storcli64 查看raid

[root@localhost ~]# ./storcli64 show ctrlcount  ---查看raid数量
Status Code = 0
Status = Success
Description = None

Controller Count = 1


[root@localhost ~]#
[root@localhost ~]# ./storcli64  /c0 /v0 show   ---查看raid结构,虚拟硬盘
Controller = 0
Status = Success
Description = None


Virtual Drives :
==============

---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name 
---------------------------------------------------------------
0/0   RAID0 Optl  RW     Yes     RWTD  -   ON  446.625 GB      
---------------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency



[root@localhost ~]#
[root@localhost ~]# ./storcli64 /c0 /eall /sall show  ---查看物理硬盘
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.


Drive Information :
=================

----------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model               Sp 
----------------------------------------------------------------------------
8:0      11 JBOD  -    3.637 TB SATA HDD N   N  512B ST4000NM000A-2HZ100 U  
8:1       9 JBOD  -    3.637 TB SATA HDD N   N  512B ST4000NM000A-2HZ100 U  
8:12     21 JBOD  -  446.625 GB SATA SSD N   N  512B Maxtor Z1 SSD 480GB U  
8:13     22 Onln  0  446.625 GB SATA SSD N   N  512B Maxtor Z1 SSD 480GB U  
----------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down/PowerSave|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded



[root@localhost ~]# lsblk
NAME            MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda               8:0    0   3.7T  0 disk 
├─sda1            8:1    0   200M  0 part 
├─sda2            8:2    0     1G  0 part 
└─sda3            8:3    0 445.4G  0 part 
  ├─klas-swap   252:2    0     4G  0 lvm  
  └─klas-root   252:3    0 441.4G  0 lvm  
sdb               8:16   0   3.7T  0 disk 
├─sdb1            8:17   0   1.9T  0 part 
├─sdb2            8:18   0   1.3T  0 part 
└─sdb4            8:20   0   1.6T  0 part 
sdc               8:32   0 447.1G  0 disk 
sdd               8:48   0 446.6G  0 disk 
├─sdd1            8:49   0   200M  0 part /boot/efi
├─sdd2            8:50   0     1G  0 part /boot
└─sdd3            8:51   0 445.4G  0 part 
  ├─klas00-root 252:0    0 441.4G  0 lvm  /
  └─klas00-swap 252:1    0     4G  0 lvm  [SWAP]
sr0              11:0    1  1024M  0 rom  
sr1              11:1    1  1024M  0 rom  
sr2              11:2    1  1024M  0 rom  
sr3              11:3    1  1024M  0 rom  
[root@localhost ~]#
[root@localhost ~]# ./storcli64 show all
Segmentation fault (core dumped)
[root@localhost ~]# ./storcli64 /c0 show all
Generating detailed summary of the adapter, it may take a while to complete.

Controller = 0
Status = Failure
Description = None

Detailed Status :
===============

------------------------------------------------
Ctrl Status ErrCd ErrMsg                        
------------------------------------------------
   0 Failed   255 Failed to get Bus Information 
------------------------------------------------



Basics :
======
Controller = 0
Model = AVAGO MegaRAID SAS 9361-8i 2GB
Serial Number = SK84171618
Current Controller Date/Time = 09/05/2019, 09:28:34
Current System Date/time = 09/05/2019, 17:28:34
SAS Address = 500605b00ece47f0
PCI Address = NA
Mfg Date = 10/12/18
Rework Date = 00/00/00
Revision No = 22002


Version :
=======
Firmware Package Build = 24.21.0-0017
Firmware Version = 4.680.00-8274
CPLD Version = 26747-01A
Bios Version = 6.36.00.1_4.19.08.00_0x06180202
HII Version = 03.25.05.03
Ctrl-R Version = 5.19-0601
Preboot CLI Version = 01.07-05:#%0000
NVDATA Version = 3.1705.00-0005
Boot Block Version = 3.07.00.00-0003
Driver Name = megaraid_sas
Driver Version = 07.706.03.00-rc1


Bus :
===
Vendor Id = 0x1000
Device Id = 0x5D
SubVendor Id = 0x1000
SubDevice Id = 0x9361
Host Interface = PCI-E
Device Interface = SAS-12G


Pending Images in Flash :
=======================
Image name = No pending images


Status :
======
Controller Status = Optimal
Memory Correctable Errors = 0
Memory Uncorrectable Errors = 0
ECC Bucket Count = 0
Any Offline VD Cache Preserved = No
BBU Status = NA
PD Firmware Download in progress = No
Lock Key Assigned = No
Failed to get lock key on bootup = No
Lock key has not been backed up = No
Bios was not detected during boot = No
Controller must be rebooted to complete security operation = No
A rollback operation is in progress = No
At least one PFK exists in NVRAM = Yes
SSC Policy is WB = No
Controller has booted into safe mode = No
Current Personality = RAID-Mode


