Win64 驱动内核编程-16.WFP网络监控驱动（防火墙）

WFP驱动监控网络

    WFP 是微软推出来替代 TDI HOOK、NDIS HOOK 等拦截网络通信的方案，WFP 的框架非常庞大，在 RING3 和 RING0 各有一套类似的函数，令人兴奋的是，即使在 R3 使用 WFP，也可以做到全局拦截访问网络。由于 WFP 的范围太广，实在难以一言概括，感兴趣的朋友可以自行到 MSDN 上查看微软对它的官方概述。本文的目的，是给大家理顺 WFP 的框架，并利用 WFP 拦截指定进程访问网络，或拦截对指定 IP 地址/端口的访问。

    一个标准的 WFP 程序大体是这样子的： 首先使用 FwpmEngineOpen  开启 WFP  引擎 （获得个 一个 WFP  的 使用 句柄） ）用 ，然后用 FwpmTransactionBegin  设置 对网络通信 内容 的 过滤 权限（是只读） 还是允许修改） ， 然后用 FwpsCalloutRegister 、FwpmCalloutAdd 、FwpmFilterAdd  选择你 要过滤的内容， 并 添加 过滤器对象 和 回调函数， 最后用 用 FwpmTransactionCommit  确认刚才的内容， 让 刚才添加的 回调函数 开始生效 。 当用 你不用 WFP  的 时候， 就要用FwpmFilterDeleteById 、FwpmCalloutDeleteById 、FwpsCalloutUnregisterById  把你刚才添加的过滤器对象和回调函数删除掉，然后用 用 FwpmEngineClose  关闭 WFP 擎 引擎 （ 类似于 关闭句柄） ）。

     一个概述已经是这样子了，实现起来就更加麻烦了。为了方便大家学习，作者（胡文亮）已经把微软的 WFP 实例进行了最大简化，并把核心的注册回调功能封装成了一个函数。下面一步一步进行分析。在具体分析之前，有一些重要的内容需要先说明，否则后面的内容肯定会让大家一头雾水。一、WFP  一次性 要 注册的回调函数 不是 1  个 ，而是 3  个 。 但只有 1  个 是 “ 事前 ”回调， 另外 2  个 都是 “ 事后 ” 回调 （一般 只 使用“ 事前 ” 回调 ，不使用“ 事后 ”回调） ）。二、WFP  能过滤 的内容很多，你必须选择一个 感兴趣的内容。 这个“ 感 兴趣 的 内容” 用官话来说叫做 “过滤 条件标志 ”， 这货 其实 是一个 常量 ， 由于我们是 要过滤进程联网， 而且 一般都是用 IPV4  协议，所以 “过滤 条件标志 ”为 为 FWPM_LAYER_ALE_AUTH_CONNECT_V4 （ 在 这个

页面 可以的 查到所有的 “过滤 条件标志” ”） ）。三、 你个 必须为这个 “过滤 条件标志 ”指定一个 GUID ，当然 GUID  的 值 随便设置 就行 ，只要 在 系统范围内不重复。 。 代码中的 GUID  就是 随意设定的，它的名称为：GUID_ALE_AUTH_CONNECT_CALLOUT_V4。

 

