FlagsAttribute Class

Indicates that an enumeration can be treated as a bit field; that is, a set of flags.

[System.AttributeUsage(System.AttributeTargets.Enum, Inherited=false)]
public class FlagsAttribute : Attribute

Remarks

Bit fields are generally used for lists of elements that might occur in combination, whereas enumeration constants are generally used for lists of mutually exclusive elements. Therefore, bit fields are designed to be combined with a bitwise OR operation to generate unnamed values, whereas enumerated constants are not. Languages vary in their use of bit fields compared to enumeration constants.

Attributes of the FlagsAttribute

AttributeUsageAttribute is applied to this class, and its Inherited property specifies false. This attribute can only be applied to enumerations.

Guidelines for FlagsAttribute and Enum

Use the FlagsAttribute custom attribute for an enumeration only if a bitwise operation (AND, OR, EXCLUSIVE OR) is to be performed on a numeric value.
Define enumeration constants in powers of two, that is, 1, 2, 4, 8, and so on. This means the individual flags in combined enumeration constants do not overlap.
Consider creating an enumerated constant for commonly used flag combinations. For example, if you have an enumeration used for file I/O operations that contains the enumerated constants Read = 1 and Write = 2, consider creating the enumerated constant ReadWrite = Read OR Write, which combines the Read and Write flags. In addition, the bitwise OR operation used to combine the flags might be considered an advanced concept in some circumstances that should not be required for simple tasks.
Use caution if you define a negative number as a flag enumerated constant because many flag positions might be set to 1, which might make your code confusing and encourage coding errors.
A convenient way to test whether a flag is set in a numeric value is to perform a bitwise AND operation between the numeric value and the flag enumerated constant, which sets all bits in the numeric value to zero that do not correspond to the flag, then test whether the result of that operation is equal to the flag enumerated constant.
Use None as the name of the flag enumerated constant whose value is zero. You cannot use the None enumerated constant in a bitwise AND operation to test for a flag because the result is always zero. However, you can perform a logical, not a bitwise, comparison between the numeric value and the None enumerated constant to determine whether any bits in the numeric value are set.

If you create a value enumeration instead of a flags enumeration, it is still worthwhile to create a None enumerated constant. The reason is that by default the memory used for the enumeration is initialized to zero by the common language runtime. Consequently, if you do not define a constant whose value is zero, the enumeration will contain an illegal value when it is created.

If there is an obvious default case your application needs to represent, consider using an enumerated constant whose value is zero to represent the default. If there is no default case, consider using an enumerated constant whose value is zero that means the case that is not represented by any of the other enumerated constants.
Do not define an enumeration value solely to mirror the state of the enumeration itself. For example, do not define an enumerated constant that merely marks the end of the enumeration. If you need to determine the last value of the enumeration, check for that value explicitly. In addition, you can perform a range check for the first and last enumerated constant if all values within the range are valid.
Do not specify enumerated constants that are reserved for future use.
When you define a method or property that takes an enumerated constant as a value, consider validating the value. The reason is that you can cast a numeric value to the enumeration type even if that numeric value is not defined in the enumeration.

What does the [Flags] Enum Attribute mean in C#?

The [Flags] attribute should be used whenever the enumerable represents a collection of possible values, rather than a single value. Such collections are often used with bitwise operators, for example:

var allowedColors = MyColor.Red | MyColor.Green | MyColor.Blue;

Note that the [Flags] attribute doesn't enable this by itself - all it does is allow a nice representation by the .ToString() method:

enum Suits { Spades = 1, Clubs = 2, Diamonds = 4, Hearts = 8 }
[Flags] enum SuitsFlags { Spades = 1, Clubs = 2, Diamonds = 4, Hearts = 8 }

...

var str1 = (Suits.Spades | Suits.Diamonds).ToString();
           // "5"
var str2 = (SuitsFlags.Spades | SuitsFlags.Diamonds).ToString();
           // "Spades, Diamonds"

It is also important to note that [Flags] does not automatically make the enum values powers of two. If you omit the numeric values, the enum will not work as one might expect in bitwise operations, because by default the values start with 0 and increment.

Incorrect declaration:

[Flags]
public enum MyColors
{
    Yellow,  // 0
    Green,   // 1
    Red,     // 2
    Blue     // 3
}

The values, if declared this way, will be Yellow = 0, Green = 1, Red = 2, Blue = 3. This will render it useless as flags.

Here's an example of a correct declaration:

[Flags]
public enum MyColors
{
    Yellow = 1,
    Green = 2,
    Red = 4,
    Blue = 8
}

To retrieve the distinct values in your property, one can do this:

if (myProperties.AllowedColors.HasFlag(MyColor.Yellow))
{
    // Yellow is allowed...
}

or prior to .NET 4:

if((myProperties.AllowedColors & MyColor.Yellow) == MyColor.Yellow)
{
    // Yellow is allowed...
}

if((myProperties.AllowedColors & MyColor.Green) == MyColor.Green)
{
    // Green is allowed...
}

Under the covers

This works because you used powers of two in your enumeration. Under the covers, your enumeration values look like this in binary ones and zeros:

 Yellow: 00000001
 Green:  00000010
 Red:    00000100
 Blue:   00001000

Similarly, after you've set your property AllowedColors to Red, Green and Blue using the binary bitwise OR | operator, AllowedColors looks like this:

myProperties.AllowedColors: 00001110

So when you retrieve the value you are actually performing bitwise AND & on the values:

myProperties.AllowedColors: 00001110
             MyColor.Green: 00000010
             -----------------------
                            00000010 // Hey, this is the same as MyColor.Green!

The None = 0 value

And regarding the use of 0 in your enumeration, quoting from MSDN:

[Flags]
public enum MyColors
{
    None = 0,
    ....
}

Use None as the name of the flag enumerated constant whose value is zero. You cannot use the None enumerated constant in a bitwise AND operation to test for a flag because the result is always zero. However, you can perform a logical, not a bitwise, comparison between the numeric value and the None enumerated constant to determine whether any bits in the numeric value are set.

You can find more info about the flags attribute and its usage at msdn and designing flags at msdn

Enum.Parse Method

Colors orange = (Colors) Enum.Parse(typeof(Colors), "Red, Yellow"); 解析组合的enum，只需要逗号+空格进行分隔，就可以识别

using System;

public class ParseTest
{
    [Flags]
    enum Colors { Red = 1, Green = 2, Blue = 4, Yellow = 8 };

    public static void Main()
    {
        Console.WriteLine("The entries of the Colors enumeration are:");
        foreach (string colorName in Enum.GetNames(typeof(Colors)))
        {
            Console.WriteLine("{0} = {1:D}", colorName,
                                         Enum.Parse(typeof(Colors), colorName));
        }
        Console.WriteLine();

        Colors orange = (Colors) Enum.Parse(typeof(Colors), "Red, Yellow");
        Console.WriteLine("The orange value {0:D} has the combined entries of {0}",
                           orange);
    }
}

/*
This code example produces the following results:

The entries of the Colors Enum are:
Red = 1
Green = 2
Blue = 4
Yellow = 8

The orange value 9 has the combined entries of Red, Yellow

*/