Supported Adapter Operations :
============================
Rebuild Rate = Yes
CC Rate = Yes
BGI Rate  = Yes
Reconstruct Rate = Yes
Patrol Read Rate = Yes
Alarm Control = Yes
Cluster Support = No
BBU  = Yes
Spanning = Yes
Dedicated Hot Spare = Yes
Revertible Hot Spares = Yes
Foreign Config Import = Yes
Self Diagnostic = Yes
Allow Mixed Redundancy on Array = No
Global Hot Spares = Yes
Deny SCSI Passthrough = No
Deny SMP Passthrough = No
Deny STP Passthrough = No
Support more than 8 Phys = Yes
FW and Event Time in GMT = No
Support Enhanced Foreign Import = Yes
Support Enclosure Enumeration = Yes
Support Allowed Operations = Yes
Abort CC on Error = Yes
Support Multipath = Yes
Support Odd & Even Drive count in RAID1E = No
Support Security = No
Support Config Page Model = Yes
Support the OCE without adding drives = Yes
Support EKM = No
Snapshot Enabled = No
Support PFK = Yes
Support PI = Yes
Support LDPI Type1 = No
Support LDPI Type2 = No
Support LDPI Type3 = No
Support Ld BBM Info = No
Support Shield State = Yes
Block SSD Write Disk Cache Change = Yes
Support Suspend Resume BG ops = Yes
Support Emergency Spares = Yes
Support Set Link Speed = Yes
Support Boot Time PFK Change = No
Support JBOD = Yes
Disable Online PFK Change = No
Support Perf Tuning = Yes
Support SSD PatrolRead = Yes
Real Time Scheduler = Yes
Support Reset Now = Yes
Support Emulated Drives = Yes
Headless Mode = Yes
Dedicated HotSpares Limited = No
Point In Time Progress = Yes
Extended LD = Yes
Boot Volume Supported = No
Support Uneven span  = No
Support Config Auto Balance = No
Support Maintenance Mode = No
Support Diagnostic results = Yes
Support Ext Enclosure = Yes
Support Sesmonitoring = Yes
Support SecurityonJBOD = Yes
Support ForceFlash = Yes
Support DisableImmediateIO = Yes
Support LargeIOSupport = Yes
Support DrvActivityLEDSetting = Yes
Support FlushWriteVerify = Yes
Support CPLDUpdate = Yes
Support ForceTo512e = Yes
Support discardCacheDuringLDDelete = Yes
Support JBOD Write cache = No
Support Large QD Support = No
Support Ctrl Info Extended = No
Support IButton less = No
Support AES Encryption Algorithm = No
Support Encrypted MFC = No


Supported PD Operations :
=======================
Force Online = Yes
Force Offline = Yes
Force Rebuild = Yes
Deny Force Failed = No
Deny Force Good/Bad = No
Deny Missing Replace = No
Deny Clear = No
Deny Locate = No
Support Power State = Yes
Set Power State For Cfg = No
Support T10 Power State = No
Support Temperature = Yes
NCQ = Yes
Support Max Rate SATA = No
Support Degraded Media = No
Support Parallel FW Update = Yes
Support Drive Crypto Erase = Yes


Supported VD Operations :
=======================
Read Policy = Yes
Write Policy = Yes
IO Policy = Yes
Access Policy = Yes
Disk Cache Policy = Yes
Reconstruction = Yes
Deny Locate = No
Deny CC = No
Allow Ctrl Encryption = No
Enable LDBBM = Yes
Support FastPath = Yes
Performance Metrics = Yes
Power Savings = No
Support Powersave Max With Cache = No
Support Breakmirror = Yes
Support SSC WriteBack = No
Support SSC Association = No
Support VD Hide = Yes
Support VD Cachebypass = Yes
Support VD discardCacheDuringLDDelete = Yes


Advanced Software Option :
========================

----------------------------------------
Adv S/W Opt        Time Remaining  Mode 
----------------------------------------
MegaRAID FastPath  Unlimited       -    
MegaRAID RAID6     Unlimited       -    
MegaRAID RAID5     Unlimited       -    
----------------------------------------

