【大数据】关于Kafka的进一步理解

前置：

文件host

192.168.11.13
192.168.11.14
192.168.11.30

脚本init_kafka.sh

#!/bin/bash
source /etc/profile
if [ `whoami` != "root" ];then
    echo " only root can run me"
    exit 1
fi 
basepath=$(cd `dirname $0`; pwd)
cd $basepath

for host in `cat $basepath/host`;
do 
    sshp $host "useradd kafka"
    sshp $host "chown -R kafka:kafka /opt/kafka_2.11-0.8.2.2"
    sshp $host "mkdir  /data/kafka-log"
    sshp $host "mkdir  /data1/kafka-log"
    
    sshp $host "chown -R kafka:kafka /data/kafka-log"
    sshp $host "chown -R kafka:kafka /data1/kafka-log"
    echo "$host done"
done 
echo "done"

获取新增服务器host文件，迭代循环每个host服务器，分别新增一个kafka用户，然后将该服务器上的kafka安装文件夹修改所属权限为kafka用户，然后创建kafka-log的日志文件，分别放在/data和/data1下，然后修改kafka-log日志文件的所属权限为kafka用户。

总结起来就干了2个事：在新增的服务器节点上新增kafka用户并将kafka安装文件夹和日志文件夹的权限改为kafka用户。

脚本install_kafka.sh

#!/bin/bash
source /etc/profile
if [ `whoami` != "root" ];then
    echo " only root can run me"
    exit 1
fi 
basepath=$(cd `dirname $0`; pwd)
cd $basepath
kafka_tar=/opt/kafka_2.11-0.8.2.2.tgz
kafka_conf_dir=/opt/kafka_2.11-0.8.2.2/config
brokerid=101
for host in `cat $basepath/host`;
do
    echo $brokerid
    scpp $kafka_tar $host:/opt
    sshp $host "cd /opt;tar -zxf kafka_2.11-0.8.2.2.tgz"
    # 发送配置文件
    scpp $kafka_conf_dir/* $host:$kafka_conf_dir/
    # 修改broker.id
    sshp $host "sed -i 's/broker.id=87/broker.id=$brokerid/g' /opt/kafka_2.11-0.8.2.2/config/server.properties"
    # 修改 hostname
    sshp $host "sed -i 's/host.name=192.168.11.87/host.name=$host/g' /opt/kafka_2.11-0.8.2.2/config/server.properties"
    brokerid=$(($brokerid+1))
    echo "$host done"
done
echo 'done'

将该服务器下的kafka安装文件tar包复制到新增服务器的/opt下并解压，将kafka配置文件复制到服务器的配置文件夹下，修改101为host里面第一个ip的kafka的brokerid，并随着循环host而将brokerid数值+1，修改host的第一个ip为hostname，并随着循环host而将其他host的ip改为hostname。

总结起来就干了3个事：在新增的服务器节点上新增配置文件，并修改其中的brokerid和hostname为指定值

脚本start_all.sh

#!/bin/bash

source /etc/profile
basepath=$(cd `dirname $0`; pwd)
cd $basepath
for host in `cat $basepath/host`
do
    echo $host
    sh remote_start_kafka.sh $host
    echo "$host done"
done

循环执行，在host新增服务器里执行脚本remote_start_kafka.sh，并传递循环host列表的ip

总结起来就1个事：执行start_all.sh，启动全部的新增服务器的kafka服务

脚本remote_start_kafka.sh

#!/bin/bash
source /etc/profile
basepath=$(cd `dirname $0`; pwd)
cd $basepath

host=$1

scpp start_kafka.sh $host:/tmp/
scpp start.sh $host:/tmp/
sshp $host "sh /tmp/start.sh"

将start_kafka.sh和start.sh这个2个脚本复制到新增服务器的临时文件夹里，然后执行新增服务器上的start.sh脚本

总结起来就干了2个事：复制执行脚本到新增服务器上并执行其中的start.sh脚本

脚本start.sh

#!/bin/bash

sudo -u kafka bash -c "sh /tmp/start_kafka.sh"

总结起来就1个事：用kafka用户调用临时文件的start_kafka.sh脚本执行启动命令

 脚本start_kafka.sh

#!/bin/bash
source /etc/profile
export KAFKA_HEAP_OPTS="-Xmx8G";
JMX_PORT=9999 /opt/kafka_2.11-0.8.2.2/bin/kafka-server-start.sh -daemon /opt/kafka_2.11-0.8.2.2/config/server.properties;

总结起来就1个事：设置堆内存为最大8G，开启JMX端口9999，然后执行启动kafka的命令

Kafka的新增或者扩容服务器步骤：

1.将kafka的安装包kafka_2.11-0.8.2.2.tgz复制到所有新增服务器的/opt/下，并在当前文件夹解压，确保所有服务器都有 /opt/kafka_2.11-0.8.2.2和/opt/kafka_2.11-0.8.2.2.tgz

