在实现了HTTPserver之后。本人打算再实现一个FTPserver。
因为FTP协议与HTTP一样都位于应用层，所以实现原理也类似。
在这里把实现的原理和源代码分享给大家。
首先须要明白的是FTP协议中涉及命令port和数据port，即每一个client通过命令port向server发送命令（切换文件夹、删除文件等），通过数据port从server接收数据（文件夹列表、下载上传文件等）。这就要求对每一个连接都必须同一时候维护两个port，假设使用类似于上一篇文章中的多路IO就会复杂非常多，因此本文採用了类似Apache的多进程机制，即对每一个连接创建一个单独的进程进行管理。
接下来简要说明一下FTP协议的通信流程。Ftpserver向client发送的消息主要由两部分组成。第一部分是状态码（与HTTP类似），第二部分是详细内容（能够为空）。两部分之间以空格分隔，如“220 TS FTP Server ready”就告诉了client已经连接上了server；client向server发送的命令也由两部分组成。第一部分是命令字符串。第二部分是详细内容（能够为空），两部分之间也以空格分隔。如“USER anonymous”就指定了登录FTPserver的username。以一个登录FTPserver并获取文件夹列表的流程为例：
220 TS FTP Server ready... USER anonymous 331 Password required for anonymous PASS chrome@example.com 530 Not logged in,password error. QUIT 221 Goodbye USER zhaoxy 331 Password required for zhaoxy PASS 123 230 User zhaoxy logged in SYST 215 UNIX Type: L8 PWD 257 "/" is current directory. TYPE I 200 Type set to I PASV 227 Entering Passive Mode (127,0,0,1,212,54) SIZE / 550 File not found PASV 227 Entering Passive Mode (127,0,0,1,212,56) CWD / 250 CWD command successful. "/" is current directory. LIST -l 150 Opening data channel for directory list. 16877 8 501 20 272 4 8 114 . 16877 29 501 20 986 4 8 114 .. 33188 1 501 20 6148 3 28 114 .DS_Store 16877 4 501 20 136 2 27 114 css 33279 1 501 20 129639543 6 14 113 haha.pdf 16877 11 501 20 374 2 27 114 images 33261 1 501 20 11930 3 9 114 index.html 16877 6 501 20 204 2 28 114 js 226 Transfer ok. QUIT 221 Goodbye在一个client连接到server后，首先server要向client发送欢迎信息220，client依此向server发送username和password，server校验之后假设失败则返回530，成功则返回230。一般全部的client第一次连接server都会尝试用匿名用户进行登录。登录失败再向用户询问username和password。接下来，client会与server确认文件系统的类型，查询当前文件夹以及设定传输的数据格式。
FTP协议中主要有两种格式，二进制和ASCII码，两种格式的主要差别在于换行。二进制格式不会对数据进行不论什么处理，而ASCII码格式会将回车换行转换为本机的回车字符。比方Unix下是 ,Windows下是 ，Mac下是 。一般图片和运行文件必须用二进制格式。CGI脚本和普通HTML文件必须用ASCII码格式。
在确定了传输格式之后，client会设定传输模式，Passive被动模式或Active主动模式。在被动模式下，server会再创建一个套接字绑定到一个空暇port上并開始监听，同一时候将本机ip和port号（h1,h2,h3,h4,p1,p2，当中p1*256+p2等于port号）发送到client。
当之后须要数据传输的时候。server会通过150状态码通知client。client收到之后会连接到之前指定的port并等待数据。
传输完毕之后，server会发送226状态码告诉client传输成功。
假设client不须要保持长连接的话，此时能够向server发送QUIT命令断开连接。在主动模式下。流程与被动模式类似。仅仅是套接字由client创建并监听，server连接到client的port上进行数据传输。
下面是main函数中的代码：
#include <iostream>
#include "define.h"
#include "CFtpHandler.h"
#include <sys/types.h>
#include <sys/socket.h>
int main(int argc, const char * argv[])
{
int port = 2100;
int listenFd = startup(port);
//ignore SIGCHLD signal, which created by child process when exit, to avoid zombie process
signal(SIGCHLD,SIG_IGN);
while (1) {
int newFd = accept(listenFd, (struct sockaddr *)NULL, NULL);
if (newFd == -1) {
//when child process exit, it'll generate a signal which will cause the parent process accept failed.