我用的VS2015+wdk10开发的，VS15里面需要设置这些东西：

添加库：ntoskrnl.lib ndis.lib fwpkclnt.lib uuid.lib

添加宏定义：NDIS_SUPPORT_NDIS6

 注册的代码：

NTSTATUS RegisterCalloutForLayer
(
    IN const GUID* layerKey,
    IN const GUID* calloutKey,
    IN FWPS_CALLOUT_CLASSIFY_FN classifyFn,
    IN FWPS_CALLOUT_NOTIFY_FN notifyFn,
    IN FWPS_CALLOUT_FLOW_DELETE_NOTIFY_FN flowDeleteNotifyFn,
    OUT UINT32* calloutId,
    OUT UINT64* filterId
)
{
NTSTATUS        status = STATUS_SUCCESS;
FWPS_CALLOUT    sCallout = {0};
FWPM_FILTER     mFilter = {0};
FWPM_FILTER_CONDITION mFilter_condition[1] = {0};
FWPM_CALLOUT    mCallout = {0};
FWPM_DISPLAY_DATA mDispData = {0};
BOOLEAN         bCalloutRegistered = FALSE; 
sCallout.calloutKey = *calloutKey;
sCallout.classifyFn = classifyFn;
sCallout.flowDeleteFn = flowDeleteNotifyFn;
sCallout.notifyFn = notifyFn;
//要使用哪个设备对象注册
status = FwpsCalloutRegister( gDevObj,&sCallout,calloutId );
if( !NT_SUCCESS(status))
goto exit;
bCalloutRegistered = TRUE;
mDispData.name = L"WFP TEST";
mDispData.description = L"TESLA.ANGELA's WFP TEST";
//你感兴趣的内容
mCallout.applicableLayer = *layerKey;
//你感兴趣的内容的GUID
mCallout.calloutKey = *calloutKey;
mCallout.displayData = mDispData;
//添加回调函数
status = FwpmCalloutAdd( gEngineHandle,&mCallout,NULL,NULL);
if( !NT_SUCCESS(status))
goto exit;
mFilter.action.calloutKey = *calloutKey;
//在callout里决定
mFilter.action.type = FWP_ACTION_CALLOUT_TERMINATING;
mFilter.displayData.name = L"WFP TEST";
mFilter.displayData.description = L"TESLA.ANGELA's WFP TEST";
mFilter.layerKey = *layerKey;
mFilter.numFilterConditions = 0;
mFilter.filterCondition = mFilter_condition;
mFilter.subLayerKey = FWPM_SUBLAYER_UNIVERSAL;
mFilter.weight.type = FWP_EMPTY;
//添加过滤器
status = FwpmFilterAdd( gEngineHandle,&mFilter,NULL,filterId );
if( !NT_SUCCESS( status))
goto exit;
exit:
if( !NT_SUCCESS(status))
{
if( bCalloutRegistered )
{
FwpsCalloutUnregisterById( *calloutId );
}
}
return status;
}
NTSTATUS WallRegisterCallouts()
{
NTSTATUS    status = STATUS_SUCCESS;
BOOLEAN     bInTransaction = FALSE;
BOOLEAN     bEngineOpened = FALSE;
FWPM_SESSION session = {0};
session.flags = FWPM_SESSION_FLAG_DYNAMIC;
//开启WFP引擎
status = FwpmEngineOpen( NULL,
                         RPC_C_AUTHN_WINNT,
                         NULL,
                         &session,
                         &gEngineHandle );
if( !NT_SUCCESS(status))
goto exit;
bEngineOpened = TRUE;
//确认过滤权限
status = FwpmTransactionBegin( gEngineHandle,0 );
if( !NT_SUCCESS(status))
goto exit;
bInTransaction = TRUE;
//注册回调函数
status = RegisterCalloutForLayer(
             &FWPM_LAYER_ALE_AUTH_CONNECT_V4,
             &GUID_ALE_AUTH_CONNECT_CALLOUT_V4,
             WallALEConnectClassify,
             WallNotifyFn,
             WallFlowDeleteFn,
             &gAleConnectCalloutId,
             &gAleConnectFilterId);
if( !NT_SUCCESS(status))
{
DbgPrint("RegisterCalloutForLayer-FWPM_LAYER_ALE_AUTH_CONNECT_V4 failed!
");
goto exit;
}
//确认所有内容并提交，让回调函数正式发挥作用
status = FwpmTransactionCommit(gEngineHandle );
if( !NT_SUCCESS(status))
goto exit;
bInTransaction = FALSE;
exit:
if( !NT_SUCCESS(status))
{
if( bInTransaction)
{
FwpmTransactionAbort( gEngineHandle );
}
if( bEngineOpened )
{
FwpmEngineClose( gEngineHandle );
gEngineHandle = 0;
}
}
return status;
}

注销的代码：

NTSTATUS WallUnRegisterCallouts()
{
if( gEngineHandle != 0 )
{
//删除FilterId
FwpmFilterDeleteById( gEngineHandle,gAleConnectFilterId );
//删除CalloutId
FwpmCalloutDeleteById( gEngineHandle,gAleConnectCalloutId );
//清空FilterId
gAleConnectFilterId = 0;
//反注册CalloutId
FwpsCalloutUnregisterById( gAleConnectCalloutId );
//清空CalloutId
gAleConnectCalloutId = 0;
//关闭引擎
FwpmEngineClose( gEngineHandle );
gEngineHandle = 0;
}
return STATUS_SUCCESS;
}

三个回调函数以及其他：

#include <ntddk.h>
#pragma warning(push)
#pragma warning(disable:4201)       // unnamed struct/union
#pragma warning(disable:4995)
#include <ndis.h>
#include <fwpsk.h>
#pragma warning(pop)
#include <fwpmk.h>
#include <limits.h>
#include <ws2ipdef.h>
#include <in6addr.h>
#include <ip2string.h>
#include <strsafe.h>
#include <wdm.h>
 
#define INITGUID
#include <guiddef.h>
#define bool BOOLEAN
#define true TRUE 
#define false FALSE
#define DEVICE_NAME L"\Device\MyDriver"
#define DEVICE_DOSNAME L"\DosDevices\MyDriver"
#define kmalloc(_s) ExAllocatePoolWithTag(NonPagedPool, _s, 'SYSQ')
#define kfree(_p) ExFreePool(_p)
 
DEFINE_GUID // {6812FC83-7D3E-499a-A012-55E0D85F348B}
(
GUID_ALE_AUTH_CONNECT_CALLOUT_V4, 
0x6812fc83, 
0x7d3e, 
0x499a, 
0xa0, 0x12, 0x55, 0xe0, 0xd8, 0x5f, 0x34, 0x8b
);
 
