Linux系统初始化配置项(centos7)

主机刚安装完系统，会做一些配置上的优化。

修改时区

　　通过命令将时区设置为亚洲/上海。

timedatectl set-timezone Asia/Shanghai
#centos7

cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
#centos6

关闭seLinux

　　修改配置文件

sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
setenforce 0

关闭防火墙

　　生产环境中网络层面会做出一些限制，所以主机基本上不会设置防火墙策略。

systemctl stop firewalld
systemctl disable firewalld

禁止IPV6登陆与修改网卡名称eth0

　　修改网卡文件名，

mv /etc/sysconfig/network-scripts/ifcfg-ens33 /etc/sysconfig/network-scripts/ifcfg-eth0

　　修改系统grub参数，

vim /etc/default/grub
#修改以下参数
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet net.ifnames=0 biosdevname=0 ipv6.disable=1"

　　crashkernel=auto：为kdump预留的内存，

　　net.ifnames=0 biosdevname=0：修改网卡为eth0

　　ipv6.disable=1：禁止IPV6

grub2-mkconfig -o /boot/grub2/grub.cfg
#重新生成GRUB配置并更新内核，重启后才能生效

　　重启后ip a查看，网卡名已变为eht0

用户登陆密码设置

vim /etc/login.defs
#修改以下参数
　　PASS_MAX_DAYS 90
　　PASS_MIN_DAYS   0
　　PASS_MIN_LEN 15
　　PASS_WARN_AGE 15

添加密码强度策略

vim /etc/pam.d/system-auth
#添加以下策略
    password requisite pam_pwquality.so try_first_pass local_users_only retry=3  minlen=15 lcredit=-2 ucredit=-2 dcredit=-2 ocredit=-2

　　retry=3设置新密码时，有三次机会输入；minlen最小长度，lcredit小写字母，ucredit大写字母，dcredit数字，ocredit特殊字符，-2不少于两位。

限制普通用户su权限

vim /etc/pam.d/su
#添加以下策略
　　auth    required    pam_wheel.so use_uid

　　只允许wheel组的用户可以使用su命令，可以把允许使用su的用户的附加组指定为wheel。

密码错误锁定

vim /etc/pam.d/sshd
#添加以下策略
　　auth required pam_tally2.so deny=5 unlock_time=600 even_deny_root root_unlock_time=300

　　普通用户登陆密码错误5次，则用户锁定600秒；root用户则锁定300秒。

设置会话超时时间

vim /etc/profile
#添加以下策略
　　export TMOUT=1800

优化ssh服务

vim /etc/ssh/sshd_config
#修改以下参数
　　Port 22
　　Port 1022    #添加备用端口
　　PermitRootLogin no    #禁止Root直接登陆
　　MaxAuthTries 6    #可以限制密码暴力破解攻击
　　GSSAPIAuthentication no
　　UseDNS no    #禁止DNS解析主机名

#修改完重启服务
systemctl restart sshd

禁止热键关机

　　删除配置文件/usr/lib/systemd/system/ctrl-alt-del.target即可

rm -f /usr/lib/systemd/system/ctrl-alt-del.target

禁止yum 升级内核参数

　　内核升级有时候会出现不可意料的错误，一般情况不建议升级内核；

vim /etc/yum.conf
#添加以下策略
　　exclude=kernel*

优化ulimit

　　limits.conf文件是pam_limits.so的配置文件，对系统访问资源做出保护性限制，限制用户最大文件和进程数；

　　编辑配置文件

vim /etc/security/limits.conf　　
#添加一下内容
　　* soft nofile 655350
　　* hard nofile 655350
　　* soft nproc 655360
　　* hard nproc 655360
　　zf soft nofile 655350
　　zf hard nofile 655350
　　zf soft nproc 655360
　　zf hard nproc 655360

