Section 10.4.5: Not Found
          | "405"  ; Section 10.4.6: Method Not Allowed
          | "406"  ; Section 10.4.7: Not Acceptable



Fielding, et al.            Standards Track                    [Page 40]

RFC 2616                        HTTP/1.1                       June 1999


          | "407"  ; Section 10.4.8: Proxy Authentication Required
          | "408"  ; Section 10.4.9: Request Time-out
          | "409"  ; Section 10.4.10: Conflict
          | "410"  ; Section 10.4.11: Gone
          | "411"  ; Section 10.4.12: Length Required
          | "412"  ; Section 10.4.13: Precondition Failed
          | "413"  ; Section 10.4.14: Request Entity Too Large
          | "414"  ; Section 10.4.15: Request-URI Too Large
          | "415"  ; Section 10.4.16: Unsupported Media Type
          | "416"  ; Section 10.4.17: Requested range not satisfiable
          | "417"  ; Section 10.4.18: Expectation Failed
          | "500"  ; Section 10.5.1: Internal Server Error
          | "501"  ; Section 10.5.2: Not Implemented
          | "502"  ; Section 10.5.3: Bad Gateway
          | "503"  ; Section 10.5.4: Service Unavailable
          | "504"  ; Section 10.5.5: Gateway Time-out
          | "505"  ; Section 10.5.6: HTTP Version not supported
          | extension-code

      extension-code = 3DIGIT
      Reason-Phrase  = *<TEXT, excluding CR, LF>
原文地址:https://www.cnblogs.com/lianghong881018/p/11003748.html