2.将host、init_kafka.sh、install_kafka.sh、remote_start_kafka.sh、start_all.sh、start_kafka.sh、start.sh 共计7个文件放在本机上（例如87服务器 /root/work/install_kafka）

3.修改host，加入服务器IP列表

4.执行init_kafka.sh —— 修改kafka安装文件夹和日志文件夹权限为kafka用户

5.执行install_kafka.sh —— 修改配置文件的brokerid和hostname

6.执行start_all.sh —— 依次调用执行 → remote_start_kafka.sh → star.sh → start_kafka.sh

Kafka：

用户：root、kafka

安装文件夹：/opt/kafka_2.11-0.8.2.2

配置文件：/opt/kafka_2.11-0.8.2.2/config/server.properties

日志文件夹：/data/kafka-log

 ----------------------------------------------------------------------------------------------------------------------------------------------

1.JMX

Kafka可以配置使用JMX进行运行状态的监控，既可以通过JDK自带Jconsole来观察结果，也可以通过Java API的方式来.也可以通过第三方程序如Yahoo的Kafka-manager
公司现在使用kafka-manager
 
关于监控指标的描述，可以参考：http://kafka.apache.org/documentation.html#monitoring
 
开启JMX

1.修改bin/kafka-server-start.sh，添加JMX_PORT参数，添加后样子如下

if [ "x$KAFKA_HEAP_OPTS" = "x" ]; then
    export KAFKA_HEAP_OPTS="-Xmx1G -Xms1G"
    export JMX_PORT="9999"
fi

 2.在kafka启动前加上，可以写在启动脚本里

export KAFKA_HEAP_OPTS="-Xmx8G";
JMX_PORT=9999 /opt/kafka_2.11-0.8.2.2/bin/kafka-server-start.sh -daemon /opt/kafka_2.11-0.8.2.2/config/server.properties;

通过JConsole连接

 通过JavaAPI

1.针对单个broker节点

package kafka.jmx;

import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import javax.management.*;
import javax.management.remote.JMXConnector;
import javax.management.remote.JMXConnectorFactory;
import javax.management.remote.JMXServiceURL;
import java.io.IOException;
import java.net.MalformedURLException;
import java.util.HashMap;
import java.util.Map;
import java.util.Set;

/**
 * Created by hidden on 2016/12/8.
 */
public class JmxConnection {
    private static Logger log = LoggerFactory.getLogger(JmxConnection.class);

    private MBeanServerConnection conn;
    private String jmxURL;
    private String ipAndPort = "localhost:9999";
    private int port = 9999;
    private boolean newKafkaVersion = false;

    public JmxConnection(Boolean newKafkaVersion, String ipAndPort){
        this.newKafkaVersion = newKafkaVersion;
        this.ipAndPort = ipAndPort;
    }

    public boolean init(){
        jmxURL = "service:jmx:rmi:///jndi/rmi://" +ipAndPort+ "/jmxrmi";
        log.info("init jmx, jmxUrl: {}, and begin to connect it",jmxURL);
        try {
            JMXServiceURL serviceURL = new JMXServiceURL(jmxURL);
            JMXConnector connector = JMXConnectorFactory.connect(serviceURL,null);
            conn = connector.getMBeanServerConnection();
            if(conn == null){
               log.error("get connection return null!");
                return  false;
            }
        } catch (MalformedURLException e) {
            e.printStackTrace();
            return false;
        } catch (IOException e) {
            e.printStackTrace();
            return false;
        }
        return true;
    }

    public String getTopicName(String topicName){
        String s;
        if (newKafkaVersion) {
            s = "kafka.server:type=BrokerTopicMetrics,name=MessagesInPerSec,topic=" + topicName;
        } else {
            s = ""kafka.server":type="BrokerTopicMetrics",name="" + topicName + "-MessagesInPerSec"";
        }
        return s;
    }

    /**
     * @param topicName: topic name, default_channel_kafka_zzh_demo
     * @return 获取发送量(单个broker的，要计算某个topic的总的发送量就要计算集群中每一个broker之和)
     */
public long getMsgInCountPerSec(String topicName){
    String objectName = getTopicName(topicName);
    Object val = getAttribute(objectName,"Count");
    String debugInfo = "jmxUrl:"+jmxURL+",objectName="+objectName;
    if(val !=null){
        log.info("{}, Count:{}",debugInfo,(long)val);
        return (long)val;
    }
    return 0;
}

