db2 v11 安装测试

一、准备环境：

介质： db2 v11 redhat7.3

关闭selinux

#setenforce 0

#vi /etc/selinux/config
修改如下：
SELINUX=disabled
#重启生效

vim /etc/yum/pluginconf.d/subscription-manager.conf

enabled=0 #将它禁用掉

配置本地yum

安装db2所需系统包

Validating "/lib/libpam.so*" ...
DBT3514W The db2prereqcheck utility failed to find the following 32-bit library file: "/lib/libpam.so*".
WARNING : Requirement not matched.
Requirement not matched for DB2 database "Server" with pureScale feature . Version: "11.1.3.3".
Summary of prerequisites that are not met on the current system:
DBT3514W The db2prereqcheck utility failed to find the following 32-bit library file: "/lib/libpam.so*".

DBT3514W The db2prereqcheck utility failed to find the following 32-bit library file: "libstdc++.so.6".

Required minimum version for "ksh": "20100621"
Actual version is undetermined

DBT3507E The db2prereqcheck utility failed to find the following package or file: "kernel-devel".

DBT3507E The db2prereqcheck utility failed to find the following package or file: "gcc-c++".

DBT3507E The db2prereqcheck utility failed to find the following package or file: "cpp".

DBT3507E The db2prereqcheck utility failed to find the following package or file: "gcc".

DBT3563E The db2prereqcheck utility determined that SELinux is enabled, which is not supported with GPFS.

yum install libstdc++.i686

yum install pam-devel.i686

yum groupinstall 'Infiniband Support'

yum install gcc 
yum install cpp
yum install gcc-c++
yum install kernel-devel
yum install ksh
yum install ntp
yum install sg3_utils
yum install libstdc++.so.6
yum install pam32*
yum install libcxgb*
yum install m4
yum install binutils-devel
yum install patch

提示libstdc++.so.5 is needed by 需要安装 包含 libstdc .so.5 的 compat-stdlibc rpm

rpm -ivh compat-libstdc++-33-3.2.3-72.el7.x86_64.rpm

rpm -ivh compat-libstdc++-33-3.2.3-72.el7.i686.rpm



  修改/etc/hosts如下配置：


  #vi /etc/hosts


  127.0.0.1    localhost



修改系统内核参数

# vi /etc/sysctl.conf

kernel.shmmax = 137438953472    --设置为物理内存的一半或稍大

kernel.shmall = 67108864

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 65536

net.ipv4.ip_local_port_range = 1024 65000

net.core.rmem_default=262144

net.core.rmem_max=262144


net.core.wmem_default=262144


net.core.wmem_max=262144






二、安装DB2软件




root用户执行

df -h 确保空间大小满足条件

vi /etc/security/limits

除notice之外设置参数为-1

mkdir /tmp/db2v11

chown db2inst1:db2iadm1 /tmp/db2v11

上传介质

chmod -R 777 /tmp/db2v11

gzip -d product.tar.gz

tar xvf product.tar

安装前验证 参考官网 https://www.ibm.com/docs/en/db2/11.1?topic=servers-linux

./db2prereqcheck

安装


./db2_install

安装目录，选择推荐目录即可(可以修改目录，如果不修改/预留大小为6G)

Enter "help" to redisplay product names. --------------- 选择安装产品类型，这里选择SERVER
Do you want to install the DB2 pureScale Feature? [yes/no] ---------------- 选择是否安装pureScale功能，这里选择不安装

生成如下目录
/opt/ibm/db2/V11.1

/tmp/生成install日志，查看并确认





三、创建Instance




1. 创建DB2实例                        
    以下操作全部以root用户执行                    
    groupadd db2iadm1                    
    groupadd db2fadm1                    
                        
    useradd db2inst1 -G db2iadm1                    
    passwd db2inst1                    
    Changing password for user db2inst1.                    
    New password: input your password                    
    Retype new password: retype input your password                    
                        
    useradd db2fenc1 -G db2fadm1                    
    cd /opt/ibm/db2/V11.1/instance/                    
    ./db2icrt -a server -p 50000 -u db2fenc1 db2inst1                    
                        
    开放端口50000，以便用户可以访问                    
    firewall-cmd --zone=public --add-port=50000/tcp --permanent                    
    systemctl stop firewalld.service                    
    systemctl start firewalld.service            


2. 激活license                                        
    以下操作全部以db2inst1用户执行                                    
    查看license信息                                    
    db2licm -l                                    
                                        
    license激活                                    
    db2licm -a /usr/local/src/db2ese_c.lic









方式二 指定 用户ID和密码
创建用户和组
用户用途 用户名 用户组
实例所有者 db2inst1 db2iadm1
受防护的用户 db2fenc1 db2fadm1

# groupadd -g 1011 db2iadm1

# groupadd -g 1012 db2fadm1

# useradd -u 1013 -g db2iadm1 -d /home/db2inst1 -m db2inst1

# useradd -u 1014 -g db2fadm1 -d /home/db2fenc1 -m db2fenc1

# echo 'db2inst1' |passwd --stdin db2inst1

# echo 'db2fenc1' |passwd --stdin db2fenc1

#cd /opt/ibm/db2/V11.1/instance
#./db2icrt -a server -p 50000 -u db2fenc1 db2inst1  


The execution completed successfully.