优化内核参数

　　sysctl -p 重新加载系统参数

vim /etc/sysctl.conf
#添加以下内容
　　net.ipv4.tcp_max_tw_buckets = 6000
　　#允许TIME-WAIT套接字数量的最大值。超过些数字，TIME-WAIT套接字将立刻被清除同时打印警告信息。默认是180000，过多的TIME-WAIT套接字会使webserver变慢

　　net.core.netdev_max_backlog = 65535
　　#每个网络接口接收数据包的速率比内核处理这些包的速率快时，允许发送到队列的数据包的最大数目

　　net.core.somaxconn = 65535
　　#该参数用于调节系统同时发起的TCP连接数，该默认值较小，肯那个导致连接超时或重传问题

　　net.ipv4.tcp_timestamps = 0
　　#该参数用于设置时间戳，可以避免序列号的卷绕。一个1Gbps的链路肯定会遇到以前用过的序列号。时间戳能够让内核接受这种“异常”的数据包

　　net.ipv4.tcp_synack_retries = 1
　　#该参数用于设置内核放弃TCP连接之前向客户端发送SYN+ACK包的数量。

　　net.ipv4.tcp_syn_retries = 1
　　#该参数的作用与上一个参数类似，设置内核放弃建立连接之前发送SYN包的数量

　　net.ipv4.tcp_tw_reuse = 1
　　#1代表允许将状态为TIME-WAIT状态的socket连接重新用于新的连接。

　　net.ipv4.tcp_fin_timeout = 15
　　#当服务器主动关闭链接时，socket保持FN-WAIT-2状态的最大时间

　　net.ipv4.tcp_keepalive_time = 30
　　#当keepalive启用时，TCP发送keepalive消息的频率。默认是2个小时。将其调小一些，可以更快的清除无用的连接

　　net.ipv4.ip_local_port_range = 10240    65000
　　#UDP和TCP连接中本地端口（不包括连接的远端）的取值范围

　　net.ipv4.tcp_tw_recycle = 1
　　#允许将TIME-WAIT sockets重新用于新的TCP连接

　　net.ipv4.tcp_max_tw_buckets = 20000
　　#容纳TIME_WAIT状态的连接数，如果超过，则立即销毁TIME_WAIT套接字

 初始化脚本

　　此脚本只能用于centos7，测试机器为centos7.4最小化安装，脚本没有问题，但如使用需要对time_zone、ssh_conf等模块根据实际修改。

#!/bin/bash
#
### system release ###
system_check(){
    RELEASE=`cat /etc/redhat-release |awk '{print $(NF-1)}' | awk -F. '{print $1}'`
    USER=`whoami`
    if [ $RELEASE -eq 7 ];then
        echo -e "33[34m system check completed 33[0m"
    else
        echo -e "33[31m this script only support centos7 system 33[0m"
        exit 1
    fi
    if [ $USER != 'root' ];then
        echo -e "33[31m the current user is not "root" 33[0m"
        exit 1
    fi
}
### install package ###
yum_install(){
    PACKAGE="ntpdate wget bc vim gcc gcc-c++ openssl openssl-devel lrzsz pcre-devel sysstat iftop lsof tcpdump telnet nmap traceroute net-tools"
    yum install -y $PACKAGE 1>/dev/null 2>&1
    echo -e "33[34m package install completed 33[0m"
}
### time zone ###
time_zone(){
    NTP_PATH=`which ntpdate`
    if [ `date +%z` != '+0800' ];then
        timedatectl set-timezone Asia/Shanghai
        if [ `date +%z` == '+0800' ];then
            echo -e "33[34m timezone set completed 33[0m"
        else
            echo -e "33[31m timezone set failed 33[0m"
        fi
    fi
    grep ntpserver /etc/hosts || echo "X.X.X.X ntpserver">>/etc/hosts
    grep ntpserver /var/spool/cron/root || echo "10 * * * * ${NTP_PATH} ntpserver" >>/var/spool/cron/root
    $NTP_PATH ntpserver &> /dev/null && echo -e "33[34m time sync completed 33[0m" || echo -e "33[31m time sync failed 33[0m"
}

