centos7安装ELK

Elasticsearch

Elasticsearch是个开源分布式搜索引擎，提供搜集、分析、存储数据三大功能。它的特点有：分布式，零配置，自动发现，索引自动分片，索引副本机制，restful风格接口，多数据源，自动搜索负载等。

Logstash

数据收集引擎。它支持动态的从各种数据源搜集数据，并对数据进行过滤、分析、丰富、统一格式等操作，然后存储到用户指定的位置。

FileBeat

ELK 协议栈的新成员，一个轻量级开源日志文件数据搜集器，基于 Logstash-Forwarder 源代码开发，是对它的替代。在需要采集日志数据的 server 上安装 Filebeat，并指定日志目录或日志文件后，Filebeat 就能读取数据，迅速发送到 Logstash 进行解析，亦或直接发送到 Elasticsearch 进行集中式存储和分析。
Filebeat隶属于Beats。目前Beats包含六种工具：
Packetbeat（搜集网络流量数据）
Metricbeat（搜集系统、进程和文件系统级别的 CPU 和内存使用情况等数据）
Filebeat（搜集文件数据）
Winlogbeat（搜集 Windows 事件日志数据）
Auditbeat（ 轻量型审计日志采集器）
Heartbeat（轻量级服务器健康采集器）

Kibana

Kibana可以为 Logstash 、Beats和 ElasticSearch 提供的日志分析友好的 Web 界面，可以帮助汇总、分析和搜索重要数据日志。

安装前环境准备

1.修改limit.conf文件的配置
vim /etc/security/limit.conf  若有下面的内容则将数字修改为65536，若没有则添加
* hard nofile 65536
* soft nofile 65536
* soft nproc  65536
* hard nproc  65536
2.修改sysctl.conf文件的配置
vim /etc/sysctl.conf
vm.max_map_count = 262144
net.core.somaxconn=65535
net.ipv4.ip_forward = 1
3.执行sysctl -p 使上面的配置生效

安装linux版本的jdk8

参考链接进行jdk8安装：http://www.dyfblogs.com/post/centos_install_jdk8/

下载6.2.4版本的E，L，K

注意：Elasticsearch、Kibana、FileBeat一定要使用相同的版本
ELK+Filebeat, 每个节点安装Filebeat收集日志，然后将日志传给logstash
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-6.2.4.rpm
wget https://artifacts.elastic.co/downloads/kibana/kibana-6.2.4-x86_64.rpm
wget https://artifacts.elastic.co/downloads/logstash/logstash-6.2.4.rpm
Linux节点服务器需下载
wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-6.2.4-x86_64.rpm
ll
-----------------------------------------------------------------------
total 270628
-rw-r--r-- 1 root root  28992177 Dec 30 23:27 elasticsearch-6.2.4.rpm
-rw-r--r-- 1 root root  12699052 Dec 30 23:28 filebeat-6.2.4-x86_64.rpm
-rw-r--r-- 1 root root  87218216 Dec 30 23:27 kibana-6.2.4-x86_64.rpm
-rw-r--r-- 1 root root 148204622 Dec 30 23:28 logstash-6.2.4.rpm
将filebeat-6.2.4-x86_64.rpm cp到需要收集日志的节点

安装ELK

1.安装elasticsearch
# rpm -ivh elasticsearch-6.2.4.rpm 
warning: elasticsearch-6.2.4.rpm: Header V4 RSA/SHA512 Signature, key ID d88e42b4: NOKEY
Preparing...                          ################################# [100%]
Creating elasticsearch group... OK
Creating elasticsearch user... OK
Updating / installing...
   1:elasticsearch-0:6.2.4-1          ################################# [100%]
### NOT starting on installation, 
### please execute the following statements to configure elasticsearch service to start automatically using systemd
 sudo systemctl daemon-reload
 sudo systemctl enable elasticsearch.service
### You can start elasticsearch service by executing
 sudo systemctl start elasticsearch.service
2.安装kibana
]# rpm -ivh kibana-6.2.4-x86_64.rpm 
warning: kibana-6.2.4-x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID d88e42b4: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
   1:kibana-6.2.4-1                   ################################# [100%]
3.安装logstash
# rpm -ivh logstash-6.2.4.rpm 
warning: /home/elk_files/rpm_type/logstash-6.2.4.rpm: Header V4 RSA/SHA512 Signature, key ID d88e42b4: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
   1:logstash-1:6.2.4-1               ################################# [100%]
Using provided startup.options file: /etc/logstash/startup.options
Successfully created system startup script for Logstash