For more information see the DB2 installation log at "/tmp/db2icrt.log.9503".
DBI1070I  Program db2icrt completed successfully.


2. 激活license                                        
    以下操作全部以db2inst1用户执行                                    
    查看license信息                                    
    db2licm -l                                    
                                        
    license激活                                    
    db2licm -a /usr/local/src/db2ese_c.lic                                     






创建DB文件系统并赋权给用户db2inst1


# chown db2inst1:db2iadm1 /data

# chown db2inst1:db2iadm1 /db2log

# chown db2inst1:db2iadm1 /db2arch




四、配置并启动Instance






# /opt/ibm/db2/V11.1/instance/db2ilist




db2inst1


(1)  修改db2nodes.cfg


位置在instance用户的$HOME/sqllib/.文件格式是:


<logic port> <hostname> <logic port>     //主机名要与/etc/hosts 的主机名一致 或hostname命令查看


0 r201 0


1 r201 1


(2)  检查services文件（多节点配置自动生成多个服务端口）


vi  /etc/services    -G 跳到最后一行


#DB2c_db2inst1   50000/tcp      // 要与dbm SVCENAME一致


 


(3) 启动实例：  --切换到db2inst1用户


配置环境变量  --root用户和db2inst1用户


# vi ~/.bash_profile


$ vi ~/.bash_profile


./home/db2inst1/sqllib/db2profile  # 增加该行代码


# source ~/.bash_profile


$ source ~/.bash_profile


设置服务名称


$ db2 update dbm cfg using SVCENAME db2inst1


设置注册变量


$ db2set DB2COMM=tcpip


启动实例


$ db2start






五、创建DB




$ db2 "create db RESDB on /oradata4 using codeset UTF-8 territory cn"

DB20000I  The CREATE DATABASE command completed successfully.

批注：创建数据库时若为指定路径，将使用默认路径，数据库用户的家目录，如下查看：

$ db2 get dbm cfg | grep -i DFTDBPATH

 Default database path                       (DFTDBPATH) = /home/db2inst1

9.参数调整


$ db2 connect to resdb


$ db2iauto -on db2inst1   --设置数据库实例开机自启动


9.1参数调整


$ db2 update dbm cfg using SVCENAME 9999 DFT_MON_BUFPOOL on DFT_MON_UOW on NUM_POOLAGENTS 4100


DB20000I  The UPDATE DATABASE MANAGER CONFIGURATION command completed successfully.


SQL1362W  One or more of the parameters submitted for immediate modification


were not changed dynamically. Client changes will not be effective until the


next time the application is started or the TERMINATE command has been issued.


Server changes will not be effective until the next DB2START command.



批注：需要重启数据库生效


9.2日志调整


--日志位置和大小调整


$ db2 update db cfg for RESDB using NEWLOGPATH /db2log


$ db2 update db cfg for RESDB using LOGARCHMETH1 disk:/db2arch


$ db2 update db cfg for RESDB using LOGFILSIZ 25600 LOGPRIMARY 13 LOGSECOND 12  CATALOGCACHE_SZ 2048 LOGBUFSZ 4096 UTIL_HEAP_SZ 10240 DB_MEM_THRESH 100 DLCHKTIME 5000 LOCKTIMEOUT 15



9.3其他参数调整


db2set DB2_PARALLEL_IO=*


db2set DB2_SKIPINSERTED=YES


db2set DB2_USE_ALTERNATE_PAGE_CLEANING=YES


db2set DB2_EVALUNCOMMITTED=YES


db2set DB2_ANTIJOIN=EXTEND


db2set DB2_SKIPDELETED=YES


db2set DB2CODEPAGE=1208


参数调整完毕，数据库重启：


$ db2stop


01/23/2017 13:48:24     0   0   SQL1025N  The database manager was not stopped because databases are still active.


SQL1025N  The database manager was not stopped because databases are still active.


$ db2 force application all


DB20000I  The FORCE APPLICATION command completed successfully.


DB21024I  This command is asynchronous and may not be effective immediately.


$ db2stop


01/23/2017 13:49:39     0   0   SQL1064N  DB2STOP processing was successful.


SQL1064N  DB2STOP processing was successful.


$ db2start


01/23/2017 13:50:13     0   0   SQL1063N  DB2START processing was successful.


SQL1063N  DB2START processing was successful.







此时需要调整/etc/security/limits.conf配置文件

db2list1  soft nofile 65536

db2inst1  hard nofile 65536

db2inst1  soft nproc  65536

db2inst1  hard nproc  65536






        

	      

	    

	  

	  

	    
      
        【推广】
        免费学中医，健康全家人
      
	  

    

    

          原文地址：https://www.cnblogs.com/dahaoran/p/9191748.html