### disable selinux ###
disable_selinux(){
    FILE="/etc/selinux/config"
    BACKUP="/etc/selinux/config.$DATE"
    if [ ! -f $BACKUP ];then
        cp $FILE $BACKUP
    fi
    setenforce 0
    sed -i 's/SELINUX=enforcing/SELINUX=disabled/' $FILE
    grep 'SELINUX=disabled' $FILE && echo -e "33[34m disable selinux completed 33[0m" || echo -e "33[31m disable selinux failed 33[0m"
}
### disable firewalld ###
disable_firewalld(){
    systemctl stop firewalld
    systemctl disable firewalld &>/dev/null
    if [ `systemctl is-enabled firewalld` == 'disabled' ];then
        echo -e "33[34m disable firewalld completed 33[0m"
    else
        echo -e "33[31m disable firewalld failed 33[0m"
    fi
}
### ban ipv6 and modify eth0 ###
#modify_grub(){
#    FILE="/etc/default/grub"
#    BACKUP="/tmp/grub.$DATE"
#    DEFUALT_PARAMS=`grep "GRUB_CMDLINE_LINUX" $FILE | awk -F" '{print $2}'`
#    REPLACE_PARAMS="GRUB_CMDLINE_LINUX="$DEFUALT_PARAMS crashkernel=auto net.ifnames=0 biosdevname=0 ipv6.disable=1""
#    cp $FILE $BACKUP
#    sed -i 's/GRUB_CMDLINE_LINUX.*/'$REPLACE_PARAMS'/g' $FILE
#    grep 'net.ifnames=0 biosdevname=0 ipv6.disable=1' $FILE && echo -e "33[34m modify grub completed 33[0m" || echo -e "33[31m modify grub failed 33[0m"
#    grub2-mkconfig -o /boot/grub2/grub.cfg &>dev/null
#    mv /etc/sysconfig/network-scripts/ifcfg-ens* /etc/sysconfig/network-scripts/ifcfg-eth0
#}
### password expiry ###
passwd_expiry(){
    FILE="/etc/login.defs"
    BACKUP="/etc/login.defs.$DATE"
    cp $FILE $BACKUP
    sed -i 's/PASS_MAX_DAYS.*/PASS_MAX_DAYS 90/g' $FILE
    sed -i 's/PASS_MIN_DAYS.*/PASS_MIN_DAYS 0/g' $FILE
    sed -i 's/PASS_MIN_LEN.*/PASS_MIN_LEN 15/g' $FILE
    sed -i 's/PASS_WARN_AGE.*/PASS_WARN_AGE 15/g' $FILE
    echo -e "33[34m passwd expiry modify completed 33[0m"
}
### password complex ###
paawd_complex(){
    FILE="/etc/pam.d/system-auth"
    BACKUP="/etc/pam.d/system-auth.$DATE"
    cp $FILE $BACKUP
    sed -i 's/.*pam_pwquality.so.*try_first_pass.*/password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 minlen=15 lcredit=-2 ucredit=-2 dcredit=-2 ocredit=-2/g' $FILE
    echo -e "33[34m passwd complex set completed 33[0m"
}
### password lock ###
passwd_lock(){
    FILE="/etc/pam.d/sshd"
    BACKUP="/etc/pam.d/sshd.$DATE"
    cp $FILE $BACKUP
    sed    -i '1aauth required pam_tally2.so deny=5 unlock_time=600 even_deny_root root_unlock_time=300' $FILE
    grep 'pam_tally2.so' $FILE && echo -e "33[34m passwd lock set completed 33[0m" || echo -e "33[31m passwd lock set failed 33[0m"
}
### ban user su ###
user_su(){
    FILE="/etc/pam.d/su"
    BACKUP="/etc/pam.d/su.$DATE"
    cp $FILE $BACKUP
    sed -i 's#/sbin:/bin:/usr/sbin:/usr/bin#/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin#' /etc/sudoers
    sed -i 's/^%wheel	ALL=(ALL).*/%wheel	ALL=(ALL)	NOPASSWD: ALL/g' /etc/sudoers
    sed -i '/pam_wheel.so use_uid/aauth		required	pam_wheel.so use_uid' $FILE
