ubuntu系统kubernetes1.18多master集群架构部署

目录

ubuntu系统kubernetes1.18多master集群架构部署演练

部署版本

ubuntu版本 20.04
docker版本 19.03.10
kubernetes版本 1.18.2

1 环境准备(所有主机)

主机名 ip
k8s-master01 10.0.0.101
k8s-master02 10.0.0.102
k8s-master03 10.0.0.103
k8s-node01 10.0.0.104

1.1 关闭防火墙

ufw disabled
systemctl disable ufw.service

1.2 关闭swap分区

swapoff -a 
sed -ri 's/.*swap.*/#&/' /etc/fstab

1.3 安装依赖包

apt install -y apt-transport-https apt-transport-https ca-certificates curl gnupg-agent software-properties-common lrzsz net-tools

1.4 添加系统内核变量

cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
EOF
sysctl --system

vim /etc/default/grub

# 添加参数
GRUB_CMDLINE_LINUX="cgroup_enable=memory swapaccount=1"

update-grub

1.5 设置时间

timedatectl set-timezone Asia/Shanghai
systemctl restart rsyslog

1.6 添加内核参数

echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
echo 1 >/proc/sys/net/bridge/bridge-nf-call-ip6tables
echo """
vm.swappiness = 0
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
""" > /etc/sysctl.conf


sysctl -p

1.7 修改fileter参数为 1 默认为 2（如果为2calico网络模式不支持）

1、修改后的文件
root@k8s-master01:~# cat /etc/sysctl.d/10-network-security.conf

# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks.
net.ipv4.conf.default.rp_filter=1
net.ipv4.conf.all.rp_filter=1

2、重置系统参数
sysctl --system

2 安装docker和kubernetes

2.1 docker安装

1、 添加docker源
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"

2、查看可安装的历史版本
apt  list docker-ce -a 

3、安装docker指定版本
apt install -y docker-ce=5:19.03.10~3-0~ubuntu-focal docker-ce-cli=5:19.03.10~3-0~ubuntu-focal containerd.io


systemctl enable docker && systemctl start docker

2.2 kubernetes安装

1、添加源
curl -s https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | sudo apt-key add -

tee /etc/apt/sources.list.d/kubernetes.list <<EOF 
deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
EOF

apt-get update

2、 查看可安装的版本
apt list kubeadm -a 


3、安装指定版本
apt install -y kubeadm=1.18.2-00 kubectl=1.18.2-00 kubelet=1.18.2-00


4、添加配置文件
vim /etc/systemd/system/kubelet.service.d/10-kubeadm.conf

Environment="cgroup-driver=systemd/cgroup-driver=cgroupfs"

5、 启动
systemctl enable kubelet && systemctl start kubelet

3 keepalived的安装

3.1 安装keepalived

在线安装

sudo apt-get install -y  libssl-dev openssl libpopt-dev

sudo apt-get install -y  keepalived

上传离线包

dpkg -i ipvsadm_1%3a1.31-1_amd64.deb 
dpkg -i keepalived_1%3a2.0.19-2_amd64.deb

3.2 编辑配置文件

3.2.1 master01配置文件

cat <<EOF > /etc/keepalived/keepalived.conf 
global_defs {
   router_id K8S-LIVE
}
vrrp_instance VI_1 {
    state BACKUP
    nopreempt
    interface ens32
    virtual_router_id 80
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass just0kk
    }
    virtual_ipaddress {
        10.0.0.200
    }
}
virtual_server 10.0.0.200 6443 {
    delay_loop 6
    lb_algo loadbalance
    lb_kind DR
    net_mask 255.255.255.0
    persistence_timeout 0
    protocol TCP
    real_server 10.0.0.101 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.102 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.103 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}
EOF

3.2.2 master02配置文件

cat <<EOF > /etc/keepalived/keepalived.conf 
global_defs {
   router_id K8S-LIVE
}
vrrp_instance VI_1 {
    state BACKUP
    nopreempt
    interface ens32
    virtual_router_id 80
    priority 50
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass just0kk
    }
    virtual_ipaddress {
        10.0.0.200
    }
}
virtual_server 10.0.0.200 6443 {
    delay_loop 6
    lb_algo loadbalance
    lb_kind DR    net_mask 255.255.255.0
    persistence_timeout 0
    protocol TCP
    real_server 10.0.0.101 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.102 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.103 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}
EOF

3.2.3 master03配置文

cat <<EOF > /etc/keepalived/keepalived.conf
global_defs {
   router_id K8S-LIVE
}
vrrp_instance VI_1 {
    state BACKUP
    nopreempt
    interface ens32
    virtual_router_id 80
    priority 30
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass just0kk
    }
    virtual_ipaddress {
        10.0.0.200
    }
}
virtual_server 10.0.0.200 6443 {
    delay_loop 6
    lb_algo loadbalance
    lb_kind DR
    net_mask 255.255.255.0
    persistence_timeout 0
    protocol TCP
    real_server 10.0.0.101 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.102 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 10.0.0.103 6443 {
        weight 1
        SSL_GET {
            url {
              path /healthz
              status_code 200
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}
EOF

