【视频开发】【Live555】摄像头采集，264编码，live555直播

加入 摄像头采集和264编码，再使用live555直播

 1、摄像头采集和264编码

     将x264改成编码一帧的接口，码流不写入文件而是直接写入内存中（int  Encode_frame 函数中）。

 

复制代码
/*
 * Filename: encodeapp.h
 * Auther: mlj
 * Create date: 2013/ 1/20
 */
#ifndef _ENCODEAPP_H_
#define _ENCODEAPP_H_

#include "x264.h"
#include <stdint.h>
#define WRITEOUT_RECONSTRUCTION 1

typedef int32_t INT32;
typedef  signed char INT8;


typedef struct _EncodeApp 
{
    x264_t *h;
    x264_picture_t pic;
    x264_param_t param;

    void *outBufs;//一帧码流的缓存
    int  outBufslength;//总大小
    int   bitslen;//实际码流大小

    FILE *bits;                     // point to output bitstream file 
#ifdef WRITEOUT_RECONSTRUCTION    
    FILE *p_rec ;
#endif
}EncodeApp;
INT32 EncoderInit(EncodeApp*  EncApp,INT8 *config_filename);
INT32 EncoderEncodeFrame(EncodeApp*  EncApp);
INT32 EncoderDestroy(EncodeApp*  EncApp);

#endif
复制代码
复制代码
 /*
 * Filename: encodeapp.c
 * Auther: mlj
 * Create date: 2013/ 1/20
 */
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
#include <stdio.h>
#include "..incencodeapp.h"

#pragma comment(lib,"libx264.lib")





extern int  Encode_frame(EncodeApp*  EncApp, x264_t *h, x264_picture_t *pic );
INT32 EncoderEncodeFrame(EncodeApp*  EncApp)
{
        //printf("processing frame %d...",j);
        int i;
        //int     i_frame, i_frame_total;
        int64_t i_file=0;

    /* Encode frames */
        //EncApp->pic.i_pts = (int64_t)i_frame * (&EncApp->param)->i_fps_den;
        {
            /* Do not force any parameters */
            EncApp->pic.i_type = X264_TYPE_AUTO;
            EncApp->pic.i_qpplus1 = 0;
        }

        i_file += Encode_frame(EncApp, EncApp->h, &EncApp->pic );
    
        //fwrite(EncApp,EncApp->bits);

#ifdef WRITEOUT_RECONSTRUCTION        
        //write reconstruction
#endif
    return 0;
}

INT32 EncoderDestroy(EncodeApp*  EncApp)
{

     x264_picture_clean( &EncApp->pic );
    x264_encoder_close( EncApp->h );

    if(EncApp->outBufs )    
        free(EncApp->outBufs );     


    fclose(EncApp->bits);
#ifdef WRITEOUT_RECONSTRUCTION    
    fclose(EncApp->p_rec);
#endif
    return 0;
}
复制代码
复制代码
//x264.c中改写
int  Encode_frame(EncodeApp*  EncApp, x264_t *h, x264_picture_t *pic )
{
    x264_picture_t pic_out;
    x264_nal_t *nal;
    int i_nal, i;
    int i_file = 0;

    if( x264_encoder_encode( h, &nal, &i_nal, pic, &pic_out ) < 0 )
    {
        fprintf( stderr, "x264 [error]: x264_encoder_encode failed
" );
    }
    EncApp->bitslen  = 0;
    for( i = 0; i < i_nal; i++ )
    {
        int i_size;

        if( mux_buffer_size < nal[i].i_payload * 3/2 + 4 )
        {
            mux_buffer_size = nal[i].i_payload * 2 + 4;
            x264_free( mux_buffer );
            mux_buffer = x264_malloc( mux_buffer_size );
        }