Safe ID =  NSHHBGAKBJNNVM68G96T5LJB8PDMFXGPPBM3Q9AZ

HwCfg :
=====
ChipRevision =  C0
BatteryFRU = N/A
Front End Port Count = 0
Backend Port Count = 8
BBU = Absent
Alarm = On
Serial Debugger = Present
NVRAM Size = 32KB
Flash Size = 16MB
On Board Memory Size = 2048MB
CacheVault Flash Size = NA
TPM = Absent
Upgrade Key = Absent
On Board Expander = Absent
Temperature Sensor for ROC = Present
Temperature Sensor for Controller = Absent
Upgradable CPLD = Present
Current Size of CacheCade (GB) = 0
Current Size of FW Cache (MB) = 1715
ROC temperature(Degree Celsius) = 68


Policies :
========

Policies Table :
==============

------------------------------------------------
Policy                          Current Default 
------------------------------------------------
Predictive Fail Poll Interval   300 sec         
Interrupt Throttle Active Count 16              
Interrupt Throttle Completion   50 us           
Rebuild Rate                    30 %    30%     
PR Rate                         30 %    30%     
BGI Rate                        30 %    30%     
Check Consistency Rate          30 %    30%     
Reconstruction Rate             30 %    30%     
Cache Flush Interval            4s              
------------------------------------------------

Flush Time(Default) = 4s
Drive Coercion Mode = none
Auto Rebuild = On
Battery Warning = On
ECC Bucket Size = 15
ECC Bucket Leak Rate (hrs) = 24
Restore HotSpare on Insertion = Off
Expose Enclosure Devices = On
Maintain PD Fail History = Off
Reorder Host Requests = On
Auto detect BackPlane = SGPIO/i2c SEP
Load Balance Mode = Auto
Security Key Assigned = Off
Disable Online Controller Reset = Off
Use drive activity for locate = Off


Boot :
====
BIOS Enumerate VDs = 1
Stop BIOS on Error = Off
Delay during POST = 0
Spin Down Mode = None
Enable Ctrl-R = Yes
Enable Web BIOS = No
Enable PreBoot CLI = No
Enable BIOS = Yes
Max Drives to Spinup at One Time = 2
Maximum number of direct attached drives to spin up in 1 min = 10
Delay Among Spinup Groups (sec) = 12
Allow Boot with Preserved Cache = Off


High Availability :
=================
Topology Type = None
Cluster Permitted = No
Cluster Active = No


Defaults :
========
Phy Polarity = 0
Phy PolaritySplit = 0
Strip Size = 256 KB
Write Policy = WB
Read Policy = RA
Cache When BBU Bad = Off
Cached IO = Off
VD PowerSave Policy = Controller Defined
Default spin down time (mins) = 30
Coercion Mode = None
ZCR Config = Unknown
Max Chained Enclosures = 16
Direct PD Mapping = No
Restore Hot Spare on Insertion = No
Expose Enclosure Devices = Yes
Maintain PD Fail History = Yes
Zero Based Enclosure Enumeration = No
Disable Puncturing = No
EnableLDBBM = Yes
DisableHII = No
Un-Certified Hard Disk Drives = Allow
SMART Mode = Mode 6
Enable LED Header = Yes
LED Show Drive Activity = Yes
Dirty LED Shows Drive Activity = No
EnableCrashDump = Yes
Disable Online Controller Reset = No
Treat Single span R1E as R10 = No
Power Saving option = Enabled
TTY Log In Flash = No
Auto Enhanced Import = Yes
BreakMirror RAID Support = Yes
Disable Join Mirror = Yes
Enable Shield State = Yes
Time taken to detect CME = 60 sec


Capabilities :
============
Supported Drives = SAS, SATA
Boot Volume Supported = NO
RAID Level Supported = RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50
, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, 
PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Enable JBOD = Yes
Mix in Enclosure = Allowed
Mix of SAS/SATA of HDD type in VD = Allowed
Mix of SAS/SATA of SSD type in VD = Allowed
Mix of SSD/HDD in VD = Allowed
SAS Disable = No
Max Arms Per VD = 32
Max Spans Per VD = 8
Max Arrays = 128
Max VD per array = 16
Max Number of VDs = 64
Max Parallel Commands = 928
Max SGE Count = 60
Max Data Transfer Size = 8192 sectors
Max Strips PerIO = 128
Max Configurable CacheCade Size(GB) = 0
Max Transportable VDs = 0
Min Strip Size = 64 KB
Max Strip Size = 1.0 MB


Scheduled Tasks :
===============
Consistency Check Reoccurrence = 168 hrs
Next Consistency check launch = 08/08/2020, 03:00:00
Patrol Read Reoccurrence = 168 hrs
Next Patrol Read launch = 08/08/2020, 03:00:00
Battery learn Reoccurrence = NA
Next Battery Learn = NA
OEMID = AVAGO