启动keepalived

systemctl enable keepalived && systemctl start keepalived


观察设置的vip地址是否是正常在master01上

4 kubernetes集群加入

4.1 镜像导入

上传镜像

docker load -i   1-18-kube-apiserver.tar.gz
docker load -i   1-18-kube-scheduler.tar.gz
docker load -i   1-18-kube-controller-manager.tar.gz
docker load -i   1-18-pause.tar.gz
docker load -i   1-18-cordns.tar.gz
docker load -i   1-18-etcd.tar.gz
docker load -i   1-18-kube-proxy.tar.gz

说明：
pause版本是3.2，用到的镜像是k8s.gcr.io/pause:3.2
etcd版本是3.4.3，用到的镜像是k8s.gcr.io/etcd:3.4.3-0        
cordns版本是1.6.7，用到的镜像是k8s.gcr.io/coredns:1.6.7

apiserver、scheduler、controller-manager、kube-proxy版本是1.18.2，用到的镜像分别是
k8s.gcr.io/kube-apiserver:v1.18.2
k8s.gcr.io/kube-controller-manager:v1.18.2
k8s.gcr.io/kube-scheduler:v1.18.2
k8s.gcr.io/kube-proxy:v1.18.2

4.2 在master01节点上初始化k8s集群

cat << EOF > kubeadm-init.yaml
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.18.2
controlPlaneEndpoint: 10.0.0.200:6443
apiServer:
  certSANs:
  - 10.0.0.101
  - 10.0.0.102
  - 10.0.0.103
  - 10.0.0.104
  - 10.0.0.200
networking:
  podSubnet: 10.244.0.0/16
EOF
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind:  KubeProxyConfiguration
mode: ipvs

EOF

4.2.1 初始化命令

kubeadm init --config kubeadm-init.yaml |tee k8s-join.yaml

4.2.2 在master1节点执行如下，这样才能有权限操作k8s资源

mkdir -p $HOME/.kube
sudo cp -i  /etc/kubernetes/admin.conf  $HOME/.kube/config
sudo chown $(id -u):$(id -g)  $HOME/.kube/config

4.3 安装calico网络模式

4.3.1 传入calico镜像

docker load -i   cni.tar.gz
docker load -i   calico-node.tar.

在master01节点执行

kubectl apply -f calico.yaml

4.4 把master1节点的证书拷贝到master2和master3上

4.4.1 在master2和master3上创建证书存放目录

cd /root && mkdir -p /etc/kubernetes/pki/etcd &&mkdir -p ~/.kube/

4.4.2 执行shell脚本

cat << EOF > scp.sh
#!/bin/bash
USER=root
CONTROL_PLANE_IPS="10.0.0.102 10.0.0.103"
for host in ${CONTROL_PLANE_IPS}; do
	scp /etc/kubernetes/pki/ca.crt "${USER}"@$host:/etc/kubernetes/pki/ 
	scp /etc/kubernetes/pki/ca.key "${USER}"@$host:/etc/kubernetes/pki/ 
	scp /etc/kubernetes/pki/sa.key "${USER}"@$host:/etc/kubernetes/pki/
	scp /etc/kubernetes/pki/sa.pub "${USER}"@$host:/etc/kubernetes/pki/ 
	scp /etc/kubernetes/pki/front-proxy-ca.crt "${USER}"@$host:/etc/kubernetes/pki/
	scp /etc/kubernetes/pki/front-proxy-ca.key "${USER}"@$host:/etc/kubernetes/pki/ 
	scp /etc/kubernetes/pki/etcd/ca.crt "${USER}"@$host:/etc/kubernetes/pki/etcd/
	scp /etc/kubernetes/pki/etcd/ca.key "${USER}"@$host:/etc/kubernetes/pki/etcd/
    scp /etc/kubernetes/admin.conf "${USER}"@$host:/etc/kubernetes/
done
EOF

4.5 master02 和master03加入集群节点

--control-plane：这个参数表示加入到k8s集群的是master节点

  kubeadm join 10.0.0.200:6443 --token gehni0.8zgnoew2cjrd1pz7 
    --discovery-token-ca-cert-hash sha256:4967cb054bd5899af3e4b6ad3ab0c9f878b549ef7f72842d145b15f500e429ca 
    --control-plane

在master2和master3上操作：

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g)$HOME/.kube/config

4.6 node节点加入集群

kubeadm join 10.0.0.200:6443 --token gehni0.8zgnoew2cjrd1pz7 
    --discovery-token-ca-cert-hash sha256:4967cb054bd5899af3e4b6ad3ab0c9f878b549ef7f72842d145b15f500e429ca

查看集群状态信息

kubectl get nodes

显示如下：

NAME     STATUS   ROLES    AGE    VERSION
master1  Ready    master   39m    v1.18.2
master2  Ready    master   5m9s   v1.18.2
master3  Ready    master   2m33s  v1.18.2

踢出节点

kubectl删除节点
删除节点
1、驱逐节点上的pod：kubectl drain k8s-master --delete-local-data --force --ignore-daemonsets
2、删除节点：kubectl delete node 10.20.20.33
【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/dinghc/p/14919823.html