前言
每种语言都有自己的测试姿势，golang的作者提供了一个testing的包来供大家完成测试之旅，简单好用，一起走一波。
10s后以下知识点即将靠近：
1.为什么需要测试？
2.Golang的测试规矩
3.功能测试
4.压力测试
5.测试代码的覆盖率测试
6.测试所有的参数备忘
正文
1.为什么需要测试？
这个是一个老生常谈的话题了，忘记哪里看的数据了，表明是完善的测试体系（这里主要指自测），其实是会***提高开发效率***的。
当项目足够复杂的时候，想要保证尽可能少的bug，两种方式最有效：1.代码审核 2.测试。
所以Golang官方提供了testing包来满足大家的需求。
2.Golang的测试规矩
通过testing包我们主要是可以进行三个测试的姿势：1.功能测试 2.压力测试 3.测试代码覆盖率的测试(你写的测试用例覆盖了多少代码)。
在介绍以上三点之前，有一些Golang官方的一些约定（也可以说测试规矩）是需要遵守的，否则Golang是不承认你写的测试代码的。
|
关键点 |
说明 |
|
导入需要的包 |
import testing (如果你是goland,那么可以忽略，因为ide就自动帮你加上) |
|
执行命令 |
go test file_test.go |
|
测试文件命名 |
必须以_test.go结尾 |
|
功能测试的用力函数 |
必须以Test开头&&后头跟着的函数名不能以小写字母开头，比如：Testcbs 就是不行的，TestCbs就是ok的 |
|
功能测试参数 |
testing.T |
|
压力测试用例函数 |
必须以Benchmark开头&&其后的函数名不能以小写字母开头(例子同上) |
|
压力测试参数 |
testing.B |
|
测试信息 |
.Log方法，默认情况下是不会显示的，只有在go test -v的时候显示 |
|
测试控制 |
通过Error/Errorf/FailNow/Fatal等来进行测试是否是失败，或者在失败的情况下的控制 |
|
压力测试命令 |
go test -test.bench file_test.go |
|
压力测试的循环体 |
使用test.B.N |
3.功能测试
我是创建了一个文件夹ormdifff，里头存在一个测试文件diff_test.go
上代码:
diff_test.go
可以执行命令行：go test -v diff_test.go
在上面的图中可以看到第8行函数前面有个绿色三角箭头标志，单击，会出现以下几种测试菜单，覆盖率测试，cpu，内存性能监测，block，mutext分析等测试功能，通过run，可以看到如下结果：
4.压力测试
diff_test.go改造代码为压力测试
命令行执行：go test -bench=.diff_test.go
5.代码覆盖率测试
命令执行：go test -cover -bench=.diff_test.go
在goland中点击执行，如下：
6.性能测试
略
7.测试所有的参数备忘
The test binary also accepts flags that control execution of the test; these
flags are also accessible by ‘go test’.
-bench regexp
Run only those benchmarks matching a regular expression.
By default, no benchmarks are run.
To run all benchmarks, use '-bench .' or '-bench=.'.
The regular expression is split by unbracketed slash (/)
characters into a sequence of regular expressions, and each
part of a benchmark's identifier must match the corresponding
element in the sequence, if any. Possible parents of matches
are run with b.N=1 to identify sub-benchmarks. For example,
given -bench=X/Y, top-level benchmarks matching X are run
with b.N=1 to find any sub-benchmarks matching Y, which are
then run in full.
-benchtime t
Run enough iterations of each benchmark to take t, specified
as a time.Duration (for example, -benchtime 1h30s).
The default is 1 second (1s).
-count n
Run each test and benchmark n times (default 1).
If -cpu is set, run n times for each GOMAXPROCS value.
Examples are always run once.
-cover
Enable coverage analysis.
Note that because coverage works by annotating the source
code before compilation, compilation and test failures with
coverage enabled may report line numbers that don't correspond
to the original sources.
-covermode set,count,atomic
Set the mode for coverage analysis for the package[s]
being tested. The default is "set" unless -race is enabled,
in which case it is "atomic".
The values:
set: bool: does this statement run?
count: int: how many times does this statement run?
atomic: int: count, but correct in multithreaded tests;
significantly more expensive.
Sets -cover.
-coverpkg pattern1,pattern2,pattern3
Apply coverage analysis in each test to packages matching the patterns.
The default is for each test to analyze only the package being tested.
See 'go help packages' for a description of package patterns.
Sets -cover.
-cpu 1,2,4
Specify a list of GOMAXPROCS values for which the tests or
benchmarks should be executed. The default is the current value
of GOMAXPROCS.
-failfast
Do not start new tests after the first test failure.
-list regexp
List tests, benchmarks, or examples matching the regular expression.
No tests, benchmarks or examples will be run. This will only
list top-level tests. No subtest or subbenchmarks will be shown.
-parallel n
Allow parallel execution of test functions that call t.Parallel.
The value of this flag is the maximum number of tests to run
simultaneously; by default, it is set to the value of GOMAXPROCS.
Note that -parallel only applies within a single test binary.
The 'go test' command may run tests for different packages
in parallel as well, according to the setting of the -p flag
(see 'go help build').
-run regexp
Run only those tests and examples matching the regular expression.
For tests, the regular expression is split by unbracketed slash (/)
characters into a sequence of regular expressions, and each part
of a test's identifier must match the corresponding element in
the sequence, if any. Note that possible parents of matches are
run too, so that -run=X/Y matches and runs and reports the result
of all tests matching X, even those without sub-tests matching Y,
because it must run them to look for those sub-tests.
-short
Tell long-running tests to shorten their run time.
It is off by default but set during all.bash so that installing
the Go tree can run a sanity check but not spend time running
exhaustive tests.
-timeout d
If a test binary runs longer than duration d, panic.
If d is 0, the timeout is disabled.
The default is 10 minutes (10m).
-v
Verbose output: log all tests as they are run. Also print all
text from Log and Logf calls even if the test succeeds.
-vet list
Configure the invocation of "go vet" during "go test"
to use the comma-separated list of vet checks.
If list is empty, "go test" runs "go vet" with a curated list of
checks believed to be always worth addressing.
If list is "off", "go test" does not run "go vet" at all.