PDEVICE_OBJECT  gDevObj;
 
HANDLE	gEngineHandle = 0;
HANDLE	gInjectHandle = 0;
//CalloutId
UINT32	gAleConnectCalloutId = 0;
//FilterId
UINT64	gAleConnectFilterId = 0;
 
/*
以下两个回调函数没啥用
*/
NTSTATUS NTAPI WallNotifyFn
(
    IN FWPS_CALLOUT_NOTIFY_TYPE  notifyType,
    IN const GUID  *filterKey,
    IN const FWPS_FILTER  *filter
)
{
return STATUS_SUCCESS;
}
 
VOID NTAPI WallFlowDeleteFn
(
    IN UINT16  layerId,
    IN UINT32  calloutId,
    IN UINT64  flowContext
)
{
return;
}
 
//协议代码转为名称
char* ProtocolIdToName(UINT16 id)
{
char *ProtocolName=kmalloc(16);
switch(id)	//http://www.ietf.org/rfc/rfc1700.txt
{
case 1:
strcpy_s(ProtocolName,4+1,"ICMP");
break;
case 2:
strcpy_s(ProtocolName,4+1,"IGMP");
break;
case 6:
strcpy_s(ProtocolName,3+1,"TCP");
break;
case 17:
strcpy_s(ProtocolName,3+1,"UDP");
break;
case 27:
strcpy_s(ProtocolName,3+1,"RDP");
break;
default:
strcpy_s(ProtocolName,7+1,"UNKNOWN");
break;
}
return ProtocolName;
}
 
//最重要的过滤函数
//http://msdn.microsoft.com/en-us/library/windows/hardware/ff551238(v=vs.85).aspx
void NTAPI WallALEConnectClassify
(
    IN const FWPS_INCOMING_VALUES0* inFixedValues,
    IN const FWPS_INCOMING_METADATA_VALUES0* inMetaValues,
    IN OUT void* layerData,
    IN const void* classifyContext,
    IN const FWPS_FILTER* filter,
    IN UINT64 flowContext,
    OUT FWPS_CLASSIFY_OUT* classifyOut
)
{
char *ProtocolName=NULL;
DWORD LocalIp,RemoteIP;
LocalIp=inFixedValues->incomingValue[FWPS_FIELD_ALE_AUTH_CONNECT_V4_IP_LOCAL_ADDRESS].value.uint32;
RemoteIP=inFixedValues->incomingValue[FWPS_FIELD_ALE_AUTH_CONNECT_V4_IP_REMOTE_ADDRESS].value.uint32;
ProtocolName=ProtocolIdToName(inFixedValues->incomingValue[FWPS_FIELD_ALE_AUTH_CONNECT_V4_IP_PROTOCOL].value.uint16);
DbgPrint("[WFP]IRQL=%d;PID=%ld;Path=%S;Local=%u.%u.%u.%u:%d;Remote=%u.%u.%u.%u:%d;Protocol=%s
",
         (USHORT)KeGetCurrentIrql(),
         (DWORD)(inMetaValues->processId),
         (PWCHAR)inMetaValues->processPath->data,	//NULL,//
         (LocalIp>>24)&0xFF,(LocalIp>>16)&0xFF,(LocalIp>>8)&0xFF,LocalIp&0xFF,
         inFixedValues->incomingValue[FWPS_FIELD_ALE_AUTH_CONNECT_V4_IP_LOCAL_PORT].value.uint16,
         (RemoteIP>>24)&0xFF,(RemoteIP>>16)&0xFF,(RemoteIP>>8)&0xFF,RemoteIP&0xFF,
         inFixedValues->incomingValue[FWPS_FIELD_ALE_AUTH_CONNECT_V4_IP_REMOTE_PORT].value.uint16,
 ProtocolName);
kfree(ProtocolName);
classifyOut->actionType = FWP_ACTION_PERMIT;//允许连接
 
//禁止IE联网（设置“行动类型”为FWP_ACTION_BLOCK）
// if(wcsstr((PWCHAR)inMetaValues->processPath->data,L"iexplore.exe"))
// {
// classifyOut->actionType = FWP_ACTION_BLOCK;
// classifyOut->rights &= ~FWPS_RIGHT_ACTION_WRITE;
// classifyOut->flags |= FWPS_CLASSIFY_OUT_FLAG_ABSORB;
// }
return;
}
执行结果，进行网络监控，并且禁止ie访问网络：


刚刚看有一个哥们写的也不错，留在这方便以后用的时候一起查看：

http://blog.csdn.net/rodney443220/article/details/37653793

还有一点要注意。回调函数执行的时候IRQL不一定是0，还可能是2，看上面图片输出。

 

【推广】 免费学中医，健康全家人
原文地址：https://www.cnblogs.com/csnd/p/12062014.html