原文链接：https://blog.csdn.net/kanpiaoxue/article/details/84927077
有些场景需要我们对一些异常情况下面的任务进行重试，比如：调用远程的RPC服务，可能由于网络抖动出现第一次调用失败，尝试几次就可以恢复正常。
spring-retry是spring提供的一个基于spring的重试框架，非常好用。
官网地址： https://github.com/spring-projects/spring-retry
下面是springboot调用spring-retry：
配置依赖Maven：
<dependency>
<groupId>org.springframework.retry</groupId>
<artifactId>spring-retry</artifactId>
</dependency>
启动类：
@SpringBootApplication
@EnableTransactionManagement // 启注解事务管理
@EnableScheduling
@EnableRetry // 【注意这里】启用了重试功能
public class TestWebApplication {
public static void main(String[] args) {
SpringApplication.run(TestWebApplication.class, args);
}
}
重试部分的代码：
@Service
public class RetryServiceImpl implements RetryService {
private static final Logger LOGGER = LoggerFactory.getLogger(RetryServiceImpl.class);
private AtomicInteger count = new AtomicInteger(1);
@Override
@Retryable(value = { RemoteAccessException.class }, maxAttemptsExpression = "${retry.maxAttempts:10}",
backoff = @Backoff(delayExpression = "${retry.backoff:1000}"))
public void retry() {
LOGGER.info("start to retry : " + count.getAndIncrement());
throw new RemoteAccessException("here " + count.get());
}
@Recover
public void recover(RemoteAccessException t) {
LOGGER.info("SampleRetryService.recover:{}", t.getClass().getName());
}
}
【注意】@Recover 的用法。它要求它注释的方法的返回值必须和@Retryable的注释的方法返回值保持一致，否则@Recover 注释的方法不会被调用。它还有关于自己参数的使用要求。
更详细的@Recover 的使用说明，参考它的官网Javadoc，如下：
原文 写道
Recovery method can be supplied, in case you want to take an alternative code path when the retry is exhausted. Methods should be declared in the same class as the @Retryable and marked @Recover. The return type must match the @Retryable method. The arguments for the recovery method can optionally include the exception that was thrown, and also optionally the arguments passed to the orginal retryable method (or a partial list of them as long as none are omitted).
org.springframework.retry.annotation.Recover
@Import(value={RetryConfiguration.class})
@Target(value={METHOD, TYPE})
@Retention(value=RUNTIME)
@Documented
Annotation for a method invocation that is a recovery handler.
A suitable recovery handler has a first parameter of
type Throwable (or a subtype of Throwable)
and a return value of the same type as the @Retryable
method to recover from. The Throwable first argument
is optional (but a method without it will only
be called if no others match). Subsequent arguments
are populated from the argument list of the failed method in order.
Since:
2.0
Author:
Dave Syer
还可以自己写代码的方法定制化retry的使用，如下：
public static void main(String[] args) throws InterruptedException {
RetryTemplate template = new RetryTemplate();
TimeoutRetryPolicy policy = new TimeoutRetryPolicy();
policy.setTimeout(2000L);
SimpleRetryPolicy retryPolicy = new SimpleRetryPolicy();
retryPolicy.setMaxAttempts(5);
//template.setRetryPolicy(policy);
template.setRetryPolicy(retryPolicy);
String result = template.execute(context -> {
System.out.println("TestAll.main()1");
TimeUnit.SECONDS.sleep(1L);
throw new IllegalArgumentException();
}, context -> {
System.out.println("TestAll.main()2");
return "world";
});
System.out.println("result:" + result);
}
【注意】
interface RetryPolicy 它有很多的实现类可以使用。
下面是官网的原始内容：
This project provides declarative retry support for Spring applications. It is used in Spring Batch, Spring Integration, Spring for Apache Hadoop (amongst others).
Quick Start
Example:
@Configuration
@EnableRetry
public class Application {
@Bean
public Service service() {
return new Service();
}
}
@Service
class Service {
@Retryable(RemoteAccessException.class)
public void service() {
// ... do something
}
@Recover
public void recover(RemoteAccessException e) {
// ... panic
}
}
Call the "service" method and if it fails with a RemoteAccessException then it will retry (up to three times by default), and then execute the "recover" method if unsuccessful. There are various options in the @Retryable annotation attributes for including and excluding exception types, limiting the number of retries and the policy for backoff.