4.创建ELK存放数据和日志的目录
# mkdir -pv /home/data/elasticsearch/{data,logs}
mkdir: created directory ‘/home/data’
mkdir: created directory ‘/home/data/elasticsearch’
mkdir: created directory ‘/home/data/elasticsearch/data’
mkdir: created directory ‘/home/data/elasticsearch/logs’

# mkdir -pv /home/data/logstash/{data,logs}
mkdir: created directory ‘/home/data/logstash’
mkdir: created directory ‘/home/data/logstash/data’
mkdir: created directory ‘/home/data/logstash/logs’

5.为elasticsearch和logstash创建用户并对home/data/logstash和/home/data/elasticsearch授权
useradd elastic
echo "123456" | passwd elastic --stdin
chown -R elastic.elastic /home/data/elasticsearch

useradd logsth
echo "123456" | passwd logsth --stdin
chown -R logstash.logstash home/data/logstash

修改ELK配置文件

1.修改elasticsearch文件
vi /etc/elasticsearch/elasticsearch.yml
path.data: /data/elasticsearch/data
path.logs: /data/elasticsearch/logs
network.host: 0.0.0.0
http.port: 9200
2.修改logstash文件
vi /etc/logstash/logstash.yml
path.data: /data/logstash/data
path.logs: /data/logstash/logs
path.config: /etc/logstash/conf.d

vim /etc/logstash/conf.d/logstash.conf  # 添加如下内容
input {
  beats {
    port => 5044
    codec => plain {
          charset => "UTF-8"
    }
  }
}

output {
  elasticsearch {
    hosts => "127.0.0.1:9200"
    manage_template => false
    index => "%{[@metadata][beat]}-%{+YYYY.MM.dd}"
    document_type => "%{[@metadata][type]}"
  }
}
3.修改kibana文件
vi /etc/kibana/kibana.yml
server.port: 5601
server.host: "192.168.2.207"
elasticsearch.url: "http://localhost:9200"

启动ELK

1.重新加载所有配置文件
systemctl daemon-reload
2.启动elasticsearch
systemctl start elasticsearch
3.设置elasticsearch开机启动
systemctl enable elasticsearch
注意：elasticsearch的配置文件的用户要和/home/data/elasticsearch 的用户一样，rpm包安装的elasticsearch的配置文件默认用户为elasticsearch
4.启动logstash
systemctl start logstash
5.设置logstash开机启动
systemctl enable logstash
6.启动kibana
systemctl start kibana
7.设置kibana开机启动
systemctl enable kibana

查看端口是否已监听

ss -tnl

查看elasticsearch状态

curl -XGET 'http://192.168.188.133:9200/_cluster/state/nodes?pretty'

查看elasticsearch的master

curl -XGET 'http://192.168.188.133:9200/_cluster/state/master_node?pretty'


curl -XGET 'http://192.168.188.133:9200/_cat/master?v'

查看健康状态

curl -XGET 'http://192.168.188.133:9200/_cat/health?v'


curl -XGET 'http://192.168.188.133:9200/_cluster/health?pretty'

需要收集日志的节点安装Filebeat

进入filebeat-6.2.4-x86_64.rpm所在目录
# rpm -ivh filebeat-6.2.4-x86_64.rpm 
warning: filebeat-6.2.4-x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID d88e42b4: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
   1:filebeat-6.2.4-1                 ################################# [100%]

修改Filebeat配置

vi /etc/filebeat/filebeat.yml
-----------------------------------------------------------
- type: log
  enabled: true
    - /var/log/*.log
    -  /var/log/messages
         -  /var/log/containers/*.log
setup.kibana:
  host: "192.168.188.133:5601"
#output.elasticsearch:    //我们输出到logstash，把这行注释掉
  #hosts: ["localhost:9200"]   //这行也注释掉
output.logstash:
  hosts: ["192.168.188.133:5044"]

启动Filebeat

systemctl start filebeat
systemctl enable filebeat

访问kibana： 192.168.188.133:5601


第一个框中输入filebeat-*, 然后点击Next step

然后选择@timestamp，点击create index pattern

创建好后，点击左上角Discover，就可以看到如下图所示的日志内容了

安装配置iptables

1.安装iptables工具(若有该工具，则无需安装)
yum -y install iptables iptables-services
2.修改iptables文件添加端口策略
vim /etc/sysconfig/iptables
-A INPUT -p tcp -m state --state NEW -m tcp --dport 9200 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5601 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 5044 -j ACCEPT
3.设置防火墙zone
firewall-cmd --zone=public --add-port=8081/tcp --permanent
4.重新加载防火墙配置
firewall-cmd --reload

本文作者：温茶又折花

本文链接： https://www.cnblogs.com/dyfblogs/p/14961439.html

转载文章请注明作者和出处，谢谢！
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/dyfblogs/p/14961439.html