Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

一、问题描述

系统：CentOS 6.9

重启网卡后：service network restart报：

Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]；

原因是copy虚拟机造成的。使用vmworkstation打开虚拟机的时候，要选择copy而非move。

二、解决思路

1)、确认vmx配置文件的mac地址

2、确定第一步里的MAC地址和下面Mac地址相同时，

　　vim /etc/udev/rules.d/70-persistent-net.rules，查看ATTR{address}的值是否跟 ifconfig -a 里边 eth1的 HWaddr(物理地址)值相等，执行下面操作

　　1)、重命名/etc/sysconfig/network-scripts/ifcfg-eth0为ifcfg-eth0

　　2)、删除网卡配置文件里不必要的参数

　　)3、修改vim /etc/udev/rules.d/70-persistent-net.rules（注释eth0 网卡）

4、重启网络服务

三、解决方法

1、确认vmx配置文件的mac地址

ethernet0.generatedAddress = "00:0C:29:57:7F:85"    【在该虚拟机安装文件下】

2、修改70-persistent-net.rules

　　查看规则文件(vim /etc/udev/rules.d/70-persistent-net.rules)；确定里面的Mac地址和上面第一步存在相同的Mac地址（若不存在相同的Mac地址，则手动创建一个和上面一样的Mac地址）

[root@db01 ~]# vim /etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x100f (e1000)   【由于该网卡Mac地址和上面不匹配，则注销该网卡信息】
# SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:9d:d1:26",ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x100f (e1000)   
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:57:7f:85", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

[root@db01 ~]# ifconfig -a
eth1      Link encap:Ethernet  HWaddr 00:0C:29:57:7F:85  
          inet addr:10.0.0.8  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe57:7f85/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:97 errors:0 dropped:0 overruns:0 frame:0
          TX packets:129 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:11501 (11.2 KiB)  TX bytes:20472 (19.9 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:29 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:2219 (2.1 KiB)  TX bytes:2219 (2.1 KiB)

3、重命名网卡

[root@db01 ~]# mv /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth1

4、修改网卡配置文件

[root@db01 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0
#修改参数和删除无用参数
DEVICE="eth1"
TYPE=Ethernet
BOOTPROTO="dhcp"
ONBOOT=yes
HWADDR="00:0C:29:57:7F:85"

5、重启网卡

[root@db01 ~]# service network restart