ISIS Lab 重分布直连

Lab

在R4上对isis和ospf做双向重分布后,在R5上查看路由表如下:
Gateway of last resort is not set                                   
                                                                    
     1.0.0.0/32 is subnetted, 1 subnets                             
O E2    1.1.1.1 [110/20] via 45.1.1.4, 00:00:21, FastEthernet0/0.45 
     2.0.0.0/32 is subnetted, 1 subnets                             
O E2    2.2.2.2 [110/20] via 45.1.1.4, 00:00:21, FastEthernet0/0.45 
     3.0.0.0/32 is subnetted, 1 subnets                             
O E2    3.3.3.3 [110/20] via 45.1.1.4, 00:00:21, FastEthernet0/0.45 
     5.0.0.0/32 is subnetted, 1 subnets                             
C       5.5.5.5 is directly connected, Loopback0                    
     23.0.0.0/24 is subnetted, 1 subnets                            
O E2    23.1.1.0 [110/20] via 45.1.1.4, 00:00:21, FastEthernet0/0.45
     12.0.0.0/24 is subnetted, 1 subnets                            
O E2    12.1.1.0 [110/20] via 45.1.1.4, 00:00:21, FastEthernet0/0.45
     45.0.0.0/24 is subnetted, 1 subnets                            
C       45.1.1.0 is directly connected, FastEthernet0/0.45          

R5路由表没有4.4.4.4网段是因为ISIS是基于节点(相当于每台设备)的寻址方案仅仅要求每个节点具有一个地址,所以不会把直连网段发给R5
若要R5收到直连网段需要在R4进行重分布直连
R4(config)#router ospf 100
R4(config-router)#redistribute connected subnets 

原文地址:https://www.cnblogs.com/cyrusxx/p/12824182.html