环境示例
Centos7 192.168.1.101 master
Centos7 192.168.1.102 slave
已安装openssl
1、检查机器名和连通性[root用户下操作]
master 查看文件“/etc/hostname" 是否配置成”master",文件内容为空，需要添加“master"，添加后如：
master
ping slave,无法ping通，查看文件”/etc/hosts" ，是否添加对slave的解析,如：
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.101 master 192.168.1.102 slave
相应slave也同样检查网络名称“slave”和master地址解析
确保在master机器上ping slave成功，在slave机器上ping master成功
2、修改ssh config配置[root用户下操作]
查看/etc/ssh/sshd_config文件[vi /etc/ssh/sshd_config],开启ssh证书登录，即找到注释配置[#RSAAuthentication yes,#PubkeyAuthentication yes],把前面的“#"号去掉，如：
RSAAuthentication yes PubkeyAuthentication yes # The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 # but this is overridden so installations will only check .ssh/authorized_keys AuthorizedKeysFile .ssh/authorized_keys
另外在该文件中显示，AuthorizedKeysFile .ssh/authorized_keys，keys存储路径在”.ssh“的文件夹的authorized_keys文件里。
3、在机器master、slave上建立相同的用户，以下以test用户为例
[root@slave ~]# useradd test -p test [root@slave ~]# echo test | passwd --stdin test Changing password for user test. passwd: all authentication tokens updated successfully.
4、生成ssh证书文件
使用test登录master,创建文件夹”.ssh"[mkdir .ssh],cd到.ssh文件夹，输入命令“ssh-keygen -t rsa"，回车到底，如：
[test@master .ssh]$ ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/home/hadoop/.ssh/id_rsa):[回车] Enter passphrase (empty for no passphrase):[回车] Enter same passphrase again:[回车] Your identification has been saved in /home/test/.ssh/id_rsa. Your public key has been saved in /home/test/.ssh/id_rsa.pub. The key fingerprint is: e4:37:20:54:19:26:d0:39:34:b3:79:cb:00:6b:c9:e5 test@master The key's randomart image is: +--[ RSA 2048]----+ | o+Bo+o | | . B+B. | | = E.+ | | . B o | | S o | | . . | | | | | | | +-----------------+ [test@master .ssh]$
查看”.ssh“文件夹下文件，产生master的文件私钥id_rsa和公钥id_rsa.pub：
[test@master .ssh]$ ls
id_rsa id_rsa.pub
使用test登录slave,相同操作，产生产生slave的文件私钥id_rsa和公钥id_rsa.pub
5、合并id_rsa.pub，追加到authorized_key文件中
test登录master, 在“.ssh”文件夹下，输入命令“scp id_rsa.pub test@slave:~/.ssh/authorized_keys”,拷贝master的公钥id_rsa.pub到slave的.ssh/authorized_keys。
[test@master .ssh]$ scp id_rsa.pub test@slave:~/.ssh/authorized_keys The authenticity of host 'slave (192.168.1.102)' can't be established. ECDSA key fingerprint is b5:9e:ca:16:64:66:08:3b:9b:f4:be:5b:9f:f2:fc:a7. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'slave,192.168.1.102' (ECDSA) to the list of known hosts. test@slave's password: id_rsa.pub 100% 395 0.4KB/s 00:00 [test@master .ssh]$
test登录slave,在“.ssh”文件夹下，输入命令“cat id_rsa.pub >> authorized.keys”,把slave的公钥id_rsa.pub追加到slave的authorized_keys文件。检查文件“authorized_keys”，内容如下：
ssh-rsa ******OfQi3v6lxMGIv/VWgcK5EaYRilz4/XPAmbjxGpFV8nD/JbTrK36v1zsx6TmyckIEfoHU9FvuQoJapxhH/bBSsXix2EWv8UsOCyp test@master ssh-rsa ******knrMMPON0FrTnjhv3hS5ZAPCEad36ah5lyeOtix2Sr2ug0YP6Ai0iT6Jd04hcUAKF21PBMybvlBYxzAfEr5vBxNBp2Ijwlvp1zP test@slave1
注：因文件太长省略，用“******”代替
在slave的“.ssh”文件夹下，复制authorized_keys到master的test，命令“scp authorized_keys test@master:~/.ssh/"，此时，master “.ssh”文件夹下，已经存在与slave相同的authorized_keys文件
6、测试登录
在master，test用户登录的情况下，输入“ssh slave”
在slave，test用户登录的情况下，输入“ssh master”
如在每次ssh登入时需要输入密码，跟没有配置免密登陆时一样情况，需要需改.ssh文件夹访问权限,分配权限为登陆用户
假设无法登陆master，则需要在master上做以下操作
[root@master ~]# chown test: /home/test/.ssh [root@master ~]# chown test: /home/test/.ssh/* [root@master ~]# chmod 700 /home/test/.ssh [root@master ~]# chmod 600 /home/test/.ssh/*