//If happens, continue.
if (errno == EINTR) continue;
printf("accept error: %s(errno: %d)
",strerror(errno),errno);
}
//timeout of recv
struct timeval timeout = {3,0};
setsockopt(newFd, SOL_SOCKET, SO_RCVTIMEO, (char *)&timeout,sizeof(struct timeval));
int pid = fork();
//fork error
if (pid < 0) {
printf("fork error: %s(errno: %d)
",strerror(errno),errno);
}
//child process
else if (pid == 0) {
//close useless socket
close(listenFd);
send(newFd, TS_FTP_STATUS_READY, strlen(TS_FTP_STATUS_READY), 0);
CFtpHandler handler(newFd);
int freeTime = 0;
while (1) {
char buff[256];
int len = (int)recv(newFd, buff, sizeof(buff), 0);
//connection interruption
if (len == 0) break;
//recv timeout return -1
if (len < 0) {
freeTime += 3;
//max waiting time exceed
if (freeTime >= 30) {
break;
}else {
continue;
}
}
buff[len] = ' ';
//reset free time
freeTime = 0;
if (handler.handleRequest(buff)) {
break;
}
}
close(newFd);
std::cout<<"exit"<<std::endl;
exit(0);
}
//parent process
else {
//close useless socket
close(newFd);
}
}
close(listenFd);
return 0;
}
代码中先创建了套接字并绑定到指定port上，然后进入循环開始监听port。
每监听到一个新的连接就fork出一个子进程。子进程向client发送欢迎信息后进入循环处理client发送过来的命令，直到收到QUIT命令或者连接超时退出循环。以上代码中须要注意三个地方。一是子进程在退出之后会向父进程发送SIGCHLD信号。假设父进程不进行处理（调用wait或忽略）就会导致子进程变为僵尸进程，本文中採用的是忽略的方式；二是accept函数在父进程收到信号时会直接返回。因此须要推断假设返回是因为信号则继续循环，不fork，否则会无限创建子进程；三是在fork之后须要将不使用的套接字关闭，比方父进程须要关闭新的连接套接字，而子进程须要关闭监听套接字。避免套接字无法全然关闭。
最后通过CFtpHandler类中的handleRequest方法处理client的命令，部分代码例如以下：
//handle client request
bool CFtpHandler::handleRequest(char *buff) {
stringstream recvStream;
recvStream<<buff;
cout<<buff;
string command;
recvStream>>command;
bool isClose = false;
string msg;
//username
if (command == COMMAND_USER) {
recvStream>>username;
msg = TS_FTP_STATUS_PWD_REQ(username);
}
//password
else if (command == COMMAND_PASS) {
recvStream>>password;
if (username == "zhaoxy" && password == "123") {
msg = TS_FTP_STATUS_LOG_IN(username);
}else {
msg = TS_FTP_STATUS_PWD_ERROR;
}
}
//quit
else if (command == COMMAND_QUIT) {
msg = TS_FTP_STATUS_BYE;
isClose = true;
}
//system type
else if (command == COMMAND_SYST) {
msg = TS_FTP_STATUS_SYSTEM_TYPE;
}
//current directory
else if (command == COMMAND_PWD) {
msg = TS_FTP_STATUS_CUR_DIR(currentPath);
}
//transmit type
else if (command == COMMAND_TYPE) {
recvStream>>type;
msg = TS_FTP_STATUS_TRAN_TYPE(type);
}
//passive mode
else if (command == COMMAND_PASSIVE) {
int port = 0;
if (m_dataFd) {
close(m_dataFd);
}
m_dataFd = startup(port);
stringstream stream;
stream<<TS_FTP_STATUS_PASV<<port/256<<","<<port%256<<")";
msg = stream.str();
//active passive mode
m_isPassive = true;
}
//active mode
else if (command == COMMAND_PORT) {
string ipStr;
recvStream>>ipStr;
char ipC[32];
strcpy(ipC, ipStr.c_str());
char *ext = strtok(ipC, ",");
m_clientPort = 0; m_clientIp = 0;
m_clientIp = atoi(ext);
int count = 0;
//convert string to ip address and port number
//be careful, the ip should be network endianness
while (1) {
if ((ext = strtok(NULL, ","))==NULL) {
break;
}
switch (++count) {
case 1:
case 2:
case 3:
m_clientIp |= atoi(ext)<<(count*8);
break;
case 4:
m_clientPort += atoi(ext)*256;
break;
case 5:
m_clientPort += atoi(ext);
break;
default:
break;
}
}
msg = TS_FTP_STATUS_PORT_SUCCESS;
}
//file size
else if (command == COMMAND_SIZE) {
recvStream>>fileName;
string filePath = ROOT_PATH+currentPath+fileName;
long fileSize = filesize(filePath.c_str());
if (fileSize) {
stringstream stream;
stream<<TS_FTP_STATUS_FILE_SIZE<<fileSize;
msg = stream.str();
}else {
msg = TS_FTP_STATUS_FILE_NOT_FOUND;
}
}
//change directory
else if (command == COMMAND_CWD) {
string tmpPath;
recvStream>>tmpPath;