Drive Groups = 1

TOPOLOGY :
========

-----------------------------------------------------------------------------
DG Arr Row EID:Slot DID Type  State BT       Size PDC  PI SED DS3  FSpace TR 
-----------------------------------------------------------------------------
 0 -   -   -        -   RAID0 Optl  N  446.625 GB dflt N  N   none N      N  
 0 0   -   -        -   RAID0 Optl  N  446.625 GB dflt N  N   none N      N  
 0 0   0   8:13     22  DRIVE Onln  N  446.625 GB dflt N  N   none -      N  
-----------------------------------------------------------------------------

DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Dgrd=Degraded
Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active
PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign
DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present
TR=Transport Ready

Virtual Drives = 1

VD LIST :
=======

---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name 
---------------------------------------------------------------
0/0   RAID0 Optl  RW     Yes     RWTD  -   ON  446.625 GB      
---------------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency

Physical Drives = 4

PD LIST :
=======

----------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model               Sp 
----------------------------------------------------------------------------
8:0      11 JBOD  -    3.637 TB SATA HDD N   N  512B ST4000NM000A-2HZ100 U  
8:1       9 JBOD  -    3.637 TB SATA HDD N   N  512B ST4000NM000A-2HZ100 U  
8:12     21 JBOD  -  446.625 GB SATA SSD N   N  512B Maxtor Z1 SSD 480GB U  
8:13     22 Onln  0  446.625 GB SATA SSD N   N  512B Maxtor Z1 SSD 480GB U  
----------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down/PowerSave|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded



[root@localhost ~]# 

 

[root@localhost ~]# ./storcli64 /c0/vall show 
Controller = 0
Status = Success
Description = None


Virtual Drives :
==============

---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name 
---------------------------------------------------------------
0/0   RAID0 Optl  RW     Yes     RWTD  -   ON  446.625 GB      
---------------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency



[root@localhost ~]# ./storcli64 /c0/v0 show 
Controller = 0
Status = Success
Description = None


Virtual Drives :
==============

---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name 
---------------------------------------------------------------
0/0   RAID0 Optl  RW     Yes     RWTD  -   ON  446.625 GB      
---------------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency



[root@localhost ~]#
6、查看raid组详细信息
 
查看系统里面有几个raid组:
[root@localhost storcli]# ./storcli64 /c0/vall  show 【查看c0控制下的所有RAID信息】
Controller = 0
Status = Success
Description = None
 
 
Virtual Drives :
==============
 
---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name
---------------------------------------------------------------
0/0   RAID1 Optl  RW     Yes     RaWBD R   OFF 278.875 GB      
1/1   RAID5 Optl  RW     Yes     RaWBD R   OFF   4.089 TB      
2/2   RAID5 Optl  RW     Yes     RaWBD R   OFF   4.089 TB      【显示系统有三个raid组】
---------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
Ra=Read Ahead Adaptive|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
 
查看V0  (虚拟磁盘0) raid的详细信息
[root@localhost storcli]# ./storcli64 /c0/v0 show all
Controller = 0
Status = Success
Description = None
 
 
/c0/v0 :
======
 
---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC       Size Name
---------------------------------------------------------------
0/0   RAID1 Optl  RW     Yes     RaWBD R   OFF 278.875 GB      【V0为RAID1】
---------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
Ra=Read Ahead Adaptive|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
PDs for VD 0 :
============
 
-------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model            Sp
-------------------------------------------------------------------------
32:24    24 Onln   0 278.875 GB SAS  HDD N   N  512B ST9300603SS      U  
32:25    25 Onln   0 278.875 GB SAS  HDD N   N  512B ST9300605SS      U  【可以看到24号和25号盘组成了raid1】
-------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
 
 
VD0 Properties :
==============
Strip Size = 64 KB
Span Depth = 1
Number of Drives Per Span = 2
Disk Cache Policy = Disk's Default
Encryption = None
Data Protection = None
Active Operations = None
Exposed to OS = Yes
Creation Date = 05-09-2012
Creation Time = 01:38:23 PM
Emulation type = None
 
使用方式
#查询硬件RAID卡信息
[root@localhost Linux]# cat /proc/scsi/scsi |more

Attached devices:
Host: scsi0 Channel: 02 Id: 00 Lun: 00
  Vendor: IBM      Model: ServeRAID M5210  Rev: 4.62
  Type:   Direct-Access                    ANSI  SCSI revision: 05

