Table of Contents
Introduction
All instructions in this manual were tested on Centos 6.9 and CentOS 7.3. In order to install ClickHouse RPM packages from packagecloud.io repository, we need to register it (repo) with our yum, making yum avare of additional packages installable from packagecloud.io.
In general, repositories are listed in /etc/yum.repos.d folder, so we need to add packagecloud.io repository description in there.
This can be done either manually or via script, provided by packagecloud.io. In any case, as a result, we'll have ClickHouse packages available for installation via yum.
Let's start with script-based installation, since this approach looks like more user-friendly.
Script-based installation
For our convenience, packagecloud.io provides nice and user-friendly way to add repos with their script. We'll need to download and run packagecloud's bash script, which will do all required steps.
Install script
Ensure curl is installed on the system
sudo yum install -y curl
Let's download and run installation shell-script, provided by packagecloud.io
curl -s https://packagecloud.io/install/repositories/altinity/clickhouse/script.rpm.sh | sudo bash
Install packages after script
First of all, ensure we have ClickHouse packages available for installation
sudo yum list 'clickhouse*'
ClickHouse packages should be listed as available, something like this:
Available Packages
clickhouse-client.x86_64 1.1.54276-3.el7 altinity_clickhouse
clickhouse-compressor.x86_64 1.1.54276-3.el7 altinity_clickhouse
clickhouse-debuginfo.x86_64 1.1.54276-3.el7 altinity_clickhouse
clickhouse-server.x86_64 1.1.54276-3.el7 altinity_clickhouse
clickhouse-server-common.x86_64 1.1.54276-3.el7 altinity_clickhouse
Now let's install ClickHouse
sudo yum install -y 'clickhouse*'
and verify it is listed as installed
sudo yum list installed 'clickhouse*'
ClickHouse packages should be listed as installed, something like this:
Installed Packages
clickhouse-client.x86_64 1.1.54276-3.el7 @altinity_clickhouse
clickhouse-compressor.x86_64 1.1.54276-3.el7 @altinity_clickhouse
clickhouse-debuginfo.x86_64 1.1.54276-3.el7 @altinity_clickhouse
clickhouse-server.x86_64 1.1.54276-3.el7 @altinity_clickhouse
clickhouse-server-common.x86_64 1.1.54276-3.el7 @altinity_clickhouse
Ensure ClicKhouse server is running
sudo /etc/init.d/clickhouse-server restart
And connect to it with clickhouse-client
clickhouse-client
ClickHouse client version 1.1.54276.
Connecting to localhost:9000.
Connected to ClickHouse server version 1.1.54276.
:)
Well, all looks fine and ClickHouse installed from RPM packages!
We are all done!
Manual installation
Let's add packagecloud.io repo manually
Install required packages
We'll need two packages installed beforehands:
- pygpgme - helps handling gpg-signatures
- yum-utils - contains tools for handling source RPMs
sudo yum install -y pygpgme yum-utils
Create required files
Now let's create yum's repository configuration file: /etc/yum.repos.d/altinity_clickhouse.repo Depending on what CentOS version you are running you may need files for EL 6 or 7 version
EL6 repo file
For EL6 copy+paste into /etc/yum.repos.d/altinity_clickhouse.repo
[altinity_clickhouse]
name=altinity_clickhouse
baseurl=https://packagecloud.io/altinity/clickhouse/el/6/$basearch
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=https://packagecloud.io/altinity/clickhouse/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
[altinity_clickhouse-source]
name=altinity_clickhouse-source
baseurl=https://packagecloud.io/altinity/clickhouse/el/6/SRPMS
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=https://packagecloud.io/altinity/clickhouse/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
EL7 repo file
For EL7 copy+paste into /etc/yum.repos.d/altinity_clickhouse.repo
[altinity_clickhouse]
name=altinity_clickhouse
baseurl=https://packagecloud.io/altinity/clickhouse/el/7/$basearch
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=https://packagecloud.io/altinity/clickhouse/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
[altinity_clickhouse-source]
name=altinity_clickhouse-source
baseurl=https://packagecloud.io/altinity/clickhouse/el/7/SRPMS
repo_gpgcheck=1
gpgcheck=0
enabled=1
gpgkey=https://packagecloud.io/altinity/clickhouse/gpgkey
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
metadata_expire=300
Update cache
After repo files created, let's update yum's cache with packges from newly added altinity_clickhouse repo
sudo yum -q makecache -y --disablerepo='*' --enablerepo='altinity_clickhouse'
Install packages manually
Packages can be installed the same way as in section Install packages after script
Conclusion
Now we have ClickHouse RPM packages available for easy installation.
原文: https://github.com/Altinity/clickhouse-rpm-install