Building
Requires Java 1.7 and Maven 3.0.5 (or greater)
$ mvn install
Features and API
RetryTemplate
To make processing more robust and less prone to failure, sometimes it helps to automatically retry a failed operation in case it might succeed on a subsequent attempt. Errors that are susceptible to this kind of treatment are transient in nature. For example a remote call to a web service or RMI service that fails because of a network glitch or a DeadLockLoserExceptionin a database update may resolve themselves after a short wait. To automate the retry of such operations Spring Retry has the RetryOperations strategy. The RetryOperations interface looks like this:
public interface RetryOperations {
<T> T execute(RetryCallback<T> retryCallback) throws Exception;
<T> T execute(RetryCallback<T> retryCallback, RecoveryCallback<T> recoveryCallback)
throws Exception;
<T> T execute(RetryCallback<T> retryCallback, RetryState retryState)
throws Exception, ExhaustedRetryException;
<T> T execute(RetryCallback<T> retryCallback, RecoveryCallback<T> recoveryCallback,
RetryState retryState) throws Exception;
}
The basic callback is a simple interface that allows you to insert some business logic to be retried:
public interface RetryCallback<T> {
T doWithRetry(RetryContext context) throws Throwable;
}
The callback is executed and if it fails (by throwing an Exception), it will be retried until either it is successful, or the implementation decides to abort. There are a number of overloaded execute methods in the RetryOperations interface dealing with various use cases for recovery when all retry attempts are exhausted, and also with retry state, which allows clients and implementations to store information between calls (more on this later).
The simplest general purpose implementation of RetryOperations is RetryTemplate. It could be used like this
RetryTemplate template = new RetryTemplate();
TimeoutRetryPolicy policy = new TimeoutRetryPolicy();
policy.setTimeout(30000L);
template.setRetryPolicy(policy);
Foo result = template.execute(new RetryCallback<Foo>() {
public Foo doWithRetry(RetryContext context) {
// Do stuff that might fail, e.g. webservice operation
return result;
}
});
In the example we execute a web service call and return the result to the user. If that call fails then it is retried until a timeout is reached.
RetryContext
The method parameter for the RetryCallback is a RetryContext. Many callbacks will simply ignore the context, but if necessary it can be used as an attribute bag to store data for the duration of the iteration.
A RetryContext will have a parent context if there is a nested retry in progress in the same thread. The parent context is occasionally useful for storing data that need to be shared between calls to execute.
RecoveryCallback
When a retry is exhausted the RetryOperations can pass control to a different callback, the RecoveryCallback. To use this feature clients just pass in the callbacks together to the same method, for example:
Foo foo = template.execute(new RetryCallback<Foo>() {
public Foo doWithRetry(RetryContext context) {
// business logic here
},
new RecoveryCallback<Foo>() {
Foo recover(RetryContext context) throws Exception {
// recover logic here
}
});
If the business logic does not succeed before the template decides to abort, then the client is given the chance to do some alternate processing through the recovery callback.
Stateless Retry
In the simplest case, a retry is just a while loop: the RetryTemplate can just keep trying until it either succeeds or fails. The RetryContext contains some state to determine whether to retry or abort, but this state is on the stack and there is no need to store it anywhere globally, so we call this stateless retry. The distinction between stateless and stateful retry is contained in the implementation of the RetryPolicy (the RetryTemplate can handle both). In a stateless retry, the callback is always executed in the same thread on retry as when it failed.
Stateful Retry
Where the failure has caused a transactional resource to become invalid, there are some special considerations. This does not apply to a simple remote call because there is no transactional resource (usually), but it does sometimes apply to a database update, especially when using Hibernate. In this case it only makes sense to rethrow the exception that called the failure immediately so that the transaction can roll back and we can start a new valid one.
In these cases a stateless retry is not good enough because the re-throw and roll back necessarily involve leaving the RetryOperations.execute() method and potentially losing the context that was on the stack. To avoid losing it we have to introduce a storage strategy to lift it off the stack and put it (at a minimum) in heap storage. For this purpose Spring Retry provides a storage strategy RetryContextCache which can be injected into the RetryTemplate. The default implementation of the RetryContextCache is in memory, using a simple Map. It has a strictly enforced maximum capacity, to avoid memory leaks, but it doesn't have any advanced cache features like time to live. You should consider injecting a Map that had those features if you need them. Advanced usage with multiple processes in a clustered environment might also consider implementing the RetryContextCache with a cluster cache of some sort (though, even in a clustered environment this might be overkill).
Part of the responsibility of the RetryOperations is to recognize the failed operations when they come back in a new execution (and usually wrapped in a new transaction). To facilitate this, Spring Retry provides the RetryState abstraction. This works in conjunction with a special execute methods in the RetryOperations.
The way the failed operations are recognized is by identifying the state across multiple invocations of the retry. To identify the state, the user can provide an RetryState object that is responsible for returning a unique key identifying the item. The identifier is used as a key in the RetryContextCache.
