HDU 1950 Bridging signals

Bridging signals

Time Limit: 5000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others) Total Submission(s): 399    Accepted Submission(s): 250

Problem Description
'Oh no, they've done it again', cries the chief designer at the Waferland chip factory. Once more the routing designers have screwed up completely, making the signals on the chip connecting the ports of two functional blocks cross each other all over the place. At this late stage of the process, it is too expensive to redo the routing. Instead, the engineers have to bridge the signals, using the third dimension, so that no two signals cross. However, bridging is a complicated operation, and thus it is desirable to bridge as few signals as possible. The call for a computer program that finds the maximum number of signals which may be connected on the silicon surface without rossing each other, is imminent. Bearing in mind that there may be housands of signal ports at the boundary of a functional block, the problem asks quite a lot of the programmer. Are you up to the task? Figure 1. To the left: The two blocks' ports and their signal mapping (4,2,6,3,1,5). To the right: At most three signals may be routed on the silicon surface without crossing each other. The dashed signals must be bridged. 
A typical situation is schematically depicted in figure 1. The ports of the two functional blocks are numbered from 1 to p, from top to bottom. The signal mapping is described by a permutation of the numbers 1 to p in the form of a list of p unique numbers in the range 1 to p, in which the i:th number pecifies which port on the right side should be connected to the i:th port on the left side. Two signals cross if and only if the straight lines connecting the two ports of each pair do.
 
Input
On the first line of the input, there is a single positive integer n, telling the number of test scenarios to follow. Each test scenario begins with a line containing a single positive integer p<40000, the number of ports on the two functional blocks. Then follow p lines, describing the signal mapping: On the i:th line is the port number of the block on the right side which should be connected to the i:th port of the block on the left side.
 
Output
For each test scenario, output one line containing the maximum number of signals which may be routed on the silicon surface without crossing each other.
 
Sample Input
4 6 4 2 6 3 1 5 10 2 3 4 5 6 7 8 9 10 1 8 8 7 6 5 4 3 2 1 9 5 8 9 2 3 1 7 4 6
 
Sample Output
3
9
1
4
 
Source
 
Recommend
wangye
 
 
 
  1. /** 
  2. *d[i]存长度为i的上升子序列的最小末元素 
  3. *可以推出d[i]中的元素师按从小到大排列的, 
  4. *因为长度为i的序列中可以找到一个长度为i-1的序列,长度为i-1的序列的末元素一定比长度为i的序列的末元素小,上升子序列么 
  5. *若d[i-1]比d[i]大,则上述中的长度为i-1的序列的末元素可以更新它 
  6. *若当前元素最大,则长度增加 
  7. *否则找到一个他可以更新的,更新之 
  8. * 
  9. *题意:针脚之间有一些连线,有的交叉,现在不允许交叉,求最多能留下几根线 
  10. *以某一边为序,求一个最长上升子序列的长度即可,普通方法可能超时,所以用到二分 
  11. */
 1 #include<iostream>
 2 #include<cstdio>
 3 #include<cstring>
 4 
 5 using namespace std;
 6 
 7 const int maxn=40010;
 8 
 9 int num[maxn],d[maxn];
10 
11 int main(){
12 
13     //freopen("input.txt","r",stdin);
14 
15     int t,n;
16     scanf("%d",&t);
17     while(t--){
18         scanf("%d",&n);
19         for(int i=1;i<=n;i++)
20             scanf("%d",&num[i]);
21         d[1]=num[1];
22         int len=1,l,r,mid;
23         for(int i=2;i<=n;i++){
24             if(d[len]<num[i]){
25                 d[++len]=num[i];
26                 continue;
27             }
28             l=1,r=len;
29             while(l<=r){
30                 mid=(l+r)>>1;
31                 if(d[mid]<num[i])
32                     l=mid+1;
33                 else
34                     r=mid-1;
35             }
36             d[l]=num[i];
37         }
38         printf("%d\n",len);
39     }
40     return 0;
41 }
原文地址:https://www.cnblogs.com/jackge/p/3026330.html