        i_size = mux_buffer_size;
        x264_nal_encode( mux_buffer, &i_size, 1, &nal[i] );
        //i_file += p_write_nalu( EncApp->bits, mux_buffer, i_size );
        if(  EncApp->outBufslength < ( EncApp->bitslen+i_size) )
        {
            void* temp= malloc( EncApp->bitslen+i_size);
            memcpy((unsigned char*)temp, (unsigned char*)(EncApp->outBufs), EncApp->bitslen);
            free(EncApp->outBufs);
            EncApp->outBufs = temp;
        }
        memcpy( (unsigned char*)(EncApp->outBufs)+ EncApp->bitslen,mux_buffer, i_size);
        EncApp->bitslen += i_size;
    }
    //p_write_nalu( EncApp->bits, (unsigned char*)EncApp->outBufs, EncApp->bitslen );
    //if (i_nal)
    //    p_set_eop( EncApp->bits, &pic_out );

    return i_file;
}

INT32 EncoderInit(EncodeApp*  EncApp,INT8 *config_filename)
{
    int argc; 
    
    cli_opt_t opt;
    static char *para[] =
    {
        "",
        "-q",
        "28",
        "-o",
        "test.264",
        "G:\sequence\walk_vga.yuv",
        "640x480",
        "--no-asm"
    };
    char **argv = para;; 
    //para[0]    = argv[0];
    //argv    = para;
    argc    = sizeof(para)/sizeof(char*);
    x264_param_default( &EncApp->param );
    /* Parse command line */
    if( Parse( argc, argv, &EncApp->param, &opt ) < 0 )
        return -1; 
    //param->i_frame_total =  100;
 //   EncApp->param.i_width         = 640;
 //   EncApp->param.i_height        = 480;
    //EncApp->param.rc.i_qp_constant = 28;

    if( ( EncApp->h = x264_encoder_open( &EncApp->param ) ) == NULL )
    {
        fprintf( stderr, "x264 [error]: x264_encoder_open failed
" );
        return -1;
    }

    /* Create a new pic */
    x264_picture_alloc( &EncApp->pic, X264_CSP_I420, EncApp->param.i_width, EncApp->param.i_height );


    EncApp->outBufs = malloc(1024*1024);
    EncApp->outBufslength = 1024*1024;
    EncApp->bits =0 ;
#ifdef WRITEOUT_RECONSTRUCTION    
    EncApp->p_rec = NULL;
#endif
    EncApp->bits = fopen("test_vc.264","wb");

#ifdef WRITEOUT_RECONSTRUCTION    
    EncApp->p_rec = fopen("test_rec_vc.yuv", "wb");
#endif

    if(0==EncApp->bits)
    {
        printf("Can't open output files!
");
        return -1;
    }

    return 0;
}
复制代码

摄像头采集和264编码 源代码：http://download.csdn.NET/user/mlj318 

结果速度不是很快，640x480 采集加编码只能达到10fps.

 相关配置：需要OpenCV库和libx264.lib.

包含目录 G:workspacevideo4windowsCameraDS and 264inc;H:TDDOWNLOADOPEN_CVopencvuildincludeopencv2;H:TDDOWNLOADOPEN_CVopencvuildincludeopencv;H:TDDOWNLOADOPEN_CVopencvuildinclude;

库目录 G:workspacevideo4windowsCameraDS and codelib;H:TDDOWNLOADOPEN_CVopencvuildx86vc10lib;

链接器 附加库目录 G:workspacevideo4windowsCameraDS and 264lib;

 

链接器 附加依赖项

opencv_calib3d243d.lib
opencv_contrib243d.lib
opencv_core243d.lib
opencv_features2d243d.lib
opencv_flann243d.lib
opencv_gpu243d.lib
opencv_haartraining_engined.lib
opencv_highgui243d.lib
opencv_imgproc243d.lib
opencv_legacy243d.lib
opencv_ml243d.lib
opencv_nonfree243d.lib
opencv_objdetect243d.lib
opencv_photo243d.lib
opencv_stitching243d.lib
opencv_ts243d.lib
opencv_video243d.lib
opencv_videostab243d.lib
libx264.lib