    /**
     * @param topicName: topic name, default_channel_kafka_zzh_demo
     * @return 获取发送的tps，和发送量一样如果要计算某个topic的发送量就需要计算集群中每一个broker中此topic的tps之和。
     */
    public double getMsgInTpsPerSec(String topicName){
        String objectName = getTopicName(topicName);
        Object val = getAttribute(objectName,"OneMinuteRate");
        if(val !=null){
            double dVal = ((Double)val).doubleValue();
            return dVal;
        }
        return 0;
    }

    private Object getAttribute(String objName, String objAttr)
    {
        ObjectName objectName =null;
        try {
            objectName = new ObjectName(objName);
        } catch (MalformedObjectNameException e) {
            e.printStackTrace();
            return null;
        }
        return getAttribute(objectName,objAttr);
    }

    private Object getAttribute(ObjectName objName, String objAttr){
        if(conn== null)
        {
            log.error("jmx connection is null");
            return null;
        }

        try {
            return conn.getAttribute(objName,objAttr);
        } catch (MBeanException e) {
            e.printStackTrace();
            return null;
        } catch (AttributeNotFoundException e) {
            e.printStackTrace();
            return null;
        } catch (InstanceNotFoundException e) {
            e.printStackTrace();
            return null;
        } catch (ReflectionException e) {
            e.printStackTrace();
            return null;
        } catch (IOException e) {
            e.printStackTrace();
            return null;
        }
    }

    /**
     * @param topicName
     * @return 获取topicName中每个partition所对应的logSize(即offset)
     */
    public Map<Integer,Long> getTopicEndOffset(String topicName){
        Set<ObjectName> objs = getEndOffsetObjects(topicName);
        if(objs == null){
            return null;
        }
        Map<Integer, Long> map = new HashMap<>();
        for(ObjectName objName:objs){
            int partId = getParId(objName);
            Object val = getAttribute(objName,"Value");
            if(val !=null){
                map.put(partId,(Long)val);
            }
        }
        return map;
    }

    private int getParId(ObjectName objName){
        if(newKafkaVersion){
            String s = objName.getKeyProperty("partition");
            return Integer.parseInt(s);
        }else {
            String s = objName.getKeyProperty("name");

            int to = s.lastIndexOf("-LogEndOffset");
            String s1 = s.substring(0, to);
            int from = s1.lastIndexOf("-") + 1;

            String ss = s.substring(from, to);
            return Integer.parseInt(ss);
        }
    }

    private Set<ObjectName> getEndOffsetObjects(String topicName){
        String objectName;
        if (newKafkaVersion) {
            objectName = "kafka.log:type=Log,name=LogEndOffset,topic="+topicName+",partition=*";
        }else{
            objectName = ""kafka.log":type="Log",name="" + topicName + "-*-LogEndOffset"";
        }
        ObjectName objName = null;
        Set<ObjectName> objectNames = null;
        try {
            objName = new ObjectName(objectName);
            objectNames = conn.queryNames(objName,null);
        } catch (MalformedObjectNameException e) {
            e.printStackTrace();
            return  null;
        } catch (IOException e) {
            e.printStackTrace();
            return null;
        }

        return objectNames;
    }
}

这里采用三个监测项来演示如果使用jmx进行监控：

offset (集群中的一个topic下的所有partition的LogEndOffset值，即logSize)
sendCount(集群中的一个topic下的发送总量，这个值是集群中每个broker中此topic的发送量之和)
sendTps(集群中的一个topic下的TPS, 这个值也是集群中每个broker中此topic的发送量之和)

使用下面3个方法

public Map<Integer,Long> getTopicEndOffset(String topicName)
public long getMsgInCountPerSec(String topicName)
public double getMsgInTpsPerSec(String topicName)

2.对整个集群

package kafka.jmx;

import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;

/**
 * Created by hidden on 2016/12/8.
 */
public class JmxMgr {
    private static Logger log = LoggerFactory.getLogger(JmxMgr.class);
    private static List<JmxConnection> conns = new ArrayList<>();

    public static boolean init(List<String> ipPortList, boolean newKafkaVersion){
        for(String ipPort:ipPortList){
            log.info("init jmxConnection [{}]",ipPort);
            JmxConnection conn = new JmxConnection(newKafkaVersion, ipPort);
            boolean bRet = conn.init();
            if(!bRet){
                log.error("init jmxConnection error");
                return false;
            }
            conns.add(conn);
        }
        return true;
    }

    public static long getMsgInCountPerSec(String topicName){
        long val = 0;
        for(JmxConnection conn:conns){
            long temp = conn.getMsgInCountPerSec(topicName);
            val += temp;
        }
        return val;
    }

    public static double getMsgInTpsPerSec(String topicName){
        double val = 0;
        for(JmxConnection conn:conns){
            double temp = conn.getMsgInTpsPerSec(topicName);
            val += temp;
        }
        return val;
    }

    public static Map<Integer, Long> getEndOffset(String topicName){
        Map<Integer,Long> map = new HashMap<>();
        for(JmxConnection conn:conns){
            Map<Integer,Long> tmp = conn.getTopicEndOffset(topicName);
            if(tmp == null){
                log.warn("get topic endoffset return null, topic {}", topicName);
                continue;
            }
            for(Integer parId:tmp.keySet()){//change if bigger
                if(!map.containsKey(parId) || (map.containsKey(parId) && (tmp.get(parId)>map.get(parId))) ){
                    map.put(parId, tmp.get(parId));
                }
            }
        }
        return map;
    }

    public static void main(String[] args) {
        List<String> ipPortList = new ArrayList<>();
        ipPortList.add("xx.101.130.1:9999");
        ipPortList.add("xx.101.130.2:9999");
        JmxMgr.init(ipPortList,true);