string dirPath = ROOT_PATH+tmpPath;
if (isDirectory(dirPath.c_str())) {
currentPath = tmpPath;
msg = TS_FTP_STATUS_CWD_SUCCESS(currentPath);
}else {
msg = TS_FTP_STATUS_CWD_FAILED(currentPath);
}
}
//show file list
else if (command == COMMAND_LIST || command == COMMAND_MLSD) {
string param;
recvStream>>param;
msg = TS_FTP_STATUS_OPEN_DATA_CHANNEL;
sendResponse(m_connFd, msg);
int newFd = getDataSocket();
//get files in directory
string dirPath = ROOT_PATH+currentPath;
DIR *dir = opendir(dirPath.c_str());
struct dirent *ent;
struct stat s;
stringstream stream;
while ((ent = readdir(dir))!=NULL) {
string filePath = dirPath + ent->d_name;
stat(filePath.c_str(), &s);
struct tm tm = *gmtime(&s.st_mtime);
//list with -l param
if (param == "-l") {
stream<<s.st_mode<<" "<<s.st_nlink<<" "<<s.st_uid<<" "<<s.st_gid<<" "<<setw(10)<<s.st_size<<" "<<tm.tm_mon<<" "<<tm.tm_mday<<" "<<tm.tm_year<<" "<<ent->d_name<<endl;
}else {
stream<<ent->d_name<<endl;
}
}
closedir(dir);
//send file info
string fileInfo = stream.str();
cout<<fileInfo;
send(newFd, fileInfo.c_str(), fileInfo.size(), 0);
//close client
close(newFd);
//send transfer ok
msg = TS_FTP_STATUS_TRANSFER_OK;
}
//send file
else if (command == COMMAND_RETRIEVE) {
recvStream>>fileName;
msg = TS_FTP_STATUS_TRANSFER_START(fileName);
sendResponse(m_connFd, msg);
int newFd = getDataSocket();
//send file
std::ifstream file(ROOT_PATH+currentPath+fileName);
file.seekg(0, std::ifstream::beg);
while(file.tellg() != -1)
{
char *p = new char[1024];
bzero(p, 1024);
file.read(p, 1024);
int n = (int)send(newFd, p, 1024, 0);
if (n < 0) {
cout<<"ERROR writing to socket"<<endl;
break;
}
delete p;
}
file.close();
//close client
close(newFd);
//send transfer ok
msg = TS_FTP_STATUS_FILE_SENT;
}
//receive file
else if (command == COMMAND_STORE) {
recvStream>>fileName;
msg = TS_FTP_STATUS_UPLOAD_START;
sendResponse(m_connFd, msg);
int newFd = getDataSocket();
//receive file
ofstream file;
file.open(ROOT_PATH+currentPath+fileName, ios::out | ios::binary);
char buff[1024];
while (1) {
int n = (int)recv(newFd, buff, sizeof(buff), 0);
if (n<=0) break;
file.write(buff, n);
}
file.close();
//close client
close(newFd);
//send transfer ok
msg = TS_FTP_STATUS_FILE_RECEIVE;
}
//get support command
else if (command == COMMAND_FEAT) {
stringstream stream;
stream<<"211-Extension supported"<<endl;
stream<<COMMAND_SIZE<<endl;
stream<<"211 End"<<endl;;
msg = stream.str();
}
//get parent directory
else if (command == COMMAND_CDUP) {
if (currentPath != "/") {
char path[256];
strcpy(path, currentPath.c_str());
char *ext = strtok(path, "/");
char *lastExt = ext;
while (ext!=NULL) {
ext = strtok(NULL, "/");
if (ext) lastExt = ext;
}
currentPath = currentPath.substr(0, currentPath.length()-strlen(lastExt)-1);
}
msg = TS_FTP_STATUS_CDUP(currentPath);
}
//delete file
else if (command == COMMAND_DELETE) {
recvStream>>fileName;
//delete file
if (remove((ROOT_PATH+currentPath+fileName).c_str()) == 0) {
msg = TS_FTP_STATUS_DELETE;
}else {
printf("delete error: %s(errno: %d)
",strerror(errno),errno);
msg = TS_FTP_STATUS_DELETE_FAILED;
}
}
//other
else if (command == COMMAND_NOOP || command == COMMAND_OPTS){
msg = TS_FTP_STATUS_OK;
}
sendResponse(m_connFd, msg);
return isClose;
}以上代码针对每种命令进行了不同的处理，在这里不具体说明。须要注意的是。文中採用的if-else方法推断命令效率是非常低的。时间复杂度为O(n)（n为命令总数），有两种方法能够进行优化。一是因为FTP命令都是4个字母组成的。能够将4个字母的ascii码拼接成一个整数，使用switch进行推断。时间复杂度为O(1)；二是类似Httpserver中的方法，将每一个命令以及对应的处理函数存到hashmap中，收到一个命令时能够通过hash直接调用对应的函数，时间复杂度相同为O(1)。
另外，以上代码中的PORT命令处理时涉及对ip地址的解析。须要注意本机字节顺序和网络字节顺序的差别。如127.0.0.1转换成整数应逆序转换，以网络字节顺序存到s_addr变量中。
以上源代码已经上传到GitHub中，感兴趣的朋友能够前往下载。
假设大家认为对自己有帮助的话，还希望能帮顶一下，谢谢：）
转载请注明出处。谢谢！