#解压安装storcli
unzip ibm_utl_sraidmr_storcli-1.07.07_linux_32-64.zip
rpm -Uvh storcli-1.07.07-1.noarch.rpm

#设置软连接
ln -s /opt/MegaRAID/storcli/storcli64 /bin/storcli
ln -s /opt/MegaRAID/storcli/storcli64 /sbin/storcli

#Raid数量及当前状态
[root@localhost Linux]# storcli show ctrlcount
Status Code = 0
Status = Success
Description = None

Controller Count = 2

#查询虚拟磁盘大小,raid结构等
[root@localhost Linux]# storcli /c0 /v0 show
Controller = 0
Status = Success
Description = None


Virtual Drives :
==============

-----------------------------------------------------------
DG/VD TYPE  State Access Consist Cache sCC       Size Name 
-----------------------------------------------------------
0/0   RAID1 Optl  RW     Yes     RWTD  -   278.465 GB      
-----------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
#可以看出此为RAID1,一个虚拟磁盘,大小为278.465 GB 

#查看control0的物理硬盘
[root@localhost Linux]# storcli /c0 /eall /sall show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.


Drive Information :
=================

-------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model            Sp 
-------------------------------------------------------------------------
252:16    8 Onln   0 278.465 GB SAS  HDD N   Y  512B ST300MP0035    X U  
252:17    9 Onln   0 278.465 GB SAS  HDD N   Y  512B ST300MP0035    X U  
-------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded

#可以看到总计有两颗硬盘,每一颗大小278.465GB,是否在线等

#查看control1的物理硬盘
[root@localhost Linux]# storcli /c1 /eall /sall show
Controller = 1
Status = Success
Description = Show Drive Information Succeeded.


Drive Information :
=================

------------------------------------------------------------------------
EID:Slt DID State DG      Size Intf Med SED PI SeSz Model            Sp 
------------------------------------------------------------------------
8:0      23 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:1      24 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:2      22 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:3      19 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:4      13 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:5      14 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:6      18 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:7      12 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:8      10 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:9      16 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:10     11 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:11     21 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:12     15 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
8:13      9 JBOD  -  1.0810 TB SAS  HDD N   Y  512B ST1200MM0018   X U  
------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded

#可以看到总计有两颗硬盘,每一颗大小1.0810 TB,是否在线等


#设置硬盘状态
storcli /c1/e8/s0 show all

storcli /c1/e8/s0 start locate
storcli /c1/e8/s0 set offline
storcli /c1/e8/s0 set online
storcli /c1/e8/s0 set jbod

StorCLI Help
#查看StorCLI帮助信息
[root@localhost Linux]# storcli -h
     Storage Command Line Tool  Ver 1.07.07 Nov 15, 2013

     (c)Copyright 2013, LSI Corporation, All Rights Reserved.


storcli -v 
storcli -h| -help| ? 
storcli -h| -help| ? legacy
storcli show 
storcli show all
storcli show ctrlcount
storcli /cx add vd r[0|1|5|6|00|10|50|60]
    [Size=<VD1_Sz>,<VD2_Sz>,..|all] [name=<VDNAME1>,..] 
    drives=e:s|e:s-x|e:s-x,y,e:s-x,y,z [PDperArray=x][SED]
    [pdcache=on|off|default][pi][DimmerSwitch(ds)=default|automatic(auto)|
    none|maximum(max)|MaximumWithoutCaching(maxnocache)]
    [wt|wb|awb][nora|ra] [direct|cached] [cachevd]
    [Strip=<8|16|32|64|128|256|512|1024>] [AfterVd=X] 
    [Spares = [e:]s|[e:]s-x|[e:]s-x,y] [force][ExclusiveAccess]
storcli /cx add vd each r0 [name=<VDNAME1>,..] [drives=e:s|e:s-x|e:s-x,y]
    [SED] [pdcache=on|off|default][pi] [DimmerSwitch(ds)=default|automatic(auto)|
    none|maximum(max)|MaximumWithoutCaching(maxnocache)] 
    [wt|wb|awb] [nora|ra] [direct|cached] 
    [Strip=<8|16|32|64|128|256|512|1024>] [ExclusiveAccess]
storcli /cx add VD cachecade|nytrocache r[aid][0,1,10, 1EC] 
    drives = [e:]s|[e:]s-x|[e:]s-x,y [WT| WB] [assignvds = 0,1,2] [BOOTVOLSIZE=x]
storcli /cx/
原文地址:https://www.cnblogs.com/dream397/p/13536550.html