        String topicName = "default_channel_kafka_zzh_demo";
        System.out.println(getMsgInCountPerSec(topicName));
        System.out.println(getMsgInTpsPerSec(topicName));
        System.out.println(getEndOffset(topicName));
    }
}

执行结果：

2016-12-08 19:25:32 -[INFO] - [init jmxConnection [xx.101.130.1:9999]] - [kafka.jmx.JmxMgr:20]
2016-12-08 19:25:32 -[INFO] - [init jmx, jmxUrl: service:jmx:rmi:///jndi/rmi://xx.101.130.1:9999/jmxrmi, and begin to connect it] - [kafka.jmx.JmxConnection:35]
2016-12-08 19:25:33 -[INFO] - [init jmxConnection [xx.101.130.2:9999]] - [kafka.jmx.JmxMgr:20]
2016-12-08 19:25:33 -[INFO] - [init jmx, jmxUrl: service:jmx:rmi:///jndi/rmi://xx.101.130.2:9999/jmxrmi, and begin to connect it] - [kafka.jmx.JmxConnection:35]
2016-12-08 20:45:15 -[INFO] - [jmxUrl:service:jmx:rmi:///jndi/rmi://xx.101.130.1:9999/jmxrmi,objectName=kafka.server:type=BrokerTopicMetrics,name=MessagesInPerSec,topic=default_channel_kafka_zzh_demo, Count:6000] - [kafka.jmx.JmxConnection:73]
2016-12-08 20:45:15 -[INFO] - [jmxUrl:service:jmx:rmi:///jndi/rmi://xx.101.130.2:9999/jmxrmi,objectName=kafka.server:type=BrokerTopicMetrics,name=MessagesInPerSec,topic=default_channel_kafka_zzh_demo, Count:4384] - [kafka.jmx.JmxConnection:73]
10384
3.915592283987704E-65
{0=2072, 1=2084, 2=2073, 3=2083, 4=2072}

观察运行结果可以发现 6000+4384 = 10384 = 2072+2084+2073+2083+2072，小伙伴们可以揣摩下原因。
可以通过jconsole连接service:jmx:rmi:///jndi/rmi://xx.101.130.1:9999/jmxrmi或者service:jmx:rmi:///jndi/rmi://xx.101.130.2:9999/jmxrmi来查看相应的数据值。如下图：

也可以通过命令行的形式来查看某项数据，不过这里要借助一个jar包：cmdline-jmxclient-0.xx.3.jar，这个请自行下载，网上很多。
将这个jar放入某一目录，博主这里放在了linux系统下的/root/util目录中，以offset举例：
0.8.1.x版-读取topic=default_channel_kafka_zzh_demo,partition=0的Value值：

java -jar cmdline-jmxclient-0.10.3.jar - xx.101.130.1:9999 '"kafka.log":type="Log",name="default_channel_kafka_zzh_demo-0-LogEndOffset"' Value

0.8.2.x版-读取topic=default_channel_kafka_zzh_demo,partition=0的Value值：

java -jar cmdline-jmxclient-0.10.3.jar - xx.101.130.1:9999 kafka.log:type=Log,name=LogEndOffset,topic=default_channel_kafka_zzh_demo,partition=0

看出规律了嘛？如果还是没有，博主再提示一个小技巧，你可以用Jconsole打开相应的属性，然后将鼠标浮于其上，Jconsole会跳出tooltips来提示怎么拼这些属性的ObjectName.

 ------------------------其他第三方软件

kafka-web-console

https://github.com/claudemamo/kafka-web-console
部署sbt：
http://www.scala-sbt.org/0.13/tutorial/Manual-Installation.html
http://www.scala-sbt.org/release/tutorial/zh-cn/Installing-sbt-on-Linux.html

KafkaOffsetMonitor

https://github.com/quantifind/KafkaOffsetMonitor/releases/tag/v0.2.0
java -cp KafkaOffsetMonitor-assembly-0.2.0.jar com.quantifind.kafka.offsetapp.OffsetGetterWeb --zk localhost:12181 --port 8080 --refresh 5.minutes --retain 1.day

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/dflmg/p/10394786.html