ip addr add 10.9.8.100/24 broadcast + dev eth0
/etc/sysconfig/network-scripts/ifcfg-eth0
ifdown eth0 / ifup eth0
ftp session on /home/user/
/etc/sysconfig/network
nm-connection-editor
service kdump status
service kdump stop
chkconfig --level 345 kdump off
chkconfig --list kdump
useradd -c user user
passwd user
tar zxvf centos6-i386-initial-setup-1.8.0.tgz
cd centos6-i386-initial-setup-1.8.0
./install.sh
/usr/share/wireshark/init.lua
tar zxvf install-kernel-centos6-20131231.tgz
/etc/modprobe.d/blacklist.conf
lsusb.py
vi .bash_profile
nps/ue/license/
mv * /nps/ue/license/
/nps/ue/license/
rm -f register-info.bin
./get-register-info
./check-license license.bin
rm -f license.bin
chmod 755 ~/generate-license-private
~/generate-license-private register-info.bin
./check-license license.bin
ls conf/
./uemshuawei-1505-1.2.0 -v
mv lib/udev/rules.d/40-uems.rules /lib/udev/rules.d/
/etc/rc.d/rc.local
/nps/ue/bin/uems.sh
mv lib/modules/2.6.32-220.el6.nps131231.i686/extra/uedevinfomod.ko /lib/modules/2.6.32-220.el6.nps131231.i686/extra/
mv lib/modules/2.6.32-220.el6.nps131231.i686/kernel/drivers/net/usb/hw_cdc_driver.ko /lib/modules/2.6.32-220.el6.nps131231.i686/kernel/drivers/net/usb/
depmod -a
chkconfig --list mysqld
chkconfig --level 345 mysqld on
vi /etc/my.cnf
97 service mysqld start
98 mysqladmin -u root password 'root'
99 mysqladmin -h 127.0.0.1 -u root password 'root'
100 mysql -u root -p
101 chmod 777 /nps/ue/cases
102 useradd -c caseftp -d /nps/ue/cases -s /sbin/nologin -M caseftp
103 passwd caseftp
104 vi /etc/vsftpd/vsftpd.conf
105 vi /etc/vsftpd/chroot_list
106 service vsftpd restart
107 mv etc/rc.d/init.d/ipmedia /etc/rc.d/init.d/
108 chkconfig --add ipmedia
109 mv etc/rc.d/init.d/uemgtsrvd /etc/rc.d/init.d/
110 chkconfig --add uemgtsrvd
/home/user/curl-7.30.0
./iperf-2.0.5
/nload-0.7.4
service uemgtsrvd start
service uemgtsrvd status
tail -f uemgtsrvd_20140803_121618_1_[2216].log
tail -f /var/log/messages
cat /proc/uedevinfo
route
cd /nps/ue/log/
无底洞：/dev/null
查看CPU : WMIC ; cpu get *
win只能ping 13312byt的包了。
ftp 是基于tcp 的，没有udp
difference between passive /active
active is good for server management,however, probably blocked by firewall on client.
passive is good for client management, but not for server port managemet, also relatively to firewall on server.
IBM linux redbooks
开启ftp
#chkconfig vsftpd on //开机自启动vsftpd服务 #/etc/init.d/vsftpd start //开启vsftpd服务 #vi /etc/vsftpd/vsftpd.conf //编辑vsftp配置文件 找到下面这个并禁用： anonymous_enable=NO //禁用匿名用户登陆 再添加一行： local_enable=YES //开启本地用户登陆 建立用户： #adduser -d /var/ftp/test -g ftp -s /sbin/nologin test #passwd test iptables防火墙设置： #system-config-securitylevel 在定制里面把ftp选择上。 #/etc/init.d/iptables restart //重启一下iptables 修改iptables之后，就可以访问ftp了，但用户不能登陆，原因就是selinux需要关闭。 #vi /etc/sysconfig/selinux 找到： SELINUX=enforcing 修改为： SELINUX=disabled #reboot //重启电脑 //如果登陆之后不能写入，请把目录权限再修改一下： #chown test /var/test