2、再加入live555直播

复制代码
class Cameras
{
public:
    void Init();
    void GetNextFrame();
    void Destory();
public:
    CCameraDS camera1; 
    CCameraDS camera2; 
    EncodeApp  encodeapp;
    IplImage *pFrame1 ;
    IplImage *pFrame2 ;
    unsigned char *RGB1;
    unsigned char *RGB2;
    unsigned char *YUV1;
    unsigned char *YUV2;
    unsigned char *YUV_merge;
};


void Cameras::Init()
{
    // 1、考虑到已经存在了显示图像的窗口，那就不必再次驱动摄像头了，即便往下驱动那也是摄像头已被占用。
    if(IsWindowVisible(FindWindow(NULL, g_szTitle)))
    {
        exit (-1);
    }

    //仅仅获取摄像头数目
    int m_iCamCount = CCameraDS::CameraCount();
    printf("There are %d cameras.
", m_iCamCount);

    if(m_iCamCount==0)
    {
    fprintf(stderr, "No cameras.
");
    exit( -1); 
    }

    //打开第一个摄像头
    if(! camera1.OpenCamera(0, false, WIDTH,HEIGHT)) //不弹出属性选择窗口，用代码制定图像宽和高
    {
    fprintf(stderr, "Can not open camera1.
");
    exit( -1); 
    }
    if(! camera2.OpenCamera(1, false,  WIDTH,HEIGHT)) //不弹出属性选择窗口，用代码制定图像宽和高
    {
    fprintf(stderr, "Can not open camera2.
");
    exit( -1); 
    } 
    cvNamedWindow("camera1");
    cvNamedWindow("camera2");


    EncoderInit(&encodeapp,NULL); 

     pFrame1 = camera1.QueryFrame();
    pFrame2 = camera2.QueryFrame();

    RGB1=(unsigned char *)malloc(pFrame1->height*pFrame1->width*3);
    YUV1=(unsigned char *)malloc(pFrame1->height*pFrame1->width*1.5);
    RGB2=(unsigned char *)malloc(pFrame2->height*pFrame2->width*3);
    YUV2=(unsigned char *)malloc(pFrame2->height*pFrame2->width*1.5);
    YUV_merge=(unsigned char *)malloc(pFrame2->height*pFrame2->width*1.5);
}
void Cameras::GetNextFrame()
{
    {
    pFrame1 = camera1.QueryFrame();
    pFrame2 = camera2.QueryFrame();
    cvShowImage("camera1", pFrame1);
    cvShowImage("camera2", pFrame2);
    for(int i=0;i<pFrame1->height;i++)
    {
        for(int j=0;j<pFrame1->width;j++)
        {
        RGB1[(i*pFrame1->width+j)*3] = pFrame1->imageData[i * pFrame1->widthStep + j * 3 + 2];;
        RGB1[(i*pFrame1->width+j)*3+1]= pFrame1->imageData[i * pFrame1->widthStep + j * 3 + 1];
        RGB1[(i*pFrame1->width+j)*3+2] = pFrame1->imageData[i * pFrame1->widthStep + j * 3  ]; 

        RGB2[(i*pFrame1->width+j)*3] = pFrame2->imageData[i * pFrame1->widthStep + j * 3 + 2];;
        RGB2[(i*pFrame1->width+j)*3+1]= pFrame2->imageData[i * pFrame1->widthStep + j * 3 + 1];
        RGB2[(i*pFrame1->width+j)*3+2] = pFrame2->imageData[i * pFrame1->widthStep + j * 3  ]; 
        }
    }



    Convert(RGB1, YUV1,pFrame1->width,pFrame1->height);
    Convert(RGB2, YUV2,pFrame2->width,pFrame2->height);
    mergeleftrigth(YUV_merge,YUV1,YUV2,pFrame2->width,pFrame2->height);

    unsigned char *p1,*p2;
    p1=YUV_merge;
    p2=encodeapp.pic.img.plane[0];//
    for(int i=0;i<pFrame1->height;i++)
    {
        memcpy(p2,p1,pFrame1->width);
        p1+=pFrame1->width;
        p2+=WIDTH;
    }
    p2=encodeapp.pic.img.plane[1];
    for(int i=0;i<pFrame1->height/2;i++)
    {
        memcpy(p2,p1,pFrame1->width/2);
        p1+=pFrame1->width/2;
        p2+=WIDTH/2;
    }
    p2=encodeapp.pic.img.plane[2];
    for(int i=0;i<pFrame1->height/2;i++)
    {
        memcpy(p2,p1,pFrame1->width/2);
        p1+=pFrame1->width/2;
        p2+=WIDTH/2;
    }
    EncoderEncodeFrame(&encodeapp);
    }
}
void Cameras::Destory()
{