    grep '^auth.*use_uid' $FILE && echo -e "33[34m ban su set completed 33[0m" || echo -e "33[31m ban su set failed 33[0m"
}
### timeout time ###
timeout(){
    FILE="/etc/profile"
    echo "export TMOUT=1800" >> $FILE
    source $FILE
    grep "TMOUT=1800" $FILE && echo -e "33[34m timeout set completed 33[0m" || echo -e "33[31m timeout set failed 33[0m"
}
### set ssh ###
ssh_conf(){
    FILE="/etc/ssh/sshd_config"
    BACKUP="/etc/ssh/sshd_config.$DATE"
    cp $FILE $BACKUP
    sed -i '/^#Port 22/aPort 22
Port 1022' $FILE
    sed -i '/^#PermitRootLogin.*/aPermitRootLogin no' $FILE
    sed -i 's/^GSSAPIAuthentication.*/GSSAPIAuthentication no/g' $FILE
    sed -i '/^#UseDNS/aUseDNS no' $FILE
    systemctl reload sshd
    echo -e "33[34m ssh set completed 33[0m"
}
### hotkey reboot ###
hotkey_reboot(){
    FILE="/usr/lib/systemd/system/ctrl-alt-del.target"
    BACKUP="/usr/lib/systemd/system/ctrl-alt-del.target.default"
    mv $FILE $BACKUP
    ls /usr/lib/systemd/system/ctrl-alt-del.target &>/dev/null && echo -e "33[31m hotkey set failed 33[0m" || echo -e "33[34m hotkey set completed 33[0m"
}
### ban kernel update ###
kernel_update(){
    FILE="/etc/yum.conf"
    BACKUP="/etc/yum.conf.$DATE"
    cp $FILE $BACKUP
    sed -i '/[main]/aexclude=kernel*' $FILE
    grep 'exclude=kernel' $FILE && echo -e "33[34m ban kernel update completed 33[0m" || echo -e "33[31m ban kernel update failed 33[0m"
}
### set ulimit ###
set_ulimit(){
    FILE="/etc/security/limits.conf"
    BACKUP="/etc/security/limits.conf.default"
    mv $FILE $BACKUP  
    cat >> $FILE << EOF
* soft nofile 655350
* hard nofile 655350
* soft nproc 655360
* hard nproc 655360
zf soft nofile 655350
zf hard nofile 655350
zf soft nproc 655360
zf hard nproc 655360
EOF
    egrep -v "^#|^$" $FILE
    echo -e "33[34m unlimit set completed 33[0m"
}
### kernel params ###
kernel_params(){
    FILE="/etc/sysctl.conf"
    BACKUP="/etc/sysctl.conf.default"
    cp $FILE $BACKUP
    cat >> $FILE <<EOF
net.ipv4.tcp_max_tw_buckets = 6000
net.core.netdev_max_backlog = 65535
net.core.somaxconn = 65535
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 1
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 15
net.ipv4.tcp_keepalive_time = 30
net.ipv4.ip_local_port_range = 10240    65000
###增加回收机制
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_tw_buckets = 20000
EOF
    egrep -v "^#|^$" $FILE 
    echo -e "33[34m kernel params set completed 33[0m"
}
### host user ###
user_create(){
    useradd -G wheel sadmin
    echo "123456" | passwd sadmin --stdin
    useradd zf
    echo "123456" | passwd zf --stdin
    chage -M 99999 sadmin
}
main(){
    system_check
    yum_install
    time_zone
    disable_selinux
    disable_firewalld
    passwd_expiry
    paawd_complex
    passwd_lock
    user_su
    timeout
    ssh_conf
    hotkey_reboot
    kernel_update
    set_ulimit
    kernel_params
    user_create
}
### excute mian ###
DATE=`date +%F`
main