Warning: Be very careful with the implementation of Object.equals() and Object.hashCode() in the key returned by RetryState. The best advice is to use a business key to identify the items. In the case of a JMS message the message ID can be used.
When the retry is exhausted there is also the option to handle the failed item in a different way, instead of calling the RetryCallback (which is presumed now to be likely to fail). Just like in the stateless case, this option is provided by the RecoveryCallback, which can be provided by passing it in to the execute method of RetryOperations.
The decision to retry or not is actually delegated to a regular RetryPolicy, so the usual concerns about limits and timeouts can be injected there (see below).
Retry Policies
Inside a RetryTemplate the decision to retry or fail in the execute method is determined by a RetryPolicy which is also a factory for the RetryContext. The RetryTemplate has the responsibility to use the current policy to create a RetryContextand pass that in to the RetryCallback at every attempt. After a callback fails the RetryTemplate has to make a call to the RetryPolicy to ask it to update its state (which will be stored in the RetryContext), and then it asks the policy if another attempt can be made. If another attempt cannot be made (e.g. a limit is reached or a timeout is detected) then the policy is also responsible for identifying the exhausted state, but not for handling the exception. The RetryTemplate will throw the original exception, except in the stateful case, when no recover is available, in which case it throws RetryExhaustedException. You can also set a flag in the RetryTemplate to have it unconditionally throw the original exception from the callback (i.e. from user code) instead.
Tip: Failures are inherently either retryable or not - if the same exception is always going to be thrown from the business logic, it doesn't help to retry it. So don't retry on all exception types - try to focus on only those exceptions that you expect to be retryable. It's not usually harmful to the business logic to retry more aggressively, but it's wasteful because if a failure is deterministic there will be time spent retrying something that you know in advance is fatal.
Spring Retry provides some simple general purpose implementations of stateless RetryPolicy, for example a SimpleRetryPolicy, and the TimeoutRetryPolicy used in the example above.
The SimpleRetryPolicy just allows a retry on any of a named list of exception types, up to a fixed number of times:
// Set the max attempts including the initial attempt before retrying
// and retry on all exceptions (this is the default):
SimpleRetryPolicy policy = new SimpleRetryPolicy(5, Collections.singletonMap(Exception.class, true));
// Use the policy...
RetryTemplate template = new RetryTemplate();
template.setRetryPolicy(policy);
template.execute(new RetryCallback<Foo>() {
public Foo doWithRetry(RetryContext context) {
// business logic here
}
});
There is also a more flexible implementation called ExceptionClassifierRetryPolicy, which allows the user to configure different retry behavior for an arbitrary set of exception types though the ExceptionClassifier abstraction. The policy works by calling on the classifier to convert an exception into a delegate RetryPolicy, so for example, one exception type can be retried more times before failure than another by mapping it to a different policy.
Users might need to implement their own retry policies for more customized decisions. For instance, if there is a well-known, solution-specific, classification of exceptions into retryable and not retryable.
Backoff Policies
When retrying after a transient failure it often helps to wait a bit before trying again, because usually the failure is caused by some problem that will only be resolved by waiting. If a RetryCallback fails, the RetryTemplate can pause execution according to the BackoffPolicy in place.
public interface BackoffPolicy {
BackOffContext start(RetryContext context);
void backOff(BackOffContext backOffContext)
throws BackOffInterruptedException;
}
A BackoffPolicy is free to implement the backOff in any way it chooses. The policies provided by Spring Retry out of the box all use Object.wait(). A common use case is to backoff with an exponentially increasing wait period, to avoid two retries getting into lock step and both failing - this is a lesson learned from the ethernet. For this purpose Spring Retry provides the ExponentialBackoffPolicy. There are also randomized versions delay policies that are quite useful to avoid resonating between related failures in a complex system.
Listeners
Often it is useful to be able to receive additional callbacks for cross cutting concerns across a number of different retries. For this purpose Spring Retry provides the RetryListener interface. The RetryTemplate allows users to register RetryListeners, and they will be given callbacks with the RetryContext and Throwable where available during the iteration.
The interface looks like this:
public interface RetryListener {
void open(RetryContext context, RetryCallback<T> callback);
void onError(RetryContext context, RetryCallback<T> callback, Throwable e);
void close(RetryContext context, RetryCallback<T> callback, Throwable e);
}
The open and close callbacks come before and after the entire retry in the simplest case and onError applies to the individual RetryCallback calls. The close method might also receive a Throwable; if there has been an error it is the last one thrown by the RetryCallback.
Note that when there is more than one listener, they are in a list, so there is an order. In this case open will be called in the same order while onError and close will be called in reverse order.
Declarative Retry
Sometimes there is some business processing that you know you want to retry every time it happens. The classic example of this is the remote service call. Spring Retry provides an AOP interceptor that wraps a method call in a RetryOperationsfor just this purpose. The RetryOperationsInterceptor executes the intercepted method and retries on failure according to the RetryPolicy in the provided RepeatTemplate.
Java Configuration for Retry Proxies
Add the @EnableRetry annotation to one of your @Configuration classes and use @Retryable on the methods (or type level for all methods) that you want to retry. You can also specify any number of retry listeners. Example
@Configuration
@EnableRetry
public class Application {
@Bean
public Service service() {
return new Service();
}
@Bean public RetryListener retryListener1() {
return new RetryListener() {...}
}
@Bean public RetryListener retryListener2() {
return new RetryListener() {...}
}
}
@Service
class Service {
@Retryable(RemoteAccessException.class)
public service() {
// ... do something
}
}
Attributes of @Retryable can be used to control the RetryPolicy and BackoffPolicy, e.g.
@Service
class Service {
@Retryable(maxAttempts=12, backoff=@Backoff(delay=100, maxDelay=500))
public service() {
// ... do something
}
}
for a random backoff between 100 and 500 milliseconds and up to 12 attempts. There is also a stateful attribute (default false) to control whether the retry is stateful or not. To use stateful retry the intercepted method has to have arguments, since they are used to construct the cache key for the state.
The @EnableRetry annotation also looks for beans of type Sleeper and other strategies used in the RetryTemplate and interceptors to control the beviour of the retry at runtime.
The @EnableRetry annotation creates proxies for @Retryable beans, and the proxies (so the bean instances in the application) have the Retryable interface added to them. This is purely a marker interface, but might be useful for other tools looking to apply retry advice (they should usually not bother if the bean already implements Retryable).
Recovery method can be supplied, in case you want to take an alternative code path when the retry is exhausted. Methods should be declared in the same class as the @Retryable and marked @Recover. The return type must match the @Retryable method. The arguments for the recovery method can optionally include the exception that was thrown, and also optionally the arguments passed to the orginal retryable method (or a partial list of them as long as none are omitted). Example:
@Service
class Service {
@Retryable(RemoteAccessException.class)
public void service(String str1, String str2) {
// ... do something
}
@Recover
public void recover(RemoteAccessException e, String str1, String str2) {
// ... error handling making use of original args if required
}
}
Version 1.2 introduces the ability to use expressions for certain properties:
@Retryable(exceptionExpression="#{message.contains('this can be retried')}")
public void service1() {
...
}
@Retryable(exceptionExpression="#{message.contains('this can be retried')}")
public void service2() {
...
}
@Retryable(exceptionExpression="#{@exceptionChecker.shouldRetry(#root)}",
maxAttemptsExpression = "#{@integerFiveBean}",
backoff = @Backoff(delayExpression = "#{1}", maxDelayExpression = "#{5}", multiplierExpression = "#{1.1}"))
public void service3() {
...
}
These use the familier Spring SpEL expression syntax (#{...}).
Expressions can contain property placeholders such as #{${max.delay}} or #{@exceptionChecker.${retry.method}(#root)}
exceptionExpression is evaluated against the thrown exception as the #root object.
maxAttemptsExpression and the @BackOff expression attributes are evaluated once, during initialization; there is no root object for the evaluation but they can reference other beans in the context.
XML Configuration
Here is an example of declarative iteration using Spring AOP to repeat a service call to a method called remoteCall (for more detail on how to configure AOP interceptors see the Spring User Guide):
<aop:config>
<aop:pointcut id="transactional"
expression="execution(* com..*Service.remoteCall(..))" />
<aop:advisor pointcut-ref="transactional"
advice-ref="retryAdvice" order="-1"/>
</aop:config>
<bean id="retryAdvice"
class="org.springframework.retry.interceptor.RetryOperationsInterceptor"/>
The example above uses a default RetryTemplate inside the interceptor. To change the policies or listeners, you only need to inject an instance of RetryTemplate into the interceptor.
Contributing
Spring Retry is released under the non-restrictive Apache 2.0 license, and follows a very standard Github development process, using Github tracker for issues and merging pull requests into master. If you want to contribute even something trivial please do not hesitate, but follow the guidelines below.
Before we accept a non-trivial patch or pull request we will need you to sign the https://cla.pivotal.io/[contributor'sagreement]. Signing the contributor's agreement does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do. Active contributors might be asked to join the core team, and given the ability to merge pull requests.
Code of Conduct
This project adheres to the Contributor Covenant. By participating, you are expected to uphold this code. Please report unacceptable behavior to spring-code-of-conduct@pivotal.io.