    free(RGB1);
    free(RGB2);
    free(YUV1);
    free(YUV2);
    free(YUV_merge);
    camera1.CloseCamera();
    camera2.CloseCamera();
    cvDestroyWindow("camera1");
    cvDestroyWindow("camera2");
    EncoderDestroy(&encodeapp);
}
复制代码
复制代码
void H264FramedLiveSource::doGetNextFrame()
{

    //if( filesize(fp) >  fMaxSize)
    //  fFrameSize = fread(fTo,1,fMaxSize,fp); 
    //else
    //{
    //    fFrameSize = fread(fTo,1,filesize(fp),fp);
    //    fseek(fp, 0, SEEK_SET);
    //}
    //fFrameSize = fMaxSize;

    TwoWayCamera.GetNextFrame();
    fFrameSize =  TwoWayCamera.encodeapp.bitslen;
    if( fFrameSize >  fMaxSize)
    {
            fNumTruncatedBytes = fFrameSize - fMaxSize;  
            fFrameSize = fMaxSize;  
     }  
    else
    {  
        fNumTruncatedBytes = 0;  
    }  

    memmove(fTo, TwoWayCamera.encodeapp.outBufs, fFrameSize);  

    nextTask() = envir().taskScheduler().scheduleDelayedTask( 0,
        (TaskFunc*)FramedSource::afterGetting, this);//表示延迟0秒后再执行 afterGetting 函数
    return;
}
复制代码

源代码：http://download.csdn.net/user/mlj318 

 640x480  只能达到3.5fps.

 相关配置：需要opencv库和libx264.lib.

包含目录 H:TDDOWNLOADOPEN_CVopencvuildincludeopencv2;H:TDDOWNLOADOPEN_CVopencvuildincludeopencv;H:TDDOWNLOADOPEN_CVopencvuildinclude;G:workspaceavslive555test -sendlive555testinc;G:workspaceavslive555testlive555testBasicUsageEnvironmentinclude;G:workspaceavslive555testlive555testUsageEnvironmentinclude;G:workspaceavslive555testlive555testliveMediainclude;G:workspaceavslive555testlive555testgroupsockinclude;

库目录 G:workspaceavslive555testlive555testlib;H:TDDOWNLOADOPEN_CVopencvuildx86vc10lib;

链接器 附加库目录 G:workspacevideo4windowsCameraDS and 264lib;

链接器 附加依赖项

opencv_calib3d243d.lib
opencv_contrib243d.lib
opencv_core243d.lib
opencv_features2d243d.lib
opencv_flann243d.lib
opencv_gpu243d.lib
opencv_haartraining_engined.lib
opencv_highgui243d.lib
opencv_imgproc243d.lib
opencv_legacy243d.lib
opencv_ml243d.lib
opencv_nonfree243d.lib
opencv_objdetect243d.lib
opencv_photo243d.lib
opencv_stitching243d.lib
opencv_ts243d.lib
opencv_video243d.lib
opencv_videostab243d.lib
libx264.lib

 

出现的错误：

1>LIBCMTD.lib(sprintf.obj) : error LNK2005: _sprintf 已经在 MSVCRTD.lib(MSVCR100D.dll) 中定义
1>LIBCMTD.lib(crt0dat.obj) : error LNK2005: _exit 已经在 MSVCRTD.lib(MSVCR100D.dll) 中定义
1>LIBCMTD.lib(crt0dat.obj) : error LNK2005: __exit 已经在 MSVCRTD.lib(MSVCR100D.dll) 中定义

LIBCMTD.lib与 MSVCRTD.lib 冲突，在链接器- 输入 -忽略特定默认库中加上 LIBCMTD.lib 即可。

 




FROM: http://www.cnblogs.com/mlj318/archive/2013/01/25/2873143.html

